[Freeswitch-users] ext sip & rtp IP trouble

kokoska rokoska kokoska.rokoska at post.cz
Sun Aug 16 23:08:51 PDT 2009


Thank you very much, Brian, for your help!

I have just upgraded to curent trunk, but all remains the same - RTPs
from both endpoints arrives to the FreeSWITCH but no RTPs are send back
from FS (using ngrep I can't see even single RTP packet comming from FS).

I think it is due to my misconfiguration, but I have no idea where.

I have trid to blindly modify followed params to (I hope) all possible
values combination (including manual ones :-), but with no luck:

<param name='apply-nat-acl' value='rfc1918.auto'/>
<param name='local-network-acl' value='localnet.auto'/>
<param name='disable-rtp-auto-adjust' value='false'/>
<param name='rtp-autofix-timing' value='false'/>


Best regards,

kokoska.rokoska


Brian West napsal(a):
> Ok update in a few I now recall why we had that && ! 
> sofia_test_pflag(tech_pvt->profile, PFLAG_AUTO_NAT) in there.
> 
> /b
> 
> On Aug 16, 2009, at 2:40 PM, kokoska rokoska wrote:
> 
>> Thank you very much, Brian, for your help!
>>
>> Now are all IPs correct :-) (BTW: In my previous post I mean "c"  
>> line in
>> SDP, not "m" line). Thanks once more!
>>
>> Well, signaling works fine, but I still have troubles with RTPs:
>> I can see with ngrep RTPs going to FreeSWITCH from both legs (a, b)  
>> but
>> there are not outgoing RTPs from FreeSWITCH to any of the call legs.
>> And, of course, caller and callee hear nothing :-)
>>
>> Could you, please, help me to solve this? Thanks.
>>
>> Best regards,
>>
>> kokoska.rokoska
>>
>>
>>
>>
>> Brian West napsal(a):
>>> You have to set the local-network-acl on the profile so it knows when
>>> or not to fix up the VIA
>>> /b
>>>
>>> On Aug 16, 2009, at 11:41 AM, kokoska rokoska wrote:
>>>
>>>> Hi all,
>>>>
>>>> I have just upgarded my (a little bit old :-) FreeSWITCH to current
>>>> trunk and now i have troubles with IP addresses in SIP & SDP, while
>>>> before upgrade everything work fine...
>>>>
>>>> My FreeSWITCH is behind NAT and all relevant sip profiles have set:
>>>>
>>>> <param name="ext-rtp-ip" value="1.2.3.4"/>
>>>> <param name="ext-sip-ip" value="1.2.3.4"/>
>>>>
>>>> But when I send INVITE thru the profile to the gateway associated  
>>>> with
>>>> it i see local IP in "Via" header and in SDP "m" line too.
>>>> BTW: The "Contact" header is populated with "external" IP (1.2.3.4)
>>>
>>> _______________________________________________
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
> 
> 
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
> 





More information about the FreeSWITCH-users mailing list