Hi Mark, I'm curious to see if you'd had any luck with DAHDI built-in echo cancellers such as MG2? (I figured since MG2 has been built into DAHDI for a while it would be slightly more likely to work than OSLEC. In my case neither MG2 nor OSLEC works.) In order to determine whether echo cancellation is in use with DAHDI you can check the output of lsdahdi: [root@elastix ~]# lsdahdi ### Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: FXS" (MASTER) 1 FXS FXOKS (In use) (SWEC: OSLEC) (EC: OSLEC) 2 FXS FXOKS (In use) (SWEC: OSLEC) This shows FXS port 1 in off-hook with OSLEC in-use. FXS port 2 has OSLEC configured but is on-hook. If I were to run FreeSwitch the channel would be silent in this configuration. HTH, -Slim -- Jeroen C. "Slim" van Gelderen Olympic Sports Data Services Email: jeroeng@thegreek.com Phone: +1 876 953 6182 x128 -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Mark Maly Sent: Monday, June 28, 2010 13:45 To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] FreeTDM and DAHDI+OSLEC/MG2 anyone? I'm attempting to use Freeswitch/DAHDHI and OSLEC, as well. I agree in commenting out the "echocancellation" line in zt.conf. The channels seem to work OK but the echo cancellation does not seem to work (I can see the kernel drivers for it, but I still have a great deal of echo). Mark -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Jeroen C. van Gelderen Sent: Saturday, June 26, 2010 7:57 PM To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] FreeTDM and DAHDI+OSLEC/MG2 anyone? Hi everybody, I have a feeling I must be missing the obvious... I've been trying to get echo canceling to work with Freeswitch/FreeTDM/DAHDI but I have been failing miserably for days. When I enable echo cancellation (MG2 or OSLEC) on a DAHDI/FreeTDM channel (FXS or FXO) that channel goes silent. In absence of better suggestions I was hoping to replicate someone's "known working" configuration. Is anyone successfully running the following combination: - any x86 hardware - any recent flavor Linux - any recent version of DAHDI using FXO ports - FreeSwitch/FreeTDM trunk from git - OSLEC echo canceller (or MG2) - (BONUS:) Xorcom Astribank with FXO/FXS ports. I addition to much Googling I've tried most permutations of: - CentOS 5.4, 5.5, Ubuntu 10.04 LTS, Elastix - x86 and x64 single and multicore CPUs. - Non-PAE kernels for 32-bit installs. - DADHI from SVN (or -in case of Elastix- the built-in 2.2.0.2) - MG2 and OSLEC echo cancellers - Freeswitch from Git trunk In each case everything configures fine to the point that Asterisk 1.6 will function with echo cancellation enabled. So we know that DAHDI layer works. But Freeswitch channels go silent when echo cancellation is enabled. Puzzled, -Slim -- Jeroen C. "Slim" van Gelderen _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org