New subject: IP SIP Trunk errors/issues

29 Jun 2010

      I have tried the options below with no luck.

David  will tcpdump output suffice ?

please advise

thanks

S
Re: [Freeswitch-users] IP SIP Trunk errors/issues
        	Monday, June 28, 2010 8:12 AM

            From: 
            "Zuhair Raza" <engineerzuhairraza@gmail.com>

        	To: 
        	freeswitch-users@lists.freeswitch.orghi
try this one 

 <condition field="network_addr" expression="^x\.x\.x\.x$">
     <anti-action application="reject" data="407"/>

On Mon, Jun 28, 2010 at 4:16 PM, Syed Hussain <uzairsh@yahoo.com> wrote:

Hi ,

I have subscribed to sonovoip a sip trunk provider who uses IP based authentication for SIP services ,

I am trying to make outbound international calls which are being
rejected by the provider for some reason, I am not able to figure out
if there is something wrong with the configuration.

I am listing out my configuration. Any help  would be greatly appreciated .

I have also tried #wiki.freeswitch.org/wiki/Provider_Configuration:_SonoVoIP configuration from freeswitch wiki gives errors .

The voip configuration works perfectly with asterisk 1.6

My configuration is follows

Under

/usr/local/freeswitch/conf/sip_profiles/external

cat sonovoip.xml

<include>

  <gateway name="sonovoip">

    <param name="username" value="anything"/>

    <param name="password" value="anything"/>

    <param name="realm" value="x.x.x.x"/> <!--sonovoip ip -->

    <param name="register" value="false"/>

    <param name="caller-id-in-from" value="true"/>

        <param name="extension-in-contact" value="true"/>

  </gateway>

</include>

My dialplan , under /usr/local/freeswitch/conf/dialplan/public.xml

<extension name="sonovoip" continue="true">

      <condition field="destination_number" expression="^(00.*)$">

         <action application="bridge" data="sofia/gateway/sonovoip/$1"/>

      </condition>

    </extension>

I did change the vars.xml  ports

  <!-- Internal SIP Profile -->

  <X-PRE-PROCESS cmd="set" data="internal_auth_calls=true"/>

  <X-PRE-PROCESS cmd="set" data="internal_sip_port=5080"/>

  <X-PRE-PROCESS cmd="set" data="internal_tls_port=5081"/>

  <X-PRE-PROCESS cmd="set" data="internal_ssl_enable=false"/>

  <X-PRE-PROCESS cmd="set" data="internal_ssl_dir=$${base_dir}/conf/ssl"/>

  <!-- External SIP Profile -->

  <X-PRE-PROCESS cmd="set" data="external_auth_calls=false"/>

  <X-PRE-PROCESS cmd="set" data="external_sip_port=5060"/>

  <X-PRE-PROCESS cmd="set" data="external_tls_port=5061"/>

  <X-PRE-PROCESS cmd="set" data="external_ssl_enable=false"/>

  <X-PRE-PROCESS cmd="set" data="external_ssl_dir=$${base_dir}/conf/ssl"/>

The debug

#pastebin.com/4MFhSWm9

Please advise if any other information is required.

Thanks

S

_______________________________________________

FreeSWITCH-users mailing list

FreeSWITCH-users@lists.freeswitch.org

http://lists.freeswitch.org/mailman/listinfo/freeswitch-users

UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users

http://www.freeswitch.org

-- 
Regards,
Zuhair Raza

Re: [Freeswitch-users] IP SIP Trunk errors/issues

Syed Hussain

David Ponzone

tags

participants (2)