Freeswitch and virtual FAX
Hi guys, I hope someone can help me on the issue that I am facing. I am planing to implement a virtual FAX machine with freeswitch. My main concern is, will it be possible to do that without any type of card, analog, digital, ATA gateway or IAXmodem, but using the t38 support? Best regards, Dragan
assuming you have a provider that supports t.38, sure.
On Nov 24, 2014, at 10:46 AM, Dragan Saraginov <dsaraginov@gmail.com> wrote:
Hi guys,
I hope someone can help me on the issue that I am facing. I am planing to implement a virtual FAX machine with freeswitch. My main concern is, will it be possible to do that without any type of card, analog, digital, ATA gateway or IAXmodem, but using the t38 support?
We have a PRI on a Cisco VVX that converts it to SIP and sends to FS and spandsp receives the fax. We enabled T38 on the VVX by default but it doesn't always work, for some numbers have use straight g711 ulaw which seems to work too. On Mon, Nov 24, 2014 at 10:55 AM, Michael Jerris <mike@jerris.com> wrote:
assuming you have a provider that supports t.38, sure.
On Nov 24, 2014, at 10:46 AM, Dragan Saraginov <dsaraginov@gmail.com> wrote:
Hi guys,
I hope someone can help me on the issue that I am facing. I am planing to implement a virtual FAX machine with freeswitch. My main concern is, will it be possible to do that without any type of card, analog, digital, ATA gateway or IAXmodem, but using the t38 support?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hello Michael, my scenario is for outbound fax and is the following Hylafax > Freeswitch > Telcom . I looked on the internet but I can not find any solution without BRI or Analog cards. Can you please share if you know how can I do this? I am stuck on freetdm, but seems this module works only if I have some BRI or Analog card in the system. On Mon, Nov 24, 2014 at 4:55 PM, Michael Jerris <mike@jerris.com> wrote:
assuming you have a provider that supports t.38, sure.
On Nov 24, 2014, at 10:46 AM, Dragan Saraginov <dsaraginov@gmail.com> wrote:
Hi guys,
I hope someone can help me on the issue that I am facing. I am planing to implement a virtual FAX machine with freeswitch. My main concern is, will it be possible to do that without any type of card, analog, digital, ATA gateway or IAXmodem, but using the t38 support?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
How are you trying to connect to your telecom provider? If it is by VoIP, then why are you using freetdm? If its by a PSTN connection you will need freetdm and some type of voice card (ISDN, E1, T1 or analogue) to connect. Do you need to use HylaFAX or is that just one of your options? - You can send and receive FAXes directly by audio or T.38 using FreeSWITCH itself. - You can have HylaFAX use FreeSwitch as its modem bank for FAX, but right now that only works for audio FAX. - If you just want the qeuing scheme that HylaFAX gives you, then there is a package called gofaxip which will let you run a HyfaFAX server, but uses FreeSwitch to actually send and receive the FAXes. Regards, Steve On 11/27/2014 05:16 AM, Dragan Saraginov wrote:
Hello Michael,
my scenario is for outbound fax and is the following Hylafax > Freeswitch > Telcom . I looked on the internet but I can not find any solution without BRI or Analog cards. Can you please share if you know how can I do this? I am stuck on freetdm, but seems this module works only if I have some BRI or Analog card in the system.
On Mon, Nov 24, 2014 at 4:55 PM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
assuming you have a provider that supports t.38, sure.
> On Nov 24, 2014, at 10:46 AM, Dragan Saraginov <dsaraginov@gmail.com <mailto:dsaraginov@gmail.com>> wrote: > > Hi guys, > > I hope someone can help me on the issue that I am facing. I am planing to implement a virtual FAX machine with freeswitch. My main concern is, will it be possible to do that without any type of card, analog, digital, ATA gateway or IAXmodem, but using the t38 support?
Thanks Steve for the email and your effort to resolve my issue. To clarify things, I want to use HylaFAX with FreeSWITCH. The telco provider is VoIP (SIP) The thing is I can not figure out the outgoing dialplan for this transfer_fax extension. Can you please share if you have any experience with this. Best regards, Dragan On Thu, Nov 27, 2014 at 3:56 PM, Steve Underwood <steveu@coppice.org> wrote:
How are you trying to connect to your telecom provider? If it is by VoIP, then why are you using freetdm? If its by a PSTN connection you will need freetdm and some type of voice card (ISDN, E1, T1 or analogue) to connect. Do you need to use HylaFAX or is that just one of your options?
- You can send and receive FAXes directly by audio or T.38 using FreeSWITCH itself. - You can have HylaFAX use FreeSwitch as its modem bank for FAX, but right now that only works for audio FAX. - If you just want the qeuing scheme that HylaFAX gives you, then there is a package called gofaxip which will let you run a HyfaFAX server, but uses FreeSwitch to actually send and receive the FAXes.
Regards, Steve
On 11/27/2014 05:16 AM, Dragan Saraginov wrote:
Hello Michael,
my scenario is for outbound fax and is the following Hylafax > Freeswitch > Telcom . I looked on the internet but I can not find any solution without BRI or Analog cards. Can you please share if you know how can I do this? I am stuck on freetdm, but seems this module works only if I have some BRI or Analog card in the system.
On Mon, Nov 24, 2014 at 4:55 PM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
assuming you have a provider that supports t.38, sure.
> On Nov 24, 2014, at 10:46 AM, Dragan Saraginov <dsaraginov@gmail.com <mailto:dsaraginov@gmail.com>> wrote: > > Hi guys, > > I hope someone can help me on the issue that I am facing. I am planing to implement a virtual FAX machine with freeswitch. My main concern is, will it be possible to do that without any type of card, analog, digital, ATA gateway or IAXmodem, but using the t38 support?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (4)
-
Dragan Saraginov
-
Michael Jerris
-
Steve Underwood
-
Vik Killa