I am a freeswitch noob, so please forgive me if my questions are not coherent with proper concepts. I have made an earnest attempt to find clues to my problem on the wiki and elsewhere, but suspect I am asking the wrong questions. Problem: I cannot get a Cisco spa 112 to register properly. Context: I am trying to put together a proof of concept multi-tenant freeswitch server. After reading the book FreeSWITCH 1.2 by Anthony Minessale, I used the FusionPBX install script to get freeswitch 1.4.14 built on a fresh Ubuntu 12.04 install. I configured a domain name to point to the new server. On the server I added the domain in the directory and 3 users/extensions along with several sip gateways. The gateways work. One of the extensions has a Grandstream GXP2160 registered successfully, another has a Zoiper soft phone registered successfully. Details: I have tried to configure and get a Cisco SPA 112 to register on the 3rd extension. However, it is failing to register. I have watched the sip trace and packet capture. Both show the same thing: the Cisco SPA sends a sip register request to which sofia responds with a 401 "unauthorized". Then, instead of sending a sip register with an authorization digest as the other phones do, the Cisco spa 112, sends another generic sip register request, which elicits another 401 "unauthorized" from sofia. This repeats a few times, and then the spa 112 gives up, waits 40 seconds and then does it all over again. I have had this device registered with an asterisk server without trouble. I have reset the device to factory defaults and updated the firmware, all without any change. The domain name is fairly long. Don't know if that might be a factor. Any clues where I might look next or tests I might try for more information? Thank you, Robert Oldham Oldham Technology Phone: (801) 877-2190 Email: robert@oldhamtechnology.com Website: https://www.oldhamtechnology.com
Are you registering to the FQDN of the domain? Is there any NAT involved? PBX behind NAT? phones behind NAT? Thanks, Moishe Grunstein Tornado Computer Systems, Inc. 212.400.7650 888.IPPBX.US Service Request Email: support@nysolutions.com<mailto:support@nysolutions.com> Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified [cid:image001.jpg@01C72F94.9EE45D60]<http://www.nysolutions.com/> Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Robert Oldham Sent: Thursday, January 1, 2015 7:49 PM To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] multi-tenant registration for Cisco spa 112 I am a freeswitch noob, so please forgive me if my questions are not coherent with proper concepts. I have made an earnest attempt to find clues to my problem on the wiki and elsewhere, but suspect I am asking the wrong questions. Problem: I cannot get a Cisco spa 112 to register properly. Context: I am trying to put together a proof of concept multi-tenant freeswitch server. After reading the book FreeSWITCH 1.2 by Anthony Minessale, I used the FusionPBX install script to get freeswitch 1.4.14 built on a fresh Ubuntu 12.04 install. I configured a domain name to point to the new server. On the server I added the domain in the directory and 3 users/extensions along with several sip gateways. The gateways work. One of the extensions has a Grandstream GXP2160 registered successfully, another has a Zoiper soft phone registered successfully. Details: I have tried to configure and get a Cisco SPA 112 to register on the 3rd extension. However, it is failing to register. I have watched the sip trace and packet capture. Both show the same thing: the Cisco SPA sends a sip register request to which sofia responds with a 401 "unauthorized". Then, instead of sending a sip register with an authorization digest as the other phones do, the Cisco spa 112, sends another generic sip register request, which elicits another 401 "unauthorized" from sofia. This repeats a few times, and then the spa 112 gives up, waits 40 seconds and then does it all over again. I have had this device registered with an asterisk server without trouble. I have reset the device to factory defaults and updated the firmware, all without any change. The domain name is fairly long. Don't know if that might be a factor. Any clues where I might look next or tests I might try for more information? Thank you, Robert Oldham Oldham Technology Phone: (801) 877-2190 Email: robert@oldhamtechnology.com<mailto:robert@oldhamtechnology.com> Website: https://www.oldhamtechnology.com
I am registering to the FQDN of the domain. There is a NAT involved. The PBX is not behind NAT. The phones are behind NAT on separate network. Thank you, Robert Oldham Oldham Technology Phone: (801) 877-2190 Email: robert@oldhamtechnology.com Website: https://www.oldhamtechnology.com On January 1, 2015 7:41:45 PM MST, Moishe Grunstein <max@nysolutions.com> wrote:
Are you registering to the FQDN of the domain? Is there any NAT involved? PBX behind NAT? phones behind NAT?
Thanks,
Moishe Grunstein Tornado Computer Systems, Inc. 212.400.7650 888.IPPBX.US Service Request Email: support@nysolutions.com<mailto:support@nysolutions.com> Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified [cid:image001.jpg@01C72F94.9EE45D60]<http://www.nysolutions.com/> Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Robert Oldham Sent: Thursday, January 1, 2015 7:49 PM To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] multi-tenant registration for Cisco spa 112
I am a freeswitch noob, so please forgive me if my questions are not coherent with proper concepts. I have made an earnest attempt to find clues to my problem on the wiki and elsewhere, but suspect I am asking the wrong questions.
Problem: I cannot get a Cisco spa 112 to register properly.
Context: I am trying to put together a proof of concept multi-tenant freeswitch server. After reading the book FreeSWITCH 1.2 by Anthony Minessale, I used the FusionPBX install script to get freeswitch 1.4.14 built on a fresh Ubuntu 12.04 install. I configured a domain name to point to the new server. On the server I added the domain in the directory and 3 users/extensions along with several sip gateways. The gateways work. One of the extensions has a Grandstream GXP2160 registered successfully, another has a Zoiper soft phone registered successfully.
Details: I have tried to configure and get a Cisco SPA 112 to register on the 3rd extension. However, it is failing to register. I have watched the sip trace and packet capture. Both show the same thing: the Cisco SPA sends a sip register request to which sofia responds with a 401 "unauthorized". Then, instead of sending a sip register with an authorization digest as the other phones do, the Cisco spa 112, sends another generic sip register request, which elicits another 401 "unauthorized" from sofia. This repeats a few times, and then the spa 112 gives up, waits 40 seconds and then does it all over again.
I have had this device registered with an asterisk server without trouble. I have reset the device to factory defaults and updated the firmware, all without any change.
The domain name is fairly long. Don't know if that might be a factor.
Any clues where I might look next or tests I might try for more information?
Thank you,
Robert Oldham Oldham Technology Phone: (801) 877-2190 Email: robert@oldhamtechnology.com<mailto:robert@oldhamtechnology.com> Website: https://www.oldhamtechnology.com
------------------------------------------------------------------------
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hello, What do you see in the logs? That might be relevant to understand what it tries to do. Florent Le 2 janv. 2015 08:15, "Robert Oldham" <robert@oldhamtechnology.com> a écrit :
I am registering to the FQDN of the domain.
There is a NAT involved. The PBX is not behind NAT. The phones are behind NAT on separate network.
Thank you,
Robert Oldham Oldham Technology Phone: (801) 877-2190 Email: robert@oldhamtechnology.com Website: https://www.oldhamtechnology.com
On January 1, 2015 7:41:45 PM MST, Moishe Grunstein <max@nysolutions.com> wrote:
Are you registering to the FQDN of the domain?
Is there any NAT involved? PBX behind NAT? phones behind NAT?
Thanks,
Moishe Grunstein
Tornado Computer Systems, Inc.
212.400.7650 888.IPPBX.US *Service Request Email: support@nysolutions.com <support@nysolutions.com> *
Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified
[image: cid:image001.jpg@01C72F94.9EE45D60] <http://www.nysolutions.com/>
Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Robert Oldham *Sent:* Thursday, January 1, 2015 7:49 PM *To:* freeswitch-users@lists.freeswitch.org *Subject:* [Freeswitch-users] multi-tenant registration for Cisco spa 112
I am a freeswitch noob, so please forgive me if my questions are not coherent with proper concepts. I have made an earnest attempt to find clues to my problem on the wiki and elsewhere, but suspect I am asking the wrong questions.
Problem: I cannot get a Cisco spa 112 to register properly.
Context: I am trying to put together a proof of concept multi-tenant freeswitch server. After reading the book FreeSWITCH 1.2 by Anthony Minessale, I used the FusionPBX install script to get freeswitch 1.4.14 built on a fresh Ubuntu 12.04 install. I configured a domain name to point to the new server. On the server I added the domain in the directory and 3 users/extensions along with several sip gateways. The gateways work. One of the extensions has a Grandstream GXP2160 registered successfully, another has a Zoiper soft phone registered successfully.
Details: I have tried to configure and get a Cisco SPA 112 to register on the 3rd extension. However, it is failing to register. I have watched the sip trace and packet capture. Both show the same thing: the Cisco SPA sends a sip register request to which sofia responds with a 401 "unauthorized". Then, instead of sending a sip register with an authorization digest as the other phones do, the Cisco spa 112, sends another generic sip register request, which elicits another 401 "unauthorized" from sofia. This repeats a few times, and then the spa 112 gives up, waits 40 seconds and then does it all over again.
I have had this device registered with an asterisk server without trouble. I have reset the device to factory defaults and updated the firmware, all without any change.
The domain name is fairly long. Don't know if that might be a factor.
Any clues where I might look next or tests I might try for more information?
Thank you,
Robert Oldham Oldham Technology Phone: (801) 877-2190 Email: robert@oldhamtechnology.com Website: https://www.oldhamtechnology.com
------------------------------
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Florent, I am not sure I understand which logs you mean. Logs from the Cisco spa 112, FreeSWITCH, the firewall, or all of the above? Thanks, Robert Oldham ------------------------------------------------------------------------ Oldham Technology W: 801-877-2190 x801 E: robert@oldhamtechnology.com http://www.oldhamtechnology.com On 01/02/2015 12:45 AM, Florent Krieg wrote:
Hello,
What do you see in the logs? That might be relevant to understand what it tries to do.
Florent
Le 2 janv. 2015 08:15, "Robert Oldham" <robert@oldhamtechnology.com <mailto:robert@oldhamtechnology.com>> a écrit :
I am registering to the FQDN of the domain.
There is a NAT involved. The PBX is not behind NAT. The phones are behind NAT on separate network.
Thank you,
Robert Oldham Oldham Technology Phone: (801) 877-2190 <tel:%28801%29%20877-2190> Email: robert@oldhamtechnology.com <mailto:robert@oldhamtechnology.com> Website: https://www.oldhamtechnology.com
On January 1, 2015 7:41:45 PM MST, Moishe Grunstein <max@nysolutions.com <mailto:max@nysolutions.com>> wrote:
Are you registering to the FQDN of the domain?
Is there any NAT involved? PBX behind NAT? phones behind NAT?
Thanks,
Moishe Grunstein
Tornado Computer Systems, Inc.
212.400.7650 <tel:212.400.7650> 888.IPPBX.US <http://888.IPPBX.US> *Service Request Email: support@nysolutions.com <mailto:support@nysolutions.com> *
Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified
cid:image001.jpg@01C72F94.9EE45D60 <http://www.nysolutions.com/>
Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS
*From:*freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org>] *On Behalf Of *Robert Oldham *Sent:* Thursday, January 1, 2015 7:49 PM *To:* freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org> *Subject:* [Freeswitch-users] multi-tenant registration for Cisco spa 112
I am a freeswitch noob, so please forgive me if my questions are not coherent with proper concepts. I have made an earnest attempt to find clues to my problem on the wiki and elsewhere, but suspect I am asking the wrong questions.
Problem: I cannot get a Cisco spa 112 to register properly.
Context: I am trying to put together a proof of concept multi-tenant freeswitch server. After reading the book FreeSWITCH 1.2 by Anthony Minessale, I used the FusionPBX install script to get freeswitch 1.4.14 built on a fresh Ubuntu 12.04 install. I configured a domain name to point to the new server. On the server I added the domain in the directory and 3 users/extensions along with several sip gateways. The gateways work. One of the extensions has a Grandstream GXP2160 registered successfully, another has a Zoiper soft phone registered successfully.
Details: I have tried to configure and get a Cisco SPA 112 to register on the 3rd extension. However, it is failing to register. I have watched the sip trace and packet capture. Both show the same thing: the Cisco SPA sends a sip register request to which sofia responds with a 401 "unauthorized". Then, instead of sending a sip register with an authorization digest as the other phones do, the Cisco spa 112, sends another generic sip register request, which elicits another 401 "unauthorized" from sofia. This repeats a few times, and then the spa 112 gives up, waits 40 seconds and then does it all over again.
I have had this device registered with an asterisk server without trouble. I have reset the device to factory defaults and updated the firmware, all without any change.
The domain name is fairly long. Don't know if that might be a factor.
Any clues where I might look next or tests I might try for more information?
Thank you,
Robert Oldham Oldham Technology Phone: (801) 877-2190 <tel:%28801%29%20877-2190> Email: robert@oldhamtechnology.com <mailto:robert@oldhamtechnology.com> Website: https://www.oldhamtechnology.com
------------------------------------------------------------------------
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I have Cisco SPA5XX setup in multi-tenant mode. I used the proxy params to accomplish it, that way I did not need a FQDN to resolve. Here is an example from my prov files (192.168.0.100 is IP of FS and '3.local' is made up domain for a tenant) <Extension_1_ group="Phone/Line_Key_1">1</Extension_1_> <Short_Name_1_ group="Phone/Line_Key_1">E. 1000</Short_Name_1_> <Share_Call_Appearance_1_ group="Phone/Line_Key_1">private</Share_Call_Appearance_1_> <Share_Ext_1_ group="Ext_1/Share_Line_Appearance">private</Share_Ext_1_> <Proxy_1_ group="Ext_1/Proxy_and_Registration">3.local</Proxy_1_> <Outbound_Proxy_1_ group="Ext_1/Proxy_and_Registration">192.168.0.100</Outbound_Proxy_1_> <Use_Outbound_Proxy_1_ group="Ext_1/Proxy_and_Registration">Yes</Use_Outbound_Proxy_1_> <Use_OB_Proxy_In_Dialog_1_ group="Ext_1/Proxy_and_Registration">Yes</Use_OB_Proxy_In_Dialog_1_> <User_ID_1_ group="Ext_1/Subscriber_Information">1000</User_ID_1_> <Password_1_ group="Ext_1/Subscriber_Information">**********</Password_1_> <Use_Anonymous_With_RPID_1_ group="Ext_1/SIP_Settings">No</Use_Anonymous_With_RPID_1_> <Dial_Plan_1_ group="Ext_1/Dial_Plan">[x*].</Dial_Plan_1_> <Voice_Mail_Server_1_ ua="na">1000@3.local</Voice_Mail_Server_1_> <Register_Expires_1_ group="Ext_1/Proxy_and_Registration">300</Register_Expires_1_> <Subscription_Expires_1_ group="Ext_1/Share_Line_Appearance">300</Subscription_Expires_1_> <Voice_Mail_Subscribe_Interval_1_ group="Ext_1/Call_Feature_Settings">300</Voice_Mail_Subscribe_Interval_1_> On Fri, Jan 2, 2015 at 11:40 AM, Robert Oldham <robert@oldhamtechnology.com> wrote:
Florent,
I am not sure I understand which logs you mean. Logs from the Cisco spa 112, FreeSWITCH, the firewall, or all of the above?
Thanks, Robert Oldham ------------------------------ Oldham Technology W: 801-877-2190 x801 E: robert@oldhamtechnology.com http://www.oldhamtechnology.com
On 01/02/2015 12:45 AM, Florent Krieg wrote:
Hello,
What do you see in the logs? That might be relevant to understand what it tries to do.
Florent Le 2 janv. 2015 08:15, "Robert Oldham" <robert@oldhamtechnology.com> a écrit :
I am registering to the FQDN of the domain.
There is a NAT involved. The PBX is not behind NAT. The phones are behind NAT on separate network.
Thank you,
Robert Oldham Oldham Technology Phone: (801) 877-2190 Email: robert@oldhamtechnology.com Website: https://www.oldhamtechnology.com
On January 1, 2015 7:41:45 PM MST, Moishe Grunstein <max@nysolutions.com> wrote:
Are you registering to the FQDN of the domain?
Is there any NAT involved? PBX behind NAT? phones behind NAT?
Thanks,
Moishe Grunstein
Tornado Computer Systems, Inc.
212.400.7650 888.IPPBX.US *Service Request Email: support@nysolutions.com <support@nysolutions.com> *
Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified
[image: cid:image001.jpg@01C72F94.9EE45D60] <http://www.nysolutions.com/>
Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Robert Oldham *Sent:* Thursday, January 1, 2015 7:49 PM *To:* freeswitch-users@lists.freeswitch.org *Subject:* [Freeswitch-users] multi-tenant registration for Cisco spa 112
I am a freeswitch noob, so please forgive me if my questions are not coherent with proper concepts. I have made an earnest attempt to find clues to my problem on the wiki and elsewhere, but suspect I am asking the wrong questions.
Problem: I cannot get a Cisco spa 112 to register properly.
Context: I am trying to put together a proof of concept multi-tenant freeswitch server. After reading the book FreeSWITCH 1.2 by Anthony Minessale, I used the FusionPBX install script to get freeswitch 1.4.14 built on a fresh Ubuntu 12.04 install. I configured a domain name to point to the new server. On the server I added the domain in the directory and 3 users/extensions along with several sip gateways. The gateways work. One of the extensions has a Grandstream GXP2160 registered successfully, another has a Zoiper soft phone registered successfully.
Details: I have tried to configure and get a Cisco SPA 112 to register on the 3rd extension. However, it is failing to register. I have watched the sip trace and packet capture. Both show the same thing: the Cisco SPA sends a sip register request to which sofia responds with a 401 "unauthorized". Then, instead of sending a sip register with an authorization digest as the other phones do, the Cisco spa 112, sends another generic sip register request, which elicits another 401 "unauthorized" from sofia. This repeats a few times, and then the spa 112 gives up, waits 40 seconds and then does it all over again.
I have had this device registered with an asterisk server without trouble. I have reset the device to factory defaults and updated the firmware, all without any change.
The domain name is fairly long. Don't know if that might be a factor.
Any clues where I might look next or tests I might try for more information?
Thank you,
Robert Oldham Oldham Technology Phone: (801) 877-2190 <%28801%29%20877-2190> Email: robert@oldhamtechnology.com Website: https://www.oldhamtechnology.com
------------------------------
Professional FreeSWITCH Consulting Services: consulting@freeswitch.orghttp://www.freeswitchsolutions.com
Official FreeSWITCH Siteshttp://www.freeswitch.orghttp://confluence.freeswitch.orghttp://www.cluecon....
FreeSWITCH-users mailing listFreeSWITCH-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.orghttp://www.freeswitchsolutions.com
Official FreeSWITCH Siteshttp://www.freeswitch.orghttp://confluence.freeswitch.orghttp://www.cluecon....
FreeSWITCH-users mailing listFreeSWITCH-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thank you Vik. I'll try that too. Robert Oldham ------------------------------------------------------------------------ Oldham Technology W: 801-877-2190 x801 E: robert@oldhamtechnology.com http://www.oldhamtechnology.com On 01/02/2015 10:01 AM, Vik Killa wrote:
I have Cisco SPA5XX setup in multi-tenant mode. I used the proxy params to accomplish it, that way I did not need a FQDN to resolve. Here is an example from my prov files (192.168.0.100 is IP of FS and '3.local' is made up domain for a tenant)
<Extension_1_ group="Phone/Line_Key_1">1</Extension_1_> <Short_Name_1_ group="Phone/Line_Key_1">E. 1000</Short_Name_1_> <Share_Call_Appearance_1_ group="Phone/Line_Key_1">private</Share_Call_Appearance_1_> <Share_Ext_1_ group="Ext_1/Share_Line_Appearance">private</Share_Ext_1_> <Proxy_1_ group="Ext_1/Proxy_and_Registration">3.local</Proxy_1_> <Outbound_Proxy_1_ group="Ext_1/Proxy_and_Registration">192.168.0.100</Outbound_Proxy_1_> <Use_Outbound_Proxy_1_ group="Ext_1/Proxy_and_Registration">Yes</Use_Outbound_Proxy_1_> <Use_OB_Proxy_In_Dialog_1_ group="Ext_1/Proxy_and_Registration">Yes</Use_OB_Proxy_In_Dialog_1_> <User_ID_1_ group="Ext_1/Subscriber_Information">1000</User_ID_1_> <Password_1_ group="Ext_1/Subscriber_Information">**********</Password_1_> <Use_Anonymous_With_RPID_1_ group="Ext_1/SIP_Settings">No</Use_Anonymous_With_RPID_1_> <Dial_Plan_1_ group="Ext_1/Dial_Plan">[x*].</Dial_Plan_1_> <Voice_Mail_Server_1_ ua="na">1000@3.local</Voice_Mail_Server_1_> <Register_Expires_1_ group="Ext_1/Proxy_and_Registration">300</Register_Expires_1_> <Subscription_Expires_1_ group="Ext_1/Share_Line_Appearance">300</Subscription_Expires_1_> <Voice_Mail_Subscribe_Interval_1_ group="Ext_1/Call_Feature_Settings">300</Voice_Mail_Subscribe_Interval_1_>
On Fri, Jan 2, 2015 at 11:40 AM, Robert Oldham <robert@oldhamtechnology.com <mailto:robert@oldhamtechnology.com>> wrote:
Florent,
I am not sure I understand which logs you mean. Logs from the Cisco spa 112, FreeSWITCH, the firewall, or all of the above?
Thanks, Robert Oldham ------------------------------------------------------------------------ Oldham Technology W: 801-877-2190 x801 <tel:801-877-2190%20x801> E: robert@oldhamtechnology.com <mailto:robert@oldhamtechnology.com> http://www.oldhamtechnology.com
On 01/02/2015 12:45 AM, Florent Krieg wrote:
Hello,
What do you see in the logs? That might be relevant to understand what it tries to do.
Florent
Le 2 janv. 2015 08:15, "Robert Oldham" <robert@oldhamtechnology.com <mailto:robert@oldhamtechnology.com>> a écrit :
I am registering to the FQDN of the domain.
There is a NAT involved. The PBX is not behind NAT. The phones are behind NAT on separate network.
Thank you,
Robert Oldham Oldham Technology Phone: (801) 877-2190 <tel:%28801%29%20877-2190> Email: robert@oldhamtechnology.com <mailto:robert@oldhamtechnology.com> Website: https://www.oldhamtechnology.com
On January 1, 2015 7:41:45 PM MST, Moishe Grunstein <max@nysolutions.com <mailto:max@nysolutions.com>> wrote:
Are you registering to the FQDN of the domain?
Is there any NAT involved? PBX behind NAT? phones behind NAT?
Thanks,
Moishe Grunstein
Tornado Computer Systems, Inc.
212.400.7650 <tel:212.400.7650> 888.IPPBX.US <http://888.IPPBX.US> *Service Request Email: support@nysolutions.com <mailto:support@nysolutions.com> *
Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified
cid:image001.jpg@01C72F94.9EE45D60 <http://www.nysolutions.com/>
Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS
*From:*freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org>] *On Behalf Of *Robert Oldham *Sent:* Thursday, January 1, 2015 7:49 PM *To:* freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org> *Subject:* [Freeswitch-users] multi-tenant registration for Cisco spa 112
I am a freeswitch noob, so please forgive me if my questions are not coherent with proper concepts. I have made an earnest attempt to find clues to my problem on the wiki and elsewhere, but suspect I am asking the wrong questions.
Problem: I cannot get a Cisco spa 112 to register properly.
Context: I am trying to put together a proof of concept multi-tenant freeswitch server. After reading the book FreeSWITCH 1.2 by Anthony Minessale, I used the FusionPBX install script to get freeswitch 1.4.14 built on a fresh Ubuntu 12.04 install. I configured a domain name to point to the new server. On the server I added the domain in the directory and 3 users/extensions along with several sip gateways. The gateways work. One of the extensions has a Grandstream GXP2160 registered successfully, another has a Zoiper soft phone registered successfully.
Details: I have tried to configure and get a Cisco SPA 112 to register on the 3rd extension. However, it is failing to register. I have watched the sip trace and packet capture. Both show the same thing: the Cisco SPA sends a sip register request to which sofia responds with a 401 "unauthorized". Then, instead of sending a sip register with an authorization digest as the other phones do, the Cisco spa 112, sends another generic sip register request, which elicits another 401 "unauthorized" from sofia. This repeats a few times, and then the spa 112 gives up, waits 40 seconds and then does it all over again.
I have had this device registered with an asterisk server without trouble. I have reset the device to factory defaults and updated the firmware, all without any change.
The domain name is fairly long. Don't know if that might be a factor.
Any clues where I might look next or tests I might try for more information?
Thank you,
Robert Oldham Oldham Technology Phone: (801) 877-2190 <tel:%28801%29%20877-2190> Email: robert@oldhamtechnology.com <mailto:robert@oldhamtechnology.com> Website: https://www.oldhamtechnology.com
------------------------------------------------------------------------
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
If it is a NAT issue, you may want to try NDLB-force-rport=true/safe Luis Daniel Lucio Quiroz CISSP, CISM, CISA Linux, VoIP and much more fun www.okay.com.mx Need LCR? Check out LCR for FusionPBX with FreeSWITCH Need Billing? Check out Billing for FusionPBX with FreeSWITCH 2015-01-02 13:31 GMT-05:00 Robert Oldham <robert@oldhamtechnology.com>:
Thank you Vik. I'll try that too.
Robert Oldham ------------------------------ Oldham Technology W: 801-877-2190 x801 E: robert@oldhamtechnology.com http://www.oldhamtechnology.com
On 01/02/2015 10:01 AM, Vik Killa wrote:
I have Cisco SPA5XX setup in multi-tenant mode. I used the proxy params to accomplish it, that way I did not need a FQDN to resolve. Here is an example from my prov files (192.168.0.100 is IP of FS and '3.local' is made up domain for a tenant)
<Extension_1_ group="Phone/Line_Key_1">1</Extension_1_> <Short_Name_1_ group="Phone/Line_Key_1">E. 1000</Short_Name_1_> <Share_Call_Appearance_1_ group="Phone/Line_Key_1">private</Share_Call_Appearance_1_> <Share_Ext_1_ group="Ext_1/Share_Line_Appearance">private</Share_Ext_1_> <Proxy_1_ group="Ext_1/Proxy_and_Registration">3.local</Proxy_1_> <Outbound_Proxy_1_ group="Ext_1/Proxy_and_Registration">192.168.0.100</Outbound_Proxy_1_> <Use_Outbound_Proxy_1_ group="Ext_1/Proxy_and_Registration">Yes</Use_Outbound_Proxy_1_> <Use_OB_Proxy_In_Dialog_1_ group="Ext_1/Proxy_and_Registration">Yes</Use_OB_Proxy_In_Dialog_1_> <User_ID_1_ group="Ext_1/Subscriber_Information">1000</User_ID_1_> <Password_1_ group="Ext_1/Subscriber_Information">**********</Password_1_> <Use_Anonymous_With_RPID_1_ group="Ext_1/SIP_Settings">No</Use_Anonymous_With_RPID_1_> <Dial_Plan_1_ group="Ext_1/Dial_Plan">[x*].</Dial_Plan_1_> <Voice_Mail_Server_1_ ua="na">1000@3.local</Voice_Mail_Server_1_> <Register_Expires_1_ group="Ext_1/Proxy_and_Registration">300</Register_Expires_1_> <Subscription_Expires_1_ group="Ext_1/Share_Line_Appearance">300</Subscription_Expires_1_> <Voice_Mail_Subscribe_Interval_1_ group="Ext_1/Call_Feature_Settings">300</Voice_Mail_Subscribe_Interval_1_>
On Fri, Jan 2, 2015 at 11:40 AM, Robert Oldham < robert@oldhamtechnology.com> wrote:
Florent,
I am not sure I understand which logs you mean. Logs from the Cisco spa 112, FreeSWITCH, the firewall, or all of the above?
Thanks, Robert Oldham ------------------------------ Oldham Technology W: 801-877-2190 x801 <801-877-2190%20x801> E: robert@oldhamtechnology.com http://www.oldhamtechnology.com
On 01/02/2015 12:45 AM, Florent Krieg wrote:
Hello,
What do you see in the logs? That might be relevant to understand what it tries to do.
Florent Le 2 janv. 2015 08:15, "Robert Oldham" <robert@oldhamtechnology.com> a écrit :
I am registering to the FQDN of the domain.
There is a NAT involved. The PBX is not behind NAT. The phones are behind NAT on separate network.
Thank you,
Robert Oldham Oldham Technology Phone: (801) 877-2190 <%28801%29%20877-2190> Email: robert@oldhamtechnology.com Website: https://www.oldhamtechnology.com
On January 1, 2015 7:41:45 PM MST, Moishe Grunstein <max@nysolutions.com> wrote:
Are you registering to the FQDN of the domain?
Is there any NAT involved? PBX behind NAT? phones behind NAT?
Thanks,
Moishe Grunstein
Tornado Computer Systems, Inc.
212.400.7650 888.IPPBX.US *Service Request Email: support@nysolutions.com <support@nysolutions.com> *
Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified
[image: cid:image001.jpg@01C72F94.9EE45D60] <http://www.nysolutions.com/>
Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Robert Oldham *Sent:* Thursday, January 1, 2015 7:49 PM *To:* freeswitch-users@lists.freeswitch.org *Subject:* [Freeswitch-users] multi-tenant registration for Cisco spa 112
I am a freeswitch noob, so please forgive me if my questions are not coherent with proper concepts. I have made an earnest attempt to find clues to my problem on the wiki and elsewhere, but suspect I am asking the wrong questions.
Problem: I cannot get a Cisco spa 112 to register properly.
Context: I am trying to put together a proof of concept multi-tenant freeswitch server. After reading the book FreeSWITCH 1.2 by Anthony Minessale, I used the FusionPBX install script to get freeswitch 1.4.14 built on a fresh Ubuntu 12.04 install. I configured a domain name to point to the new server. On the server I added the domain in the directory and 3 users/extensions along with several sip gateways. The gateways work. One of the extensions has a Grandstream GXP2160 registered successfully, another has a Zoiper soft phone registered successfully.
Details: I have tried to configure and get a Cisco SPA 112 to register on the 3rd extension. However, it is failing to register. I have watched the sip trace and packet capture. Both show the same thing: the Cisco SPA sends a sip register request to which sofia responds with a 401 "unauthorized". Then, instead of sending a sip register with an authorization digest as the other phones do, the Cisco spa 112, sends another generic sip register request, which elicits another 401 "unauthorized" from sofia. This repeats a few times, and then the spa 112 gives up, waits 40 seconds and then does it all over again.
I have had this device registered with an asterisk server without trouble. I have reset the device to factory defaults and updated the firmware, all without any change.
The domain name is fairly long. Don't know if that might be a factor.
Any clues where I might look next or tests I might try for more information?
Thank you,
Robert Oldham Oldham Technology Phone: (801) 877-2190 <%28801%29%20877-2190> Email: robert@oldhamtechnology.com Website: https://www.oldhamtechnology.com
------------------------------
Professional FreeSWITCH Consulting Services: consulting@freeswitch.orghttp://www.freeswitchsolutions.com
Official FreeSWITCH Siteshttp://www.freeswitch.orghttp://confluence.freeswitch.orghttp://www.cluecon....
FreeSWITCH-users mailing listFreeSWITCH-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.orghttp://www.freeswitchsolutions.com
Official FreeSWITCH Siteshttp://www.freeswitch.orghttp://confluence.freeswitch.orghttp://www.cluecon....
FreeSWITCH-users mailing listFreeSWITCH-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.orghttp://www.freeswitchsolutions.com
Official FreeSWITCH Siteshttp://www.freeswitch.orghttp://confluence.freeswitch.orghttp://www.cluecon....
FreeSWITCH-users mailing listFreeSWITCH-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Luis, NDLB-force-rport=true solved my problem. I tried other options, but they did not help. Thank you for your help with this. Robert Oldham ------------------------------------------------------------------------ Oldham Technology W: 801-877-2190 x801 E: robert@oldhamtechnology.com http://www.oldhamtechnology.com On 01/02/2015 12:55 PM, Luis Daniel Lucio Quiroz wrote:
If it is a NAT issue, you may want to try NDLB-force-rport=true/safe
Luis Daniel Lucio Quiroz CISSP, CISM, CISA Linux, VoIP and much more fun www.okay.com.mx <http://www.okay.com.mx>
Need LCR? Check out LCR for FusionPBX with FreeSWITCH Need Billing? Check out Billing for FusionPBX with FreeSWITCH
2015-01-02 13:31 GMT-05:00 Robert Oldham <robert@oldhamtechnology.com <mailto:robert@oldhamtechnology.com>>:
Thank you Vik. I'll try that too.
Robert Oldham ------------------------------------------------------------------------ Oldham Technology W: 801-877-2190 x801 <tel:801-877-2190%20x801> E: robert@oldhamtechnology.com <mailto:robert@oldhamtechnology.com> http://www.oldhamtechnology.com
On 01/02/2015 10:01 AM, Vik Killa wrote:
I have Cisco SPA5XX setup in multi-tenant mode. I used the proxy params to accomplish it, that way I did not need a FQDN to resolve. Here is an example from my prov files (192.168.0.100 is IP of FS and '3.local' is made up domain for a tenant)
<Extension_1_ group="Phone/Line_Key_1">1</Extension_1_> <Short_Name_1_ group="Phone/Line_Key_1">E. 1000</Short_Name_1_> <Share_Call_Appearance_1_ group="Phone/Line_Key_1">private</Share_Call_Appearance_1_> <Share_Ext_1_ group="Ext_1/Share_Line_Appearance">private</Share_Ext_1_> <Proxy_1_ group="Ext_1/Proxy_and_Registration">3.local</Proxy_1_> <Outbound_Proxy_1_ group="Ext_1/Proxy_and_Registration">192.168.0.100</Outbound_Proxy_1_> <Use_Outbound_Proxy_1_ group="Ext_1/Proxy_and_Registration">Yes</Use_Outbound_Proxy_1_> <Use_OB_Proxy_In_Dialog_1_ group="Ext_1/Proxy_and_Registration">Yes</Use_OB_Proxy_In_Dialog_1_> <User_ID_1_ group="Ext_1/Subscriber_Information">1000</User_ID_1_> <Password_1_ group="Ext_1/Subscriber_Information">**********</Password_1_> <Use_Anonymous_With_RPID_1_ group="Ext_1/SIP_Settings">No</Use_Anonymous_With_RPID_1_> <Dial_Plan_1_ group="Ext_1/Dial_Plan">[x*].</Dial_Plan_1_> <Voice_Mail_Server_1_ ua="na">1000@3.local <mailto:1000@3.local></Voice_Mail_Server_1_> <Register_Expires_1_ group="Ext_1/Proxy_and_Registration">300</Register_Expires_1_> <Subscription_Expires_1_ group="Ext_1/Share_Line_Appearance">300</Subscription_Expires_1_> <Voice_Mail_Subscribe_Interval_1_ group="Ext_1/Call_Feature_Settings">300</Voice_Mail_Subscribe_Interval_1_>
On Fri, Jan 2, 2015 at 11:40 AM, Robert Oldham <robert@oldhamtechnology.com <mailto:robert@oldhamtechnology.com>> wrote:
Florent,
I am not sure I understand which logs you mean. Logs from the Cisco spa 112, FreeSWITCH, the firewall, or all of the above?
Thanks, Robert Oldham ------------------------------------------------------------------------ Oldham Technology W: 801-877-2190 x801 <tel:801-877-2190%20x801> E: robert@oldhamtechnology.com <mailto:robert@oldhamtechnology.com> http://www.oldhamtechnology.com
On 01/02/2015 12:45 AM, Florent Krieg wrote:
Hello,
What do you see in the logs? That might be relevant to understand what it tries to do.
Florent
Le 2 janv. 2015 08:15, "Robert Oldham" <robert@oldhamtechnology.com <mailto:robert@oldhamtechnology.com>> a écrit :
I am registering to the FQDN of the domain.
There is a NAT involved. The PBX is not behind NAT. The phones are behind NAT on separate network.
Thank you,
Robert Oldham Oldham Technology Phone: (801) 877-2190 <tel:%28801%29%20877-2190> Email: robert@oldhamtechnology.com <mailto:robert@oldhamtechnology.com> Website: https://www.oldhamtechnology.com
On January 1, 2015 7:41:45 PM MST, Moishe Grunstein <max@nysolutions.com <mailto:max@nysolutions.com>> wrote:
Are you registering to the FQDN of the domain?
Is there any NAT involved? PBX behind NAT? phones behind NAT?
Thanks,
Moishe Grunstein
Tornado Computer Systems, Inc.
212.400.7650 <tel:212.400.7650> 888.IPPBX.US <http://888.IPPBX.US> *Service Request Email: support@nysolutions.com <mailto:support@nysolutions.com> *
Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified
cid:image001.jpg@01C72F94.9EE45D60 <http://www.nysolutions.com/>
Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS
*From:*freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org>] *On Behalf Of *Robert Oldham *Sent:* Thursday, January 1, 2015 7:49 PM *To:* freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org> *Subject:* [Freeswitch-users] multi-tenant registration for Cisco spa 112
I am a freeswitch noob, so please forgive me if my questions are not coherent with proper concepts. I have made an earnest attempt to find clues to my problem on the wiki and elsewhere, but suspect I am asking the wrong questions.
Problem: I cannot get a Cisco spa 112 to register properly.
Context: I am trying to put together a proof of concept multi-tenant freeswitch server. After reading the book FreeSWITCH 1.2 by Anthony Minessale, I used the FusionPBX install script to get freeswitch 1.4.14 built on a fresh Ubuntu 12.04 install. I configured a domain name to point to the new server. On the server I added the domain in the directory and 3 users/extensions along with several sip gateways. The gateways work. One of the extensions has a Grandstream GXP2160 registered successfully, another has a Zoiper soft phone registered successfully.
Details: I have tried to configure and get a Cisco SPA 112 to register on the 3rd extension. However, it is failing to register. I have watched the sip trace and packet capture. Both show the same thing: the Cisco SPA sends a sip register request to which sofia responds with a 401 "unauthorized". Then, instead of sending a sip register with an authorization digest as the other phones do, the Cisco spa 112, sends another generic sip register request, which elicits another 401 "unauthorized" from sofia. This repeats a few times, and then the spa 112 gives up, waits 40 seconds and then does it all over again.
I have had this device registered with an asterisk server without trouble. I have reset the device to factory defaults and updated the firmware, all without any change.
The domain name is fairly long. Don't know if that might be a factor.
Any clues where I might look next or tests I might try for more information?
Thank you,
Robert Oldham Oldham Technology Phone: (801) 877-2190 <tel:%28801%29%20877-2190> Email: robert@oldhamtechnology.com <mailto:robert@oldhamtechnology.com> Website: https://www.oldhamtechnology.com
------------------------------------------------------------------------
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Check this in this order: 1. tenant domain must resolve to a IP or you must use Proxy settings in your phone 2. your tenant domain must not exceed 63 characteers (DNS restriction) 3. registar setting on your phone must be using the tenant domain, not the IP if you only get 401 answers, that means you are not sending the authentication if you get 403 answers, means you are sending wrong authentication -- Luis Daniel Lucio Quiroz CISSP, CISM, CISA Linux, VoIP and much more fun www.okay.com.mx Need LCR? Check out LCR for FusionPBX with FreeSWITCH Need Billing? Check out Billing for FusionPBX with FreeSWITCH 2015-01-01 19:48 GMT-05:00 Robert Oldham <robert@oldhamtechnology.com>:
I am a freeswitch noob, so please forgive me if my questions are not coherent with proper concepts. I have made an earnest attempt to find clues to my problem on the wiki and elsewhere, but suspect I am asking the wrong questions.
Problem: I cannot get a Cisco spa 112 to register properly.
Context: I am trying to put together a proof of concept multi-tenant freeswitch server. After reading the book FreeSWITCH 1.2 by Anthony Minessale, I used the FusionPBX install script to get freeswitch 1.4.14 built on a fresh Ubuntu 12.04 install. I configured a domain name to point to the new server. On the server I added the domain in the directory and 3 users/extensions along with several sip gateways. The gateways work. One of the extensions has a Grandstream GXP2160 registered successfully, another has a Zoiper soft phone registered successfully.
Details: I have tried to configure and get a Cisco SPA 112 to register on the 3rd extension. However, it is failing to register. I have watched the sip trace and packet capture. Both show the same thing: the Cisco SPA sends a sip register request to which sofia responds with a 401 "unauthorized". Then, instead of sending a sip register with an authorization digest as the other phones do, the Cisco spa 112, sends another generic sip register request, which elicits another 401 "unauthorized" from sofia. This repeats a few times, and then the spa 112 gives up, waits 40 seconds and then does it all over again.
I have had this device registered with an asterisk server without trouble. I have reset the device to factory defaults and updated the firmware, all without any change.
The domain name is fairly long. Don't know if that might be a factor.
Any clues where I might look next or tests I might try for more information?
Thank you,
Robert Oldham Oldham Technology Phone: (801) 877-2190 Email: robert@oldhamtechnology.com Website: https://www.oldhamtechnology.com
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
1. Tenant domain is a valid domain that resolves to an IP address. Using the domain, the Cisco spa 112 contacts the server with the registration request. 2. The tenant domain is 27 characters. 3. The Cisco spa 112 is using the domain name and not the IP address of the server. I am only getting 401 answers, no 403s. This is what is confusing me: I am struggling to understand why the device will not send the authentication. Thank you, Robert On January 1, 2015 8:50:30 PM MST, Luis Daniel Lucio Quiroz <luis.daniel.lucio@gmail.com> wrote:
Check this in this order:
1. tenant domain must resolve to a IP or you must use Proxy settings in your phone 2. your tenant domain must not exceed 63 characteers (DNS restriction) 3. registar setting on your phone must be using the tenant domain, not the IP
if you only get 401 answers, that means you are not sending the authentication if you get 403 answers, means you are sending wrong authentication
-- Luis Daniel Lucio Quiroz CISSP, CISM, CISA Linux, VoIP and much more fun www.okay.com.mx
Need LCR? Check out LCR for FusionPBX with FreeSWITCH Need Billing? Check out Billing for FusionPBX with FreeSWITCH
2015-01-01 19:48 GMT-05:00 Robert Oldham <robert@oldhamtechnology.com>:
I am a freeswitch noob, so please forgive me if my questions are not coherent with proper concepts. I have made an earnest attempt to find clues to my problem on the wiki and elsewhere, but suspect I am asking the wrong questions.
Problem: I cannot get a Cisco spa 112 to register properly.
Context: I am trying to put together a proof of concept multi-tenant freeswitch server. After reading the book FreeSWITCH 1.2 by Anthony Minessale, I used the FusionPBX install script to get freeswitch 1.4.14 built on a fresh Ubuntu 12.04 install. I configured a domain name to point to the new server. On the server I added the domain in the directory and 3 users/extensions along with several sip gateways. The gateways work. One of the extensions has a Grandstream GXP2160 registered successfully, another has a Zoiper soft phone registered successfully.
Details: I have tried to configure and get a Cisco SPA 112 to register on the 3rd extension. However, it is failing to register. I have watched the sip trace and packet capture. Both show the same thing: the Cisco SPA sends a sip register request to which sofia responds with a 401 "unauthorized". Then, instead of sending a sip register with an authorization digest as the other phones do, the Cisco spa 112, sends another generic sip register request, which elicits another 401 "unauthorized" from sofia. This repeats a few times, and then the spa 112 gives up, waits 40 seconds and then does it all over again.
I have had this device registered with an asterisk server without trouble. I have reset the device to factory defaults and updated the firmware, all without any change.
The domain name is fairly long. Don't know if that might be a factor.
Any clues where I might look next or tests I might try for more information?
Thank you,
Robert Oldham Oldham Technology Phone: (801) 877-2190 Email: robert@oldhamtechnology.com Website: https://www.oldhamtechnology.com
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hello, This is most likely a nat problem. The spa is not getting the unauthorized response. Regards,
On 02 Jan 2015, at 08:02, Robert Oldham <robert@oldhamtechnology.com> wrote:
1. Tenant domain is a valid domain that resolves to an IP address. Using the domain, the Cisco spa 112 contacts the server with the registration request. 2. The tenant domain is 27 characters. 3. The Cisco spa 112 is using the domain name and not the IP address of the server.
I am only getting 401 answers, no 403s. This is what is confusing me: I am struggling to understand why the device will not send the authentication.
Thank you, Robert
On January 1, 2015 8:50:30 PM MST, Luis Daniel Lucio Quiroz <luis.daniel.lucio@gmail.com> wrote: Check this in this order:
1. tenant domain must resolve to a IP or you must use Proxy settings in your phone 2. your tenant domain must not exceed 63 characteers (DNS restriction) 3. registar setting on your phone must be using the tenant domain, not the IP
if you only get 401 answers, that means you are not sending the authentication if you get 403 answers, means you are sending wrong authentication
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I'll check that. I'll grab a packet capture within the local network and see if those packets are making it back. If it is a NAT problem, it is a little confusing that the other phones are getting theirs on the same network behind the same NAT. Thanks, Robert Oldham ------------------------------------------------------------------------ Oldham Technology W: 801-877-2190 x801 E: robert@oldhamtechnology.com http://www.oldhamtechnology.com On 01/02/2015 12:13 AM, Stefan Kainz wrote:
Hello,
This is most likely a nat problem. The spa is not getting the unauthorized response.
Regards,
On 02 Jan 2015, at 08:02, Robert Oldham <robert@oldhamtechnology.com <mailto:robert@oldhamtechnology.com>> wrote:
1. Tenant domain is a valid domain that resolves to an IP address. Using the domain, the Cisco spa 112 contacts the server with the registration request. 2. The tenant domain is 27 characters. 3. The Cisco spa 112 is using the domain name and not the IP address of the server.
I am only getting 401 answers, no 403s. This is what is confusing me: I am struggling to understand why the device will not send the authentication.
Thank you, Robert
On January 1, 2015 8:50:30 PM MST, Luis Daniel Lucio Quiroz <luis.daniel.lucio@gmail.com <mailto:luis.daniel.lucio@gmail.com>> wrote:
Check this in this order:
1. tenant domain must resolve to a IP or you must use Proxy settings in your phone 2. your tenant domain must not exceed 63 characteers (DNS restriction) 3. registar setting on your phone must be using the tenant domain, not the IP
if you only get 401 answers, that means you are not sending the authentication if you get 403 answers, means you are sending wrong authentication
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (6)
-
Florent Krieg
-
Luis Daniel Lucio Quiroz
-
Moishe Grunstein
-
Robert Oldham
-
Stefan Kainz
-
Vik Killa