Hello, I can't make outbound calls with openzap. I have try to make outbound calls over asterisk and it's work. So I think that the zaptel konfiguration is okay. Or I'm wrong? What's the mistake? I get this error on the console: 2009-01-27 15:32:45 [INFO] mod_dialplan_xml.c:222 dialplan_hunt() Processing 111->017XXXX@default 2009-01-27 15:32:45 [NOTICE] switch_channel.c:534 switch_channel_set_name() New Channel OpenZAP/1:1/017XXXX [2b330882-1286-4b8b-bfe6-825cee3c8268] 2009-01-27 15:32:45 [ERR] zap_isdn.c:559 state_advance() 1:1 STATE [DIALING] freeswitch.log: 2009-01-27 15:32:45 [DEBUG] mod_openzap.c:339 tech_init() Set codec PCMA 20ms 2009-01-27 15:32:45 [DEBUG] mod_openzap.c:931 channel_outgoing_channel() Connect outbound channel OpenZAP/1:1/017XXXX 2009-01-27 15:32:45 [NOTICE] switch_channel.c:534 switch_channel_set_name() New Channel OpenZAP/1:1/017XXXX [2b330882-1286-4b8b-bfe6-825cee3c8268] 2009-01-27 15:32:45 [DEBUG] mod_openzap.c:940 channel_outgoing_channel() OpenZAP/1:1/017XXXX State Change CS_NEW -> CS_INIT 2009-01-27 15:32:45 [DEBUG] switch_core_session.c:722 switch_core_session_signal_state_change() Kill OpenZAP/1:1/017XXXX [BREAK] 2009-01-27 15:32:45 [DEBUG] zap_isdn.c:56 isdn_outgoing_call() Changing state on 1:1 from DOWN to DIALING 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:365 switch_core_session_run() OpenZAP/1:1/017XXXX Running State Change CS_INIT 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:415 switch_core_session_run() (OpenZAP/1:1/017XXXX) State INIT 2009-01-27 15:32:45 [DEBUG] mod_openzap.c:363 channel_on_init() OpenZAP/1:1/017XXXX State Change CS_INIT -> CS_ROUTING 2009-01-27 15:32:45 [DEBUG] switch_core_session.c:722 switch_core_session_signal_state_change() Kill OpenZAP/1:1/017XXXX [BREAK] 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:415 switch_core_session_run() (OpenZAP/1:1/017XXXX) State INIT going to sleep 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:365 switch_core_session_run() OpenZAP/1:1/017XXXX Running State Change CS_ROUTING 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:420 switch_core_session_run() (OpenZAP/1:1/017XXXX) State ROUTING 2009-01-27 15:32:45 [DEBUG] mod_openzap.c:384 channel_on_routing() OpenZAP/1:1/017XXXX CHANNEL ROUTING 2009-01-27 15:32:45 [DEBUG] switch_ivr_originate.c:57 originate_on_routing() OpenZAP/1:1/017XXXX State Change CS_ROUTING -> CS_CONSUME_MEDIA 2009-01-27 15:32:45 [DEBUG] switch_core_session.c:722 switch_core_session_signal_state_change() Kill OpenZAP/1:1/017XXXX [BREAK] 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:420 switch_core_session_run() (OpenZAP/1:1/017XXXX) State ROUTING going to sleep 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:365 switch_core_session_run() OpenZAP/1:1/017XXXX Running State Change CS_CONSUME_MEDIA 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:442 switch_core_session_run() (OpenZAP/1:1/017XXXX) State CONSUME_MEDIA 2009-01-27 15:32:45 [ERR] zap_isdn.c:559 state_advance() 1:1 STATE [DIALING] 2009-01-27 15:32:45 [DEBUG] zap_isdn.c:957 q931_rx_32() WRITE 55 -- NUR NOCH BIS 31.01.! GMX FreeDSL - Telefonanschluss + DSL für nur 16,37 EURO/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K11308T4569a
Would you mind giving us some more information? Please use pastebin.freeswitch.org to post your configuration files. Also, if you could review the information here: http://wiki.freeswitch.org/wiki/Reporting_Bugs it will help you gather what you need. See the section on openzap to know what information to supply. That will help us to diagnose what is happening. -MC On Tue, Jan 27, 2009 at 8:41 AM, "Franziska Röhler" <curly2009@gmx.de> wrote:
Hello,
I can't make outbound calls with openzap. I have try to make outbound calls over asterisk and it's work. So I think that the zaptel konfiguration is okay. Or I'm wrong? What's the mistake?
I get this error on the console:
2009-01-27 15:32:45 [INFO] mod_dialplan_xml.c:222 dialplan_hunt() Processing 111->017XXXX@default 2009-01-27 15:32:45 [NOTICE] switch_channel.c:534 switch_channel_set_name() New Channel OpenZAP/1:1/017XXXX [2b330882-1286-4b8b-bfe6-825cee3c8268] 2009-01-27 15:32:45 [ERR] zap_isdn.c:559 state_advance() 1:1 STATE [DIALING]
freeswitch.log:
2009-01-27 15:32:45 [DEBUG] mod_openzap.c:339 tech_init() Set codec PCMA 20ms 2009-01-27 15:32:45 [DEBUG] mod_openzap.c:931 channel_outgoing_channel() Connect outbound channel OpenZAP/1:1/017XXXX 2009-01-27 15:32:45 [NOTICE] switch_channel.c:534 switch_channel_set_name() New Channel OpenZAP/1:1/017XXXX [2b330882-1286-4b8b-bfe6-825cee3c8268] 2009-01-27 15:32:45 [DEBUG] mod_openzap.c:940 channel_outgoing_channel() OpenZAP/1:1/017XXXX State Change CS_NEW -> CS_INIT 2009-01-27 15:32:45 [DEBUG] switch_core_session.c:722 switch_core_session_signal_state_change() Kill OpenZAP/1:1/017XXXX [BREAK] 2009-01-27 15:32:45 [DEBUG] zap_isdn.c:56 isdn_outgoing_call() Changing state on 1:1 from DOWN to DIALING 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:365 switch_core_session_run() OpenZAP/1:1/017XXXX Running State Change CS_INIT 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:415 switch_core_session_run() (OpenZAP/1:1/017XXXX) State INIT 2009-01-27 15:32:45 [DEBUG] mod_openzap.c:363 channel_on_init() OpenZAP/1:1/017XXXX State Change CS_INIT -> CS_ROUTING 2009-01-27 15:32:45 [DEBUG] switch_core_session.c:722 switch_core_session_signal_state_change() Kill OpenZAP/1:1/017XXXX [BREAK] 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:415 switch_core_session_run() (OpenZAP/1:1/017XXXX) State INIT going to sleep 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:365 switch_core_session_run() OpenZAP/1:1/017XXXX Running State Change CS_ROUTING 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:420 switch_core_session_run() (OpenZAP/1:1/017XXXX) State ROUTING 2009-01-27 15:32:45 [DEBUG] mod_openzap.c:384 channel_on_routing() OpenZAP/1:1/017XXXX CHANNEL ROUTING 2009-01-27 15:32:45 [DEBUG] switch_ivr_originate.c:57 originate_on_routing() OpenZAP/1:1/017XXXX State Change CS_ROUTING -> CS_CONSUME_MEDIA 2009-01-27 15:32:45 [DEBUG] switch_core_session.c:722 switch_core_session_signal_state_change() Kill OpenZAP/1:1/017XXXX [BREAK] 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:420 switch_core_session_run() (OpenZAP/1:1/017XXXX) State ROUTING going to sleep 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:365 switch_core_session_run() OpenZAP/1:1/017XXXX Running State Change CS_CONSUME_MEDIA 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:442 switch_core_session_run() (OpenZAP/1:1/017XXXX) State CONSUME_MEDIA 2009-01-27 15:32:45 [ERR] zap_isdn.c:559 state_advance() 1:1 STATE [DIALING] 2009-01-27 15:32:45 [DEBUG] zap_isdn.c:957 q931_rx_32() WRITE 55
-- NUR NOCH BIS 31.01.! GMX FreeDSL - Telefonanschluss + DSL für nur 16,37 EURO/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K11308T4569a
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I posted the configuration files in pastebin.freeswitch.org
Would you mind giving us some more information? Please use pastebin.freeswitch.org to post your configuration files. Also, if you could review the information here:
http://wiki.freeswitch.org/wiki/Reporting_Bugs
it will help you gather what you need. See the section on openzap to know what information to supply. That will help us to diagnose what is happening. -MC
On Tue, Jan 27, 2009 at 8:41 AM, <curly2009@gmx.de> wrote:
Hello,
I can't make outbound calls with openzap. I have try to make outbound calls over asterisk and it's work. So I think that the zaptel konfiguration is okay. Or I'm wrong? What's the mistake?
I get this error on the console:
2009-01-27 15:32:45 [INFO] mod_dialplan_xml.c:222 dialplan_hunt() Processing 111->017XXXX@default 2009-01-27 15:32:45 [NOTICE] switch_channel.c:534 switch_channel_set_name() New Channel OpenZAP/1:1/017XXXX [2b330882-1286-4b8b-bfe6-825cee3c8268] 2009-01-27 15:32:45 [ERR] zap_isdn.c:559 state_advance() 1:1 STATE [DIALING]
freeswitch.log:
2009-01-27 15:32:45 [DEBUG] mod_openzap.c:339 tech_init() Set codec PCMA 20ms 2009-01-27 15:32:45 [DEBUG] mod_openzap.c:931 channel_outgoing_channel() Connect outbound channel OpenZAP/1:1/017XXXX 2009-01-27 15:32:45 [NOTICE] switch_channel.c:534 switch_channel_set_name() New Channel OpenZAP/1:1/017XXXX [2b330882-1286-4b8b-bfe6-825cee3c8268] 2009-01-27 15:32:45 [DEBUG] mod_openzap.c:940 channel_outgoing_channel() OpenZAP/1:1/017XXXX State Change CS_NEW -> CS_INIT 2009-01-27 15:32:45 [DEBUG] switch_core_session.c:722 switch_core_session_signal_state_change() Kill OpenZAP/1:1/017XXXX [BREAK] 2009-01-27 15:32:45 [DEBUG] zap_isdn.c:56 isdn_outgoing_call() Changing state on 1:1 from DOWN to DIALING 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:365 switch_core_session_run() OpenZAP/1:1/017XXXX Running State Change CS_INIT 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:415 switch_core_session_run() (OpenZAP/1:1/017XXXX) State INIT 2009-01-27 15:32:45 [DEBUG] mod_openzap.c:363 channel_on_init() OpenZAP/1:1/017XXXX State Change CS_INIT -> CS_ROUTING 2009-01-27 15:32:45 [DEBUG] switch_core_session.c:722 switch_core_session_signal_state_change() Kill OpenZAP/1:1/017XXXX [BREAK] 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:415 switch_core_session_run() (OpenZAP/1:1/017XXXX) State INIT going to sleep 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:365 switch_core_session_run() OpenZAP/1:1/017XXXX Running State Change CS_ROUTING 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:420 switch_core_session_run() (OpenZAP/1:1/017XXXX) State ROUTING 2009-01-27 15:32:45 [DEBUG] mod_openzap.c:384 channel_on_routing() OpenZAP/1:1/017XXXX CHANNEL ROUTING 2009-01-27 15:32:45 [DEBUG] switch_ivr_originate.c:57 originate_on_routing() OpenZAP/1:1/017XXXX State Change CS_ROUTING -> CS_CONSUME_MEDIA 2009-01-27 15:32:45 [DEBUG] switch_core_session.c:722 switch_core_session_signal_state_change() Kill OpenZAP/1:1/017XXXX [BREAK] 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:420 switch_core_session_run() (OpenZAP/1:1/017XXXX) State ROUTING going to sleep 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:365 switch_core_session_run() OpenZAP/1:1/017XXXX Running State Change CS_CONSUME_MEDIA 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:442 switch_core_session_run() (OpenZAP/1:1/017XXXX) State CONSUME_MEDIA 2009-01-27 15:32:45 [ERR] zap_isdn.c:559 state_advance() 1:1 STATE [DIALING] 2009-01-27 15:32:45 [DEBUG] zap_isdn.c:957 q931_rx_32() WRITE 55
-- NUR NOCH BIS 31.01.! GMX FreeDSL - Telefonanschluss + DSL für nur 16,37 EURO/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K11308T4569a
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger
Is this analog FXO? Analog FXO needs to detect a dial tone to make an outbound call. Do you have the tones configured properly for your location? Are you using the latest revision of the CODE? You should not paste only small snippets of log, it's better to paste the whole log of the call start to finish. On Wed, Jan 28, 2009 at 7:24 AM, <curly2009@gmx.de> wrote:
I posted the configuration files in pastebin.freeswitch.org
Would you mind giving us some more information? Please use pastebin.freeswitch.org to post your configuration files. Also, if you could review the information here:
http://wiki.freeswitch.org/wiki/Reporting_Bugs
it will help you gather what you need. See the section on openzap to know what information to supply. That will help us to diagnose what is happening. -MC
On Tue, Jan 27, 2009 at 8:41 AM, <curly2009@gmx.de> wrote:
Hello,
I can't make outbound calls with openzap. I have try to make outbound calls over asterisk and it's work. So I think that the zaptel konfiguration is okay. Or I'm wrong? What's the mistake?
I get this error on the console:
2009-01-27 15:32:45 [INFO] mod_dialplan_xml.c:222 dialplan_hunt() Processing 111->017XXXX@default 2009-01-27 15:32:45 [NOTICE] switch_channel.c:534 switch_channel_set_name() New Channel OpenZAP/1:1/017XXXX [2b330882-1286-4b8b-bfe6-825cee3c8268] 2009-01-27 15:32:45 [ERR] zap_isdn.c:559 state_advance() 1:1 STATE [DIALING]
freeswitch.log:
2009-01-27 15:32:45 [DEBUG] mod_openzap.c:339 tech_init() Set codec PCMA 20ms 2009-01-27 15:32:45 [DEBUG] mod_openzap.c:931 channel_outgoing_channel() Connect outbound channel OpenZAP/1:1/017XXXX 2009-01-27 15:32:45 [NOTICE] switch_channel.c:534 switch_channel_set_name() New Channel OpenZAP/1:1/017XXXX [2b330882-1286-4b8b-bfe6-825cee3c8268] 2009-01-27 15:32:45 [DEBUG] mod_openzap.c:940 channel_outgoing_channel() OpenZAP/1:1/017XXXX State Change CS_NEW -> CS_INIT 2009-01-27 15:32:45 [DEBUG] switch_core_session.c:722 switch_core_session_signal_state_change() Kill OpenZAP/1:1/017XXXX [BREAK] 2009-01-27 15:32:45 [DEBUG] zap_isdn.c:56 isdn_outgoing_call() Changing state on 1:1 from DOWN to DIALING 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:365 switch_core_session_run() OpenZAP/1:1/017XXXX Running State Change CS_INIT 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:415 switch_core_session_run() (OpenZAP/1:1/017XXXX) State INIT 2009-01-27 15:32:45 [DEBUG] mod_openzap.c:363 channel_on_init() OpenZAP/1:1/017XXXX State Change CS_INIT -> CS_ROUTING 2009-01-27 15:32:45 [DEBUG] switch_core_session.c:722 switch_core_session_signal_state_change() Kill OpenZAP/1:1/017XXXX [BREAK] 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:415 switch_core_session_run() (OpenZAP/1:1/017XXXX) State INIT going to sleep 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:365 switch_core_session_run() OpenZAP/1:1/017XXXX Running State Change CS_ROUTING 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:420 switch_core_session_run() (OpenZAP/1:1/017XXXX) State ROUTING 2009-01-27 15:32:45 [DEBUG] mod_openzap.c:384 channel_on_routing() OpenZAP/1:1/017XXXX CHANNEL ROUTING 2009-01-27 15:32:45 [DEBUG] switch_ivr_originate.c:57 originate_on_routing() OpenZAP/1:1/017XXXX State Change CS_ROUTING -> CS_CONSUME_MEDIA 2009-01-27 15:32:45 [DEBUG] switch_core_session.c:722 switch_core_session_signal_state_change() Kill OpenZAP/1:1/017XXXX [BREAK] 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:420 switch_core_session_run() (OpenZAP/1:1/017XXXX) State ROUTING going to sleep 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:365 switch_core_session_run() OpenZAP/1:1/017XXXX Running State Change CS_CONSUME_MEDIA 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:442 switch_core_session_run() (OpenZAP/1:1/017XXXX) State CONSUME_MEDIA 2009-01-27 15:32:45 [ERR] zap_isdn.c:559 state_advance() 1:1 STATE [DIALING] 2009-01-27 15:32:45 [DEBUG] zap_isdn.c:957 q931_rx_32() WRITE 55
-- NUR NOCH BIS 31.01.! GMX FreeDSL - Telefonanschluss + DSL für nur 16,37 EURO/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K11308T4569a
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
It's ISDN PRI. Digium Wildcard TE110P I don't edit tones.conf. I leave this to the defaults. I using freeswitch-1.0.1 zaptel-1.4.12 I posted the whole log of the call in pastebin.freeswitch.org.
Is this analog FXO?
Analog FXO needs to detect a dial tone to make an outbound call. Do you have the tones configured properly for your location?
Are you using the latest revision of the CODE?
You should not paste only small snippets of log, it's better to paste the whole log of the call start to finish.
On Wed, Jan 28, 2009 at 7:24 AM, <curly2009@gmx.de> wrote:
I posted the configuration files in pastebin.freeswitch.org
Would you mind giving us some more information? Please use pastebin.freeswitch.org to post your configuration files. Also, if you could review the information here:
http://wiki.freeswitch.org/wiki/Reporting_Bugs
it will help you gather what you need. See the section on openzap to know what information to supply. That will help us to diagnose what is happening. -MC
On Tue, Jan 27, 2009 at 8:41 AM, <curly2009@gmx.de> wrote:
Hello,
I can't make outbound calls with openzap. I have try to make outbound calls over asterisk and it's work. So I think that the zaptel konfiguration is okay. Or I'm wrong? What's the mistake?
I get this error on the console:
2009-01-27 15:32:45 [INFO] mod_dialplan_xml.c:222 dialplan_hunt() Processing 111->017XXXX@default 2009-01-27 15:32:45 [NOTICE] switch_channel.c:534 switch_channel_set_name() New Channel OpenZAP/1:1/017XXXX [2b330882-1286-4b8b-bfe6-825cee3c8268] 2009-01-27 15:32:45 [ERR] zap_isdn.c:559 state_advance() 1:1 STATE [DIALING]
freeswitch.log:
2009-01-27 15:32:45 [DEBUG] mod_openzap.c:339 tech_init() Set codec PCMA 20ms 2009-01-27 15:32:45 [DEBUG] mod_openzap.c:931 channel_outgoing_channel() Connect outbound channel OpenZAP/1:1/017XXXX 2009-01-27 15:32:45 [NOTICE] switch_channel.c:534 switch_channel_set_name() New Channel OpenZAP/1:1/017XXXX [2b330882-1286-4b8b-bfe6-825cee3c8268] 2009-01-27 15:32:45 [DEBUG] mod_openzap.c:940 channel_outgoing_channel() OpenZAP/1:1/017XXXX State Change CS_NEW -> CS_INIT 2009-01-27 15:32:45 [DEBUG] switch_core_session.c:722 switch_core_session_signal_state_change() Kill OpenZAP/1:1/017XXXX [BREAK] 2009-01-27 15:32:45 [DEBUG] zap_isdn.c:56 isdn_outgoing_call() Changing state on 1:1 from DOWN to DIALING 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:365 switch_core_session_run() OpenZAP/1:1/017XXXX Running State Change CS_INIT 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:415 switch_core_session_run() (OpenZAP/1:1/017XXXX) State INIT 2009-01-27 15:32:45 [DEBUG] mod_openzap.c:363 channel_on_init() OpenZAP/1:1/017XXXX State Change CS_INIT -> CS_ROUTING 2009-01-27 15:32:45 [DEBUG] switch_core_session.c:722 switch_core_session_signal_state_change() Kill OpenZAP/1:1/017XXXX [BREAK] 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:415 switch_core_session_run() (OpenZAP/1:1/017XXXX) State INIT going to sleep 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:365 switch_core_session_run() OpenZAP/1:1/017XXXX Running State Change CS_ROUTING 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:420 switch_core_session_run() (OpenZAP/1:1/017XXXX) State ROUTING 2009-01-27 15:32:45 [DEBUG] mod_openzap.c:384 channel_on_routing() OpenZAP/1:1/017XXXX CHANNEL ROUTING 2009-01-27 15:32:45 [DEBUG] switch_ivr_originate.c:57 originate_on_routing() OpenZAP/1:1/017XXXX State Change CS_ROUTING -> CS_CONSUME_MEDIA 2009-01-27 15:32:45 [DEBUG] switch_core_session.c:722 switch_core_session_signal_state_change() Kill OpenZAP/1:1/017XXXX [BREAK] 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:420 switch_core_session_run() (OpenZAP/1:1/017XXXX) State ROUTING going to sleep 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:365 switch_core_session_run() OpenZAP/1:1/017XXXX Running State Change CS_CONSUME_MEDIA 2009-01-27 15:32:45 [DEBUG] switch_core_state_machine.c:442 switch_core_session_run() (OpenZAP/1:1/017XXXX) State CONSUME_MEDIA 2009-01-27 15:32:45 [ERR] zap_isdn.c:559 state_advance() 1:1 STATE [DIALING] 2009-01-27 15:32:45 [DEBUG] zap_isdn.c:957 q931_rx_32() WRITE 55
-- NUR NOCH BIS 31.01.! GMX FreeDSL - Telefonanschluss + DSL für nur 16,37 EURO/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K11308T4569a
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
-- Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
-- NUR NOCH BIS 31.01.! GMX FreeDSL - Telefonanschluss + DSL für nur 16,37 EURO/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K11308T4569a
Have you tried with the latest FreeSWITCH Trunk? /b On Jan 28, 2009, at 10:01 AM, curly2009@gmx.de wrote:
It's ISDN PRI. Digium Wildcard TE110P
I don't edit tones.conf. I leave this to the defaults.
I using freeswitch-1.0.1 zaptel-1.4.12
I posted the whole log of the call in pastebin.freeswitch.org.
no I don't have try it. I have to execute "make current" in the Freeswitch source directory, or something else? -------- Original-Nachricht --------
Datum: Wed, 28 Jan 2009 10:11:36 -0600 Von: Brian West <brian@freeswitch.org> An: freeswitch-users@lists.freeswitch.org Betreff: Re: [Freeswitch-users] Can\'t dial over openzap
Have you tried with the latest FreeSWITCH Trunk?
/b
On Jan 28, 2009, at 10:01 AM, curly2009@gmx.de wrote:
It's ISDN PRI. Digium Wildcard TE110P
I don't edit tones.conf. I leave this to the defaults.
I using freeswitch-1.0.1 zaptel-1.4.12
I posted the whole log of the call in pastebin.freeswitch.org.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- NUR NOCH BIS 31.01.! GMX FreeDSL - Telefonanschluss + DSL für nur 16,37 EURO/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K11308T4569a
I just added a small section to the reporting bugs page on the wiki. It specifically talks about this subject: http://wiki.freeswitch.org/wiki/Reporting_Bugs#Upgrading_From_Older_Revision... In simple terms, you are best to copy your configs to a safe location, then delete your /usr/src/freeswitch directory, then delete your fs source directory, and then do a fresh checkout & install. Personally, on Linux I like doing the "quick and dirty install": http://wiki.freeswitch.org/wiki/Quick_and_Dirty_Install After your fresh install is complete, go back and make your customizations, like editing the modules.conf and modules.conf.xml, installing openzap, etc. Then test and report back. -MC On Wed, Jan 28, 2009 at 8:23 AM, <curly2009@gmx.de> wrote:
no I don't have try it.
I have to execute "make current" in the Freeswitch source directory, or something else?
-------- Original-Nachricht --------
Datum: Wed, 28 Jan 2009 10:11:36 -0600 Von: Brian West <brian@freeswitch.org> An: freeswitch-users@lists.freeswitch.org Betreff: Re: [Freeswitch-users] Can\'t dial over openzap
Have you tried with the latest FreeSWITCH Trunk?
/b
On Jan 28, 2009, at 10:01 AM, curly2009@gmx.de wrote:
It's ISDN PRI. Digium Wildcard TE110P
I don't edit tones.conf. I leave this to the defaults.
I using freeswitch-1.0.1 zaptel-1.4.12
I posted the whole log of the call in pastebin.freeswitch.org.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- NUR NOCH BIS 31.01.! GMX FreeDSL - Telefonanschluss + DSL für nur 16,37 EURO/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K11308T4569a
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I tried with the latest FreeSwitch Trunk and it's work now. But now two snom phones can do only inbound calls. when I do a outbound call I get this error on the console: 2009-01-29 15:26:43 [DEBUG] sofia.c:3785 sofia_handle_sip_i_invite() IP 10.xx.xx.xx Rejected by acl "domains". Falling back to Digest auth. 2009-01-29 15:26:43 [DEBUG] sofia.c:3785 sofia_handle_sip_i_invite() IP 10.xx.xx.xx Rejected by acl "domains". Falling back to Digest auth. 2009-01-29 15:26:43 [NOTICE] switch_channel.c:565 switch_channel_set_name() New Channel sofia/internal/1001@10.xx.xx.xx [ac2988cf-008c-4bd2-9aea-7de3d328d7ff] 2009-01-29 15:26:43 [DEBUG] sofia.c:4311 sofia_handle_sip_i_invite() Setting NAT mode based on rfc1918 2009-01-29 15:26:43 [DEBUG] sofia.c:2542 sofia_handle_sip_i_state() Channel sofia/internal/1001@10.xx.xx.xx entering state [received] 2009-01-29 15:26:43 [DEBUG] sofia.c:2546 sofia_handle_sip_i_state() Remote SDP: v=0 o=root 866376124 866376124 IN IP4 10.xx.xx.xx s=call c=IN IP4 10.xx.xx.xx t=0 0 m=audio 54874 RTP/AVP 0 8 9 2 3 18 4 101 a=rtpmap:0 pcmu/8000 a=rtpmap:8 pcma/8000 a=rtpmap:9 g722/8000 a=rtpmap:2 g726-32/8000 a=rtpmap:3 gsm/8000 a=rtpmap:18 g729/8000 a=rtpmap:4 g723/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=crypto:1 AES_CM_128_HMAC_SHA1_32 inline:mbfUCh51dy9DGVqPTcOaY4IYILRQfwzVT7zyIo7j a=ptime:20 2009-01-29 15:26:43 [ERR] sofia_glue.c:2367 sofia_glue_negotiate_sdp() a=crypto in RTP/AVP, refer to rfc3711 2009-01-29 15:26:43 [NOTICE] sofia.c:2741 sofia_handle_sip_i_state() Hangup sofia/internal/1001@10.xx.xx.xx [CS_NEW] [INCOMPATIBLE_DESTINATION] 2009-01-29 15:26:43 [DEBUG] switch_channel.c:1494 switch_channel_perform_hangup() Send signal sofia/internal/1001@10.xx.xx.xx [KILL] 2009-01-29 15:26:43 [DEBUG] switch_core_session.c:807 switch_core_session_signal_state_change() Send signal sofia/internal/1001@10.xx.xx.xx [BREAK] 2009-01-29 15:26:43 [DEBUG] switch_core_state_machine.c:379 switch_core_session_run() (sofia/internal/1001@10.xx.xx.xx) Running State Change CS_HANGUP 2009-01-29 15:26:43 [DEBUG] switch_core_state_machine.c:410 switch_core_session_run() (sofia/internal/1001@10.xx.xx.xx) State HANGUP 2009-01-29 15:26:43 [DEBUG] mod_sofia.c:287 sofia_on_hangup() Channel sofia/internal/1001@10.xx.xx.xx hanging up, cause: INCOMPATIBLE_DESTINATION 2009-01-29 15:26:43 [DEBUG] mod_sofia.c:361 sofia_on_hangup() Responding to INVITE with: 488 2009-01-29 15:26:43 [DEBUG] switch_core_state_machine.c:46 switch_core_standard_on_hangup() sofia/internal/1001@10.xx.xx.xx Standard HANGUP, cause: INCOMPATIBLE_DESTINATION 2009-01-29 15:26:43 [DEBUG] switch_core_state_machine.c:410 switch_core_session_run() (sofia/internal/1001@10.xx.xx.xx) State HANGUP going to sleep 2009-01-29 15:26:43 [DEBUG] switch_core_session.c:939 switch_core_session_thread() Session 2 (sofia/internal/1001@10.xx.xx.xx) Locked, Waiting on external entities 2009-01-29 15:26:43 [NOTICE] switch_core_session.c:957 xswitch_core_session_thread() Session 2 (sofia/internal/1001@10.xx.xx.xx) Ended 2009-01-29 15:26:43 [NOTICE] switch_core_session.c:959 switch_core_session_thread() Close Channel sofia/internal/1001@10.xx.xx.xx [CS_HANGUP]
I just added a small section to the reporting bugs page on the wiki. It specifically talks about this subject: http://wiki.freeswitch.org/wiki/Reporting_Bugs#Upgrading_From_Older_Revision...
In simple terms, you are best to copy your configs to a safe location, then delete your /usr/src/freeswitch directory, then delete your fs source directory, and then do a fresh checkout & install. Personally, on Linux I like doing the "quick and dirty install": http://wiki.freeswitch.org/wiki/Quick_and_Dirty_Install
After your fresh install is complete, go back and make your customizations, like editing the modules.conf and modules.conf.xml, installing openzap, etc. Then test and report back. -MC
On Wed, Jan 28, 2009 at 8:23 AM, <curly2009@gmx.de> wrote:
no I don't have try it.
I have to execute "make current" in the Freeswitch source directory, or something else?
-------- Original-Nachricht --------
Datum: Wed, 28 Jan 2009 10:11:36 -0600 Von: Brian West <brian@freeswitch.org> An: freeswitch-users@lists.freeswitch.org Betreff: Re: [Freeswitch-users] Can\'t dial over openzap
Have you tried with the latest FreeSWITCH Trunk?
/b
On Jan 28, 2009, at 10:01 AM, curly2009@gmx.de wrote:
It's ISDN PRI. Digium Wildcard TE110P
I don't edit tones.conf. I leave this to the defaults.
I using freeswitch-1.0.1 zaptel-1.4.12
I posted the whole log of the call in pastebin.freeswitch.org.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
-- NUR NOCH BIS 31.01.! GMX FreeDSL - Telefonanschluss + DSL für nur 16,37 EURO/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K11308T4569a
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger
Snom filed a bug with us that we should not accept a=crypto in the RTP/ AVP as it is an rfc violation but left their defaults to still send that. Please file a complaint with snom that their default are not right. There is a setting to change it but I can not recall what it is. Mike On Jan 29, 2009, at 9:42 AM, curly2009@gmx.de wrote:
2009-01-29 15:26:43 [ERR] sofia_glue.c:2367 sofia_glue_negotiate_sdp() a=crypto in RTP/AVP, refer to rfc3711
You go to the identity under "RTP/SAVP:" and change it to optional /b On Jan 29, 2009, at 9:19 AM, Michael Jerris wrote:
Snom filed a bug with us that we should not accept a=crypto in the RTP/ AVP as it is an rfc violation but left their defaults to still send that. Please file a complaint with snom that their default are not right. There is a setting to change it but I can not recall what it is.
Mike
Thanks... it works!
You go to the identity under "RTP/SAVP:" and change it to optional
/b
On Jan 29, 2009, at 9:19 AM, Michael Jerris wrote:
Snom filed a bug with us that we should not accept a=crypto in the RTP/ AVP as it is an rfc violation but left their defaults to still send that. Please file a complaint with snom that their default are not right. There is a setting to change it but I can not recall what it is.
Mike
-- NUR NOCH BIS 31.01.! GMX FreeDSL - Telefonanschluss + DSL für nur 16,37 EURO/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K11308T4569a
participants (6)
-
"Franziska Röhler"
-
Anthony Minessale
-
Brian West
-
curly2009＠gmx.de
-
Michael Collins
-
Michael Jerris