ATA-answering machine question/recommendation
I have an application that requires answering machine detection. I have not been able to locate any documentation indicating that there is explicit support for answering machine detection. I have received recommendations on call flows that would include DTMF entry by the called party to detect by implication answering machines, however, I need an explicit methodology. My question is, does anyone have any experience with ATAs that might have this capability. I am interested in any solution that might even include Avaya, Cisco, or other hardware device interfaced with Freeswitch that would provide an explicit answering machine detection capability. Jonathan
Hi Jonathan, Mod_vmd (voicemail detection) should do the trick. Just search the wiki for mod_vmd, there are a number of ways of using it. Sent from my BlackBerry device on the Rogers Wireless Network -----Original Message----- From: jonathan augenstine <jaugenstine@gmail.com> Date: Wed, 21 Jan 2009 06:53:41 To: <freeswitch-users@lists.freeswitch.org> Subject: [Freeswitch-users] ATA-answering machine question/recommendation _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi all, On my existing Freeswitch 1.0.2, I installed and configured mod_vmd as below: make mod_vmd-install Then configured it as on wiki page: http://wiki.freeswitch.org/wiki/Mod_vmd After that my dialplan terminates call to another system, where it is just answered and wait for some time there. So that there should be a variable called vmd_detect must be created as shown in dialplan http://wiki.freeswitch.org/wiki/Mod_vmd#From_Dialplan. But eventhough no variable named 'vmd_detect' is created after that.!!! Is there i am missing something? Is there another way of using mod_vmd? Thanks in advance. msp Lucas Cornelisse wrote:
Hi Jonathan,
Mod_vmd (voicemail detection) should do the trick.
Just search the wiki for mod_vmd, there are a number of ways of using it.
Sent from my BlackBerry device on the Rogers Wireless Network
-----Original Message----- From: jonathan augenstine <jaugenstine@gmail.com>
Date: Wed, 21 Jan 2009 06:53:41 To: <freeswitch-users@lists.freeswitch.org> Subject: [Freeswitch-users] ATA-answering machine question/recommendation
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- View this message in context: http://www.nabble.com/ATA-answering-machine-question-recommendation-tp215847... Sent from the Freeswitch-users mailing list archive at Nabble.com.
Did you ever post your dialplan and a debug trace of a call to the pastebin? If not, please do so and we will check it out. -MC On Sat, Jan 24, 2009 at 5:47 AM, shehzad p <pmhshz@gmail.com> wrote:
Hi all,
On my existing Freeswitch 1.0.2, I installed and configured mod_vmd as below: make mod_vmd-install
Then configured it as on wiki page: http://wiki.freeswitch.org/wiki/Mod_vmd
After that my dialplan terminates call to another system, where it is just answered and wait for some time there. So that there should be a variable called vmd_detect must be created as shown in dialplan http://wiki.freeswitch.org/wiki/Mod_vmd#From_Dialplan.
But eventhough no variable named 'vmd_detect' is created after that.!!! Is there i am missing something? Is there another way of using mod_vmd?
Thanks in advance. msp
Lucas Cornelisse wrote:
Hi Jonathan,
Mod_vmd (voicemail detection) should do the trick.
Just search the wiki for mod_vmd, there are a number of ways of using it.
Sent from my BlackBerry device on the Rogers Wireless Network
-----Original Message----- From: jonathan augenstine <jaugenstine@gmail.com>
Date: Wed, 21 Jan 2009 06:53:41 To: <freeswitch-users@lists.freeswitch.org> Subject: [Freeswitch-users] ATA-answering machine question/recommendation
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- View this message in context: http://www.nabble.com/ATA-answering-machine-question-recommendation-tp215847... Sent from the Freeswitch-users mailing list archive at Nabble.com.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi Michael, My dial plan is: ======================== <extension name="my_vmdtest"> <condition field="destination_number" expression="^1200$"> <action application="info"/> <action application="vmd"/> <action application="bridge" data="sofia/external/1111@xxx.xxx.xxx.x"/> <action application="info"/> <!-- Look for chan var "vmd_detect" here --> <action application="hangup"/> </condition> </extension> ==================================== When call come to xxx.xxx.xxx.x system, It answer the call and only wait for 20 seconds (NO playback only wait) and hangup. Please find debug trace for above dialplan on http://pastebin.freeswitch.org/6919 Again I also tested dialplan exact same as shown in the wiki page http://wiki.freeswitch.org/wiki/Mod_vmd#From_Dialplan. But there it is not working as needed. Thanks for your response... msp Michael Collins-11 wrote:
Did you ever post your dialplan and a debug trace of a call to the pastebin? If not, please do so and we will check it out. -MC
On Sat, Jan 24, 2009 at 5:47 AM, shehzad p <pmhshz@gmail.com> wrote:
Hi all,
On my existing Freeswitch 1.0.2, I installed and configured mod_vmd as below: make mod_vmd-install
Then configured it as on wiki page: http://wiki.freeswitch.org/wiki/Mod_vmd
After that my dialplan terminates call to another system, where it is just answered and wait for some time there. So that there should be a variable called vmd_detect must be created as shown in dialplan http://wiki.freeswitch.org/wiki/Mod_vmd#From_Dialplan.
But eventhough no variable named 'vmd_detect' is created after that.!!! Is there i am missing something? Is there another way of using mod_vmd?
Thanks in advance. msp
Lucas Cornelisse wrote:
Hi Jonathan,
Mod_vmd (voicemail detection) should do the trick.
Just search the wiki for mod_vmd, there are a number of ways of using it.
Sent from my BlackBerry device on the Rogers Wireless Network
-----Original Message----- From: jonathan augenstine <jaugenstine@gmail.com>
Date: Wed, 21 Jan 2009 06:53:41 To: <freeswitch-users@lists.freeswitch.org> Subject: [Freeswitch-users] ATA-answering machine question/recommendation
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- View this message in context: http://www.nabble.com/ATA-answering-machine-question-recommendation-tp215847... Sent from the Freeswitch-users mailing list archive at Nabble.com.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- View this message in context: http://www.nabble.com/ATA-answering-machine-question-recommendation-tp215847... Sent from the Freeswitch-users mailing list archive at Nabble.com.
I'm not too sure about this one. I see it calling mod_vmd and complaining about needing media. Let's see what Eric Des Courtis has to say on this one. Hold tight please... -MC On Mon, Jan 26, 2009 at 11:40 PM, shehzad p <pmhshz@gmail.com> wrote:
Hi Michael,
My dial plan is: ======================== <extension name="my_vmdtest"> <condition field="destination_number" expression="^1200$"> <action application="info"/> <action application="vmd"/> <action application="bridge" data="sofia/external/1111@xxx.xxx.xxx.x"/> <action application="info"/> <!-- Look for chan var "vmd_detect" here --> <action application="hangup"/> </condition> </extension> ==================================== When call come to xxx.xxx.xxx.x system, It answer the call and only wait for 20 seconds (NO playback only wait) and hangup. Please find debug trace for above dialplan on http://pastebin.freeswitch.org/6919
Again I also tested dialplan exact same as shown in the wiki page http://wiki.freeswitch.org/wiki/Mod_vmd#From_Dialplan. But there it is not working as needed.
Thanks for your response... msp
Michael Collins-11 wrote:
Did you ever post your dialplan and a debug trace of a call to the pastebin? If not, please do so and we will check it out. -MC
On Sat, Jan 24, 2009 at 5:47 AM, shehzad p <pmhshz@gmail.com> wrote:
Hi all,
On my existing Freeswitch 1.0.2, I installed and configured mod_vmd as below: make mod_vmd-install
Then configured it as on wiki page: http://wiki.freeswitch.org/wiki/Mod_vmd
After that my dialplan terminates call to another system, where it is just answered and wait for some time there. So that there should be a variable called vmd_detect must be created as shown in dialplan http://wiki.freeswitch.org/wiki/Mod_vmd#From_Dialplan.
But eventhough no variable named 'vmd_detect' is created after that.!!! Is there i am missing something? Is there another way of using mod_vmd?
Thanks in advance. msp
Lucas Cornelisse wrote:
Hi Jonathan,
Mod_vmd (voicemail detection) should do the trick.
Just search the wiki for mod_vmd, there are a number of ways of using it.
Sent from my BlackBerry device on the Rogers Wireless Network
-----Original Message----- From: jonathan augenstine <jaugenstine@gmail.com>
Date: Wed, 21 Jan 2009 06:53:41 To: <freeswitch-users@lists.freeswitch.org> Subject: [Freeswitch-users] ATA-answering machine question/recommendation
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- View this message in context: http://www.nabble.com/ATA-answering-machine-question-recommendation-tp215847... Sent from the Freeswitch-users mailing list archive at Nabble.com.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- View this message in context: http://www.nabble.com/ATA-answering-machine-question-recommendation-tp215847... Sent from the Freeswitch-users mailing list archive at Nabble.com.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
is there any configuration required in profile or somewhere else... or is it bug... thanks msp Michael Collins-11 wrote:
I'm not too sure about this one. I see it calling mod_vmd and complaining about needing media. Let's see what Eric Des Courtis has to say on this one. Hold tight please...
-MC
On Mon, Jan 26, 2009 at 11:40 PM, shehzad p <pmhshz@gmail.com> wrote:
Hi Michael,
My dial plan is: ======================== <extension name="my_vmdtest"> <condition field="destination_number" expression="^1200$"> <action application="info"/> <action application="vmd"/> <action application="bridge" data="sofia/external/1111@xxx.xxx.xxx.x"/> <action application="info"/> <!-- Look for chan var "vmd_detect" here --> <action application="hangup"/> </condition> </extension> ==================================== When call come to xxx.xxx.xxx.x system, It answer the call and only wait for 20 seconds (NO playback only wait) and hangup. Please find debug trace for above dialplan on http://pastebin.freeswitch.org/6919
Again I also tested dialplan exact same as shown in the wiki page http://wiki.freeswitch.org/wiki/Mod_vmd#From_Dialplan. But there it is not working as needed.
Thanks for your response... msp
Michael Collins-11 wrote:
Did you ever post your dialplan and a debug trace of a call to the pastebin? If not, please do so and we will check it out. -MC
On Sat, Jan 24, 2009 at 5:47 AM, shehzad p <pmhshz@gmail.com> wrote:
Hi all,
On my existing Freeswitch 1.0.2, I installed and configured mod_vmd as below: make mod_vmd-install
Then configured it as on wiki page: http://wiki.freeswitch.org/wiki/Mod_vmd
After that my dialplan terminates call to another system, where it is just answered and wait for some time there. So that there should be a variable called vmd_detect must be created as shown in dialplan http://wiki.freeswitch.org/wiki/Mod_vmd#From_Dialplan.
But eventhough no variable named 'vmd_detect' is created after that.!!! Is there i am missing something? Is there another way of using mod_vmd?
Thanks in advance. msp
Lucas Cornelisse wrote:
Hi Jonathan,
Mod_vmd (voicemail detection) should do the trick.
Just search the wiki for mod_vmd, there are a number of ways of using it.
Sent from my BlackBerry device on the Rogers Wireless Network
-----Original Message----- From: jonathan augenstine <jaugenstine@gmail.com>
Date: Wed, 21 Jan 2009 06:53:41 To: <freeswitch-users@lists.freeswitch.org> Subject: [Freeswitch-users] ATA-answering machine question/recommendation
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- View this message in context: http://www.nabble.com/ATA-answering-machine-question-recommendation-tp215847... Sent from the Freeswitch-users mailing list archive at Nabble.com.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- View this message in context: http://www.nabble.com/ATA-answering-machine-question-recommendation-tp215847... Sent from the Freeswitch-users mailing list archive at Nabble.com.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- View this message in context: http://www.nabble.com/ATA-answering-machine-question-recommendation-tp215847... Sent from the Freeswitch-users mailing list archive at Nabble.com.
participants (4)
-
jonathan augenstine
-
lucas＠johnnyvoip.com
-
Michael Collins
-
shehzad p