The wiki writes: Applications that are allowed to be run *inline* are: ... * sleep <http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_sleep> ... But the log shows: ... Dialplan: loopback/ResCont6507800-b Action sleep(2000) INLINE 2012-02-25 15:29:52.107985 [ERR] mod_dialplan_xml.c:69 This application cannot be executed inline ... -HC
Looks more like bad documentation then a Bug... So I would suggest fixing the Wiki Also, this serves as a Point of reminder to everyone please do not post bugs to the mailing list... They will not get attention here... Post them to Jira that¹s where the belong... See http://wiki.freeswitch.org/wiki/Reporting_Bugs and see http://lists.freeswitch.org/pipermail/freeswitch-users/2012-February/080458. html K On 2/25/12 3:34 PM, "Harry Coin" <hcoin@quietfountain.com> wrote:
The wiki writes:
Applications that are allowed to be run inline are: ...
* sleep <http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_sleep> ...
But the log shows: ... Dialplan: loopback/ResCont6507800-b Action sleep(2000) INLINE 2012-02-25 15:29:52.107985 [ERR] mod_dialplan_xml.c:69 This application cannot be executed inline ...
-HC
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
You should have listened to Ken. Now you typed 4 times as much to email the list and to open a Jira vs a few keystrokes to fix the wiki..... On Feb 25, 2012 5:19 PM, "Ken Rice" <krice@freeswitch.org> wrote:
Looks more like bad documentation then a Bug... So I would suggest fixing the Wiki
Also, this serves as a Point of reminder to everyone please do not post bugs to the mailing list... They will not get attention here... Post them to Jira that’s where the belong... See http://wiki.freeswitch.org/wiki/Reporting_Bugs and see http://lists.freeswitch.org/pipermail/freeswitch-users/2012-February/080458....
K
On 2/25/12 3:34 PM, "Harry Coin" <hcoin@quietfountain.com> wrote:
The wiki writes:
Applications that are allowed to be run *inline* are: ...
- sleep <http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_sleep>
...
But the log shows: ... Dialplan: loopback/ResCont6507800-b Action sleep(2000) INLINE 2012-02-25 15:29:52.107985 [ERR] mod_dialplan_xml.c:69 This application cannot be executed inline ...
-HC
------------------------------ _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On 2/25/2012 11:19 PM, Anthony Minessale wrote:
You should have listened to Ken. Now you typed 4 times as much to email the list and to open a Jira vs a few keystrokes to fix the wiki.....
Who am I or anyone new to know that the wiki wasn't correct and there is a bug in the software? Seems like a new fellow who reads the wiki to learn how this all works shouldn't just suppose because the software doesn't actually work that way the wiki was written that wiki is wrong. Anyhow I've dutifully opened a 'jira' as suggested. I generally recommend to folks new to a package to try out what might seem to be bugs first as reports on the user list, to see if it isn't some category misunderstanding or user mistake. That leads to less noise in the bug reports.
When the software clearly states you cant do that in an error message that's how you know... This is why I said it looks more like an error in the documentation... Then on the bug reporting, since you were trying to report a bug on the mailing list I pointed out to you and everyone else the proper way to report a bug as outline on the wiki and an Email I sent out not 2 weeks ago regarding such matters... Not to mention FreeSWITCH has an extensive mailing list history that's actively archived at several place and heavily indexed by google... K On 2/26/12 1:25 PM, "Harry Coin" <hcoin@quietfountain.com> wrote:
On 2/25/2012 11:19 PM, Anthony Minessale wrote:
You should have listened to Ken. Now you typed 4 times as much to email the list and to open a Jira vs a few keystrokes to fix the wiki.....
Who am I or anyone new to know that the wiki wasn't correct and there is a bug in the software? Seems like a new fellow who reads the wiki to learn how this all works shouldn't just suppose because the software doesn't actually work that way the wiki was written that wiki is wrong. Anyhow I've dutifully opened a 'jira' as suggested.
I generally recommend to folks new to a package to try out what might seem to be bugs first as reports on the user list, to see if it isn't some category misunderstanding or user mistake. That leads to less noise in the bug reports.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Am I correct in thinking that sleep cannot be executed inline because it is a "real" application, like it consumes audio. It does not just set a variable etc. ? Fixed the wiki. regards, Anita On Mon, Feb 27, 2012 at 1:06 AM, Ken Rice <krice@freeswitch.org> wrote:
When the software clearly states you cant do that in an error message that's how you know... This is why I said it looks more like an error in the documentation...
Then on the bug reporting, since you were trying to report a bug on the mailing list I pointed out to you and everyone else the proper way to report a bug as outline on the wiki and an Email I sent out not 2 weeks ago regarding such matters...
Not to mention FreeSWITCH has an extensive mailing list history that's actively archived at several place and heavily indexed by google...
K
On 2/26/12 1:25 PM, "Harry Coin" <hcoin@quietfountain.com> wrote:
On 2/25/2012 11:19 PM, Anthony Minessale wrote:
You should have listened to Ken. Now you typed 4 times as much to email the list and to open a Jira vs a few keystrokes to fix the
wiki.....
Who am I or anyone new to know that the wiki wasn't correct and there is a bug in the software? Seems like a new fellow who reads the wiki to learn how this all works shouldn't just suppose because the software doesn't actually work that way the wiki was written that wiki is wrong. Anyhow I've dutifully opened a 'jira' as suggested.
I generally recommend to folks new to a package to try out what might seem to be bugs first as reports on the user list, to see if it isn't some category misunderstanding or user mistake. That leads to less noise in the bug reports.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On 2/26/2012 1:36 PM, Ken Rice wrote:
When the software clearly states you cant do that in an error message that's how you know... This is why I said it looks more like an error in the documentation...
Kindly consider that your answer could as easily have been 'the precompiled freeswitch package you're using is out of date, the wiki is correct and the latest software reflects that'. I'm too new to have confidence enough in this package to be editing wikis for all to read.
Then on the bug reporting, since you were trying to report a bug on the mailing list I pointed out to you and everyone else the proper way to report a bug as outline on the wiki and an Email I sent out not 2 weeks ago regarding such matters...
Which advice I did follow, and thank you for it. The folk who have confidence enough in their knowledge of this package have already made due corrections and new folk like me in the future won't be misled by wrong documentation. I wasn't a member of this mailing list two weeks ago, nor was I confident enough in my knowledge of freeswitch to know whether what I saw was a bug worthy of reportage. It could have easily been me not doing something 'just obvious' to long time users. Just like I'm trying to decide whether a the choice of 'bypass_media=true / false' works when extensions access the dialplain, but 'true' there fails to dial out when that same dialplan is called via loopback is an understanding gap on my part or a bug.
Not to mention FreeSWITCH has an extensive mailing list history that's actively archived at several place and heavily indexed by google...
FWIW I did and do look first there. Maybe I should look for a 'freeswitch new users list', I don't mean to burden what appears to be a close knit community of long time users. Harry
On Sun, Feb 26, 2012 at 1:59 PM, Harry Coin <hcoin@quietfountain.com> wrote:
On 2/26/2012 1:36 PM, Ken Rice wrote:
When the software clearly states you cant do that in an error message that's how you know... This is why I said it looks more like an error in the documentation...
Kindly consider that your answer could as easily have been 'the precompiled freeswitch package you're using is out of date, the wiki is correct and the latest software reflects that'. I'm too new to have confidence enough in this package to be editing wikis for all to read.
I would actually say go more with what the software error messages are telling you... it clearly stated 'This application cannot be executed inline' also as most wikis they can be either just wrong or just out of date. FreeSWITCH is no different... the documentation generally lags the actual code by a bit...
Harry, this list is not meant to be a closed community for long time users. I believe most of us tries to help out as much as possible, for all kinds of users. However, we do get lots of bugreports to the list - which makes it really hard to follow, that's why we always want to have this in Jira instead. I this case the actual "bug" was in the documentation, and I think it would be more appropiate to send a question to the list if this is as intended or not (since you're a new user to FS), and not start by using the subject "Bug". If you're unsure of something, please send a question to the list. If you find a bug, please report it to Jira. /Peter ________________________________________ Från: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org] för Harry Coin [hcoin@quietfountain.com] Skickat: den 26 februari 2012 20:59 Till: FreeSWITCH Users Help Ämne: Re: [Freeswitch-users] Bug: sleep can't be called inline, contrary to doc On 2/26/2012 1:36 PM, Ken Rice wrote:
When the software clearly states you cant do that in an error message that's how you know... This is why I said it looks more like an error in the documentation...
Kindly consider that your answer could as easily have been 'the precompiled freeswitch package you're using is out of date, the wiki is correct and the latest software reflects that'. I'm too new to have confidence enough in this package to be editing wikis for all to read.
Then on the bug reporting, since you were trying to report a bug on the mailing list I pointed out to you and everyone else the proper way to report a bug as outline on the wiki and an Email I sent out not 2 weeks ago regarding such matters...
Which advice I did follow, and thank you for it. The folk who have confidence enough in their knowledge of this package have already made due corrections and new folk like me in the future won't be misled by wrong documentation. I wasn't a member of this mailing list two weeks ago, nor was I confident enough in my knowledge of freeswitch to know whether what I saw was a bug worthy of reportage. It could have easily been me not doing something 'just obvious' to long time users. Just like I'm trying to decide whether a the choice of 'bypass_media=true / false' works when extensions access the dialplain, but 'true' there fails to dial out when that same dialplan is called via loopback is an understanding gap on my part or a bug.
Not to mention FreeSWITCH has an extensive mailing list history that's actively archived at several place and heavily indexed by google...
FWIW I did and do look first there. Maybe I should look for a 'freeswitch new users list', I don't mean to burden what appears to be a close knit community of long time users. Harry
participants (5)
-
Anita Hall
-
Anthony Minessale
-
Harry Coin
-
Ken Rice
-
Peter Olsson