Hi Swapna, Are you trying to register the Cisco to the Freeswitch server? or the other way around. If the former check out the following documentation. http://www.cisco.com/en/US/docs/ios/12_3/sip/configuration/guide/chapter1.ht... sip-ua authentication username [INSERT_EXTENTION] password [INSERT_PASSWORD] registrar ipv4:[INERST_NAME_OF_FS_BOX]:5060 expires 3600 sip-server ipv4:[INERST_NAME_OF_FS_BOX]:5060 Regards, <http://www.cisco.com/en/US/docs/ios/12_3/sip/configuration/guide/chapter1.html#wp1182326> Craig. On 9 March 2010 23:47, srinivasula reddy <srinivas.ksvreddy@gmail.com>wrote:

Hi,

i have tried to configure gateway from my freeswitch, with the following credentials proxy(ip of cisco) and username,password. and when i start my freeswitch registration reqest is going to cisco router and again it requesting to same registration reqeust to my sipserver, the register packet from cisco router to my freeswitch is comming like this

To: sip:.*@sipserverip:5060

so there there is no user present with the name of .* it is rejecting the registration request, any idea

Thanks Swapna

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

-- Craig Askings Network Engineer | Over the Wire Pty Ltd craig@overthewire.com.au | www.overthewire.com.au Phone: 07 3847 9292 | Fax: 07 3847 9696 | Mobile: 0404 019 365