Hi Swapna,

Are you trying to register the Cisco to the Freeswitch server? or the other way around. If the former check out the following documentation.

http://www.cisco.com/en/US/docs/ios/12_3/sip/configuration/guide/chapter1.html#wp1182326

sip-ua
  authentication username [INSERT_EXTENTION] password [INSERT_PASSWORD]
  registrar ipv4:[INERST_NAME_OF_FS_BOX]:5060 expires 3600
  sip-server ipv4:[INERST_NAME_OF_FS_BOX]:5060

Regards,
Craig.

On 9 March 2010 23:47, srinivasula reddy <srinivas.ksvreddy@gmail.com> wrote:
Hi,
 
i have tried to configure gateway from my freeswitch, with the following credentials proxy(ip of cisco) and username,password.
and when i start my freeswitch registration reqest is going to cisco router and again it requesting to same registration reqeust to my sipserver, the register packet from cisco router to my freeswitch is comming like this
 
To: sip:.*@sipserverip:5060
 
so there there is no user present with the name of .* it is rejecting the registration request, any idea

Thanks
Swapna

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org




--
Craig Askings

Network Engineer | Over the Wire Pty Ltd
craig@overthewire.com.au | www.overthewire.com.au
Phone: 07 3847 9292 | Fax: 07 3847 9696 | Mobile: 0404 019 365