freetdm RBS configuration for multi-port cards
Have an issue for freetdm experts: 1. I have it working with one port but what is the proper syntax for multiple Sangoma RBS T1 ports in freetdm.conf and freetdm.conf.xml? The installation scripts wancfg_fs and wancfg_dahdi put them in the PRI type notation and cannot find how to rework for multiple RBS. Here is a working stripped down to only one port. This is after going through script and only setting one port as used. Current: freetdm.conf [span zt wp1] trunk_type => EM em-channel => 1-24 freetdm.conf.xml <configuration name="freetdm.conf" description="Freetdm Configuration"> <settings> <param name="debug" value="0"/> <!--<param name="hold-music" value="$${moh_uri}"/>--> <!--<param name="enable-analog-option" value="call-swap"/>--> <!--<param name="enable-analog-option" value="3-way"/>--> </settings> <analog_em_spans> <span name="wp1"> <param name="dialplan" value="XML"/> <param name="context" value="public"/> </span> </analog_em_spans> </configuration> Thanks for looking and helping if you can! Brian C. Edgar, Jr.
On Fri, Apr 19, 2013 at 5:45 PM, <bedgar@vseinc.com> wrote:
Have an issue for freetdm experts:****
** **
**1. **I have it working with one port but what is the proper syntax for multiple Sangoma RBS T1 ports in freetdm.conf and freetdm.conf.xml? The installation scripts wancfg_fs and wancfg_dahdi put them in the PRI type notation and cannot find how to rework for multiple RBS. Here is a working stripped down to only one port. This is after going through script and only setting one port as used.
Take a look at the wiki documentation: http://wiki.freeswitch.org/wiki/FreeTDM#DAHDI_mode You just need to keep increasing the channel number for the second span, then configure a second <span> in the XML *Moises Silva **Manager, Software Engineering*** msilva@sangoma.com Sangoma Technologies 100 Renfrew Drive, Suite 100, Markham, ON L3R 9R6 Canada t. +1 800 388 2475 (N. America) t. +1 905 474 1990 x128 f. +1 905 474 9223 **<http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email+signatures> Products<http://sangoma.com/products?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Solutions<http://sangoma.com/solutions?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Events<http://sangoma.com/about_us/events?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Contact<http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Wiki<http://wiki.sangoma.com/?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Facebook<http://www.facebook.com/pages/Sangoma-VoIP-Cards/43578453335?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Twitter<http://www.twitter.com/sangoma?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>`| | YouTube<http://www.youtube.com/sangomatechnologies?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>
Moises, Thanks for the reply. I did do that and FS core dumped when I cycled loopback in my mux on several T1’s so I thought that I had some configuration errors. I am using 2x4 port Sangoma PCI-Express cards. We may have to investigate mod_freetdm from the recent development effort we invested in. We are using: FreeSWITCH Version 1.2.8+git~20130410T033224Z~8dd4c8f9f1 (git 8dd4c8f 2013-04-10 03:32:24Z) Regards, Brian C. Edgar, Jr. From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Moises Silva Sent: Saturday, April 20, 2013 2:53 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] freetdm RBS configuration for multi-port cards On Fri, Apr 19, 2013 at 5:45 PM, <bedgar@vseinc.com<mailto:bedgar@vseinc.com>> wrote: Have an issue for freetdm experts: 1. I have it working with one port but what is the proper syntax for multiple Sangoma RBS T1 ports in freetdm.conf and freetdm.conf.xml? The installation scripts wancfg_fs and wancfg_dahdi put them in the PRI type notation and cannot find how to rework for multiple RBS. Here is a working stripped down to only one port. This is after going through script and only setting one port as used. Take a look at the wiki documentation: http://wiki.freeswitch.org/wiki/FreeTDM#DAHDI_mode You just need to keep increasing the channel number for the second span, then configure a second <span> in the XML Moises Silva Manager, Software Engineering msilva@sangoma.com<mailto:msilva@sangoma.com> Sangoma Technologies 100 Renfrew Drive, Suite 100, Markham, ON L3R 9R6 Canada t. +1 800 388 2475 (N. America) t. +1 905 474 1990 x128 f. +1 905 474 9223 <http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email+signatures> Products | Solutions | Events | Contact | Wiki | Facebook | Twitter`| | YouTube<http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email+signatures> <http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email+signatures>
On Sat, Apr 20, 2013 at 5:30 PM, <bedgar@vseinc.com> wrote:
Moises,****
** **
Thanks for the reply. I did do that and FS core dumped when I cycled loopback in my mux on several T1’s so I thought that I had some configuration errors. I am using 2x4 port Sangoma PCI-Express cards. We may have to investigate mod_freetdm from the recent development effort we invested in.****
** **
We are using:****
** **
FreeSWITCH Version 1.2.8+git~20130410T033224Z~8dd4c8f9f1 (git 8dd4c8f 2013-04-10 03:32:24Z)
A core dump is never acceptable regardless of whether there is any configuration error. If you can reproduce the core dump follow instructions here to report the bug: http://wiki.freeswitch.org/wiki/Reporting_Bugs Assign the bug to me. *Moises Silva **Manager, Software Engineering*** msilva@sangoma.com Sangoma Technologies 100 Renfrew Drive, Suite 100, Markham, ON L3R 9R6 Canada t. +1 800 388 2475 (N. America) t. +1 905 474 1990 x128 f. +1 905 474 9223 **<http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email+signatures> Products<http://sangoma.com/products?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Solutions<http://sangoma.com/solutions?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Events<http://sangoma.com/about_us/events?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Contact<http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Wiki<http://wiki.sangoma.com/?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Facebook<http://www.facebook.com/pages/Sangoma-VoIP-Cards/43578453335?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Twitter<http://www.twitter.com/sangoma?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>`| | YouTube<http://www.youtube.com/sangomatechnologies?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>
Moises, Thank you. I will reproduce the core dump and will post and assign as requested. Regards, Brian C. Edgar, Jr. From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Moises Silva Sent: Saturday, April 20, 2013 8:14 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] freetdm RBS configuration for multi-port cards On Sat, Apr 20, 2013 at 5:30 PM, <bedgar@vseinc.com<mailto:bedgar@vseinc.com>> wrote: Moises, Thanks for the reply. I did do that and FS core dumped when I cycled loopback in my mux on several T1’s so I thought that I had some configuration errors. I am using 2x4 port Sangoma PCI-Express cards. We may have to investigate mod_freetdm from the recent development effort we invested in. We are using: FreeSWITCH Version 1.2.8+git~20130410T033224Z~8dd4c8f9f1 (git 8dd4c8f 2013-04-10 03:32:24Z) A core dump is never acceptable regardless of whether there is any configuration error. If you can reproduce the core dump follow instructions here to report the bug: http://wiki.freeswitch.org/wiki/Reporting_Bugs Assign the bug to me. Moises Silva Manager, Software Engineering msilva@sangoma.com<mailto:msilva@sangoma.com> Sangoma Technologies 100 Renfrew Drive, Suite 100, Markham, ON L3R 9R6 Canada t. +1 800 388 2475 (N. America) t. +1 905 474 1990 x128 f. +1 905 474 9223 <http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email+signatures> Products | Solutions | Events | Contact | Wiki | Facebook | Twitter`| | YouTube<http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email+signatures> <http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email+signatures>
Moises, I recreated the core dump and opened the Jira as you requested. Thank you, Brian From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Brian Edgar Sent: Saturday, April 20, 2013 9:49 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] freetdm RBS configuration for multi-port cards Moises, Thank you. I will reproduce the core dump and will post and assign as requested. Regards, Brian C. Edgar, Jr. From: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Moises Silva Sent: Saturday, April 20, 2013 8:14 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] freetdm RBS configuration for multi-port cards On Sat, Apr 20, 2013 at 5:30 PM, <bedgar@vseinc.com<mailto:bedgar@vseinc.com>> wrote: Moises, Thanks for the reply. I did do that and FS core dumped when I cycled loopback in my mux on several T1’s so I thought that I had some configuration errors. I am using 2x4 port Sangoma PCI-Express cards. We may have to investigate mod_freetdm from the recent development effort we invested in. We are using: FreeSWITCH Version 1.2.8+git~20130410T033224Z~8dd4c8f9f1 (git 8dd4c8f 2013-04-10 03:32:24Z) A core dump is never acceptable regardless of whether there is any configuration error. If you can reproduce the core dump follow instructions here to report the bug: http://wiki.freeswitch.org/wiki/Reporting_Bugs Assign the bug to me. Moises Silva Manager, Software Engineering msilva@sangoma.com<mailto:msilva@sangoma.com> Sangoma Technologies 100 Renfrew Drive, Suite 100, Markham, ON L3R 9R6 Canada t. +1 800 388 2475 (N. America) t. +1 905 474 1990 x128 f. +1 905 474 9223 Products | Solutions | Events | Contact | Wiki | Facebook | Twitter`| | YouTube<http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email+signatures>
participants (2)
-
bedgar＠vseinc.com
-
Moises Silva