Moises,

Thanks for the reply. I did do that and FS core dumped when I cycled loopback in my mux on several T1’s so I thought that I had some configuration errors. I am using 2x4 port Sangoma PCI-Express cards. We may have to investigate mod_freetdm from the recent development effort we invested in.

We are using:

FreeSWITCH Version 1.2.8+git~20130410T033224Z~8dd4c8f9f1 (git 8dd4c8f 2013-04-10 03:32:24Z)

Regards,

Brian C. Edgar, Jr.

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Moises Silva
Sent: Saturday, April 20, 2013 2:53 PM
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] freetdm RBS configuration for multi-port cards

On Fri, Apr 19, 2013 at 5:45 PM, <bedgar@vseinc.com> wrote:

Have an issue for freetdm experts:

1. I have it working with one port but what is the proper syntax for multiple Sangoma RBS T1 ports in freetdm.conf and freetdm.conf.xml? The installation scripts wancfg_fs and wancfg_dahdi put them in the PRI type notation and cannot find how to rework for multiple RBS. Here is a working stripped down to only one port. This is after going through script and only setting one port as used.

Take a look at the wiki documentation: http://wiki.freeswitch.org/wiki/FreeTDM#DAHDI_mode

You just need to keep increasing the channel number for the second span, then configure a second <span> in the XML

Moises Silva
Manager, Software Engineering

msilva@sangoma.com

Sangoma Technologies

100 Renfrew Drive, Suite 100, Markham, ON L3R 9R6 Canada

t. +1 800 388 2475 (N. America)

t. +1 905 474 1990 x128

f. +1 905 474 9223