Hello ALL, I installed FWS 1.0.7 + Sangoma A104D CentOS 5.5 wanpipe-3.5.18 libsng_isdn-7.0.0.x86_64. When I try call from outside, I see such messages freeswitch@internal> 2011-01-26 17:59:44.501244 [INFO] ftmod_sangoma_isdn_stack_rcv.c:75 [s1c1][1:1] Received SETUP (suId:1 suInstId:0 spInstId:35) 2011-01-26 17:59:44.501244 [INFO] ftmod_sangoma_isdn_trace.c:223 [SNGISDN Q931] wp1 FRAME INCOMING: Prot Disc:Q.931/I.451 (0x08) Call Ref:1136 (Originating side) Type:SETUP (0x5) Bearer Capability:Coding:ITU-T(0) TransferCap:Speech(0) TransferRate:64 Kbit/s(16) L1Prot:G.711 A-Law(3) Channel Id:No:1 Type:B-chans(3) Preferred/Implicit Calling Party Number:495XXXXXXX(l:10) plan:isdn(1) type:national(2)scr:network, provided(3) pres:allowed(0) Called Party Number:XXXXXXX(l:7) plan:isdn(1) type:national(2) Sending complete: [ 08 02 11 36 05 04 03 80 90 a3 18 03 a1 83 81 6c 0c 21 83 34 39 35 37 38 39 33 35 39 31 70 08 a1 32 38 37 38 37 38 36 a1 00 ] 2011-01-26 17:59:44.501244 [DEBUG] ftmod_sangoma_isdn_stack_hndl.c:57 [s1c1][1:1] Processing SETUP (suId:1 suInstId:0 spInstId:35) 2011-01-26 17:59:44.501244 [WARNING] ftdm_io.c:1789 [s1c1][1:1] Cannot open channel when is alarmed 2011-01-26 17:59:44.501244 [INFO] ftmod_sangoma_isdn_stack_hndl.c:64 [s1c1][1:1] Received SETUP but channel is in USE, saving call for later processing 2011-01-26 17:59:48.501214 [INFO] ftmod_sangoma_isdn_trace.c:223 [SNGISDN Q931] wp1 FRAME INCOMING: Prot Disc:Q.931/I.451 (0x08) Call Ref:1136 (Originating side) Type:SETUP (0x5) Bearer Capability:Coding:ITU-T(0) TransferCap:Speech(0) TransferRate:64 Kbit/s(16) L1Prot:G.711 A-Law(3) Channel Id:No:1 Type:B-chans(3) Preferred/Implicit Calling Party Number:495XXXXXXX(l:10) plan:isdn(1) type:national(2)scr:network, provided(3) pres:allowed(0) Called Party Number:XXXXXXX(l:7) plan:isdn(1) type:national(2) Sending complete: [ 08 02 11 36 05 04 03 80 90 a3 18 03 a1 83 81 6c 0c 21 83 34 39 35 37 38 39 33 35 39 31 70 08 a1 32 38 37 38 37 38 36 a1 00 ] 2011-01-26 17:59:48.501214 [WARNING] ftmod_sangoma_isdn_stack_rcv.c:760 [SNGISDN Q931] s1: Protocol: Unknown Event Code(2): Incomp Msg(276) 2011-01-26 17:59:52.547185 [INFO] ftmod_sangoma_isdn_stack_rcv.c:245 [s1c1][1:1] Received RELEASE/RELEASE COMPLETE (suId:1 suInstId:0 spInstId:35) 2011-01-26 17:59:52.547185 [INFO] ftmod_sangoma_isdn_trace.c:223 [SNGISDN Q931] wp1 FRAME INCOMING: Prot Disc:Q.931/I.451 (0x08) Call Ref:1136 (Originating side) Type:RELEASE COMPLETE (0x5a) Cause:coding:ITU-T(0) location:User(0) val:Recovery on timer expired(102) Timer T [ 08 02 11 36 5a 08 02 80 e6 00 ] 2011-01-26 17:59:52.547185 [DEBUG] ftmod_sangoma_isdn_stack_hndl.c:578 [s1c1][1:1] Processing RELEASE/RELEASE COMPLETE (suId:1 suInstId:0 spInstId:35) 2011-01-26 17:59:52.547185 [DEBUG] ftmod_sangoma_isdn_support.c:73 [s1c1][1:1] Clearing glare data (suId:1 suInstId:0 spInstId:35 actv-suInstId:0 actv-spInstId:0) I check freetdm.conf and freetdm.conf.xml it seem like correct, but freeswitch@internal> ftdm list +OK span: 1 (wp1) type: Sangoma (ISDN) physical_status: alarmed signaling_status: UP chan_count: 31 dialplan: XML context: public dial_regex: fail_dial_regex: hold_music: analog_options none Maybe anybody know about such problem? -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/Sangoma-A104D-tp5962992p596299... Sent from the freeswitch-users mailing list archive at Nabble.com.
Hi vik_kom, We are looking into this and will get back to you. David, *David Yat Sin, BEng* */Senior Software Engineer/* Sangoma Technologies 100 Renfrew Drive, Suite 100, Markham, ON L3R 9R6 Canada t. +1 800 388 2475 x119 t. +1 905 474 1990 x119 f. +1 905 474 9223 Description: SANGOMA <http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> Products <http://sangoma.com/products?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Solutions <http://sangoma.com/solutions?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Events <http://sangoma.com/about_us/events?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Contact <http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Wiki <http://wiki.sangoma.com/?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Facebook <http://www.facebook.com/pages/Sangoma-VoIP-Cards/43578453335?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Twitter <http://www.twitter.com/sangoma?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> On 1/26/2011 10:14 AM, vik_kom wrote:
Hello ALL, I installed FWS 1.0.7 + Sangoma A104D CentOS 5.5 wanpipe-3.5.18 libsng_isdn-7.0.0.x86_64. When I try call from outside, I see such messages
freeswitch@internal> 2011-01-26 17:59:44.501244 [INFO] ftmod_sangoma_isdn_stack_rcv.c:75 [s1c1][1:1] Received SETUP (suId:1 suInstId:0 spInstId:35) 2011-01-26 17:59:44.501244 [INFO] ftmod_sangoma_isdn_trace.c:223 [SNGISDN Q931] wp1 FRAME INCOMING: Prot Disc:Q.931/I.451 (0x08) Call Ref:1136 (Originating side) Type:SETUP (0x5) Bearer Capability:Coding:ITU-T(0) TransferCap:Speech(0) TransferRate:64 Kbit/s(16) L1Prot:G.711 A-Law(3) Channel Id:No:1 Type:B-chans(3) Preferred/Implicit Calling Party Number:495XXXXXXX(l:10) plan:isdn(1) type:national(2)scr:network, provided(3) pres:allowed(0) Called Party Number:XXXXXXX(l:7) plan:isdn(1) type:national(2) Sending complete: [ 08 02 11 36 05 04 03 80 90 a3 18 03 a1 83 81 6c 0c 21 83 34 39 35 37 38 39 33 35 39 31 70 08 a1 32 38 37 38 37 38 36 a1 00 ]
2011-01-26 17:59:44.501244 [DEBUG] ftmod_sangoma_isdn_stack_hndl.c:57 [s1c1][1:1] Processing SETUP (suId:1 suInstId:0 spInstId:35) 2011-01-26 17:59:44.501244 [WARNING] ftdm_io.c:1789 [s1c1][1:1] Cannot open channel when is alarmed 2011-01-26 17:59:44.501244 [INFO] ftmod_sangoma_isdn_stack_hndl.c:64 [s1c1][1:1] Received SETUP but channel is in USE, saving call for later processing 2011-01-26 17:59:48.501214 [INFO] ftmod_sangoma_isdn_trace.c:223 [SNGISDN Q931] wp1 FRAME INCOMING: Prot Disc:Q.931/I.451 (0x08) Call Ref:1136 (Originating side) Type:SETUP (0x5) Bearer Capability:Coding:ITU-T(0) TransferCap:Speech(0) TransferRate:64 Kbit/s(16) L1Prot:G.711 A-Law(3) Channel Id:No:1 Type:B-chans(3) Preferred/Implicit Calling Party Number:495XXXXXXX(l:10) plan:isdn(1) type:national(2)scr:network, provided(3) pres:allowed(0) Called Party Number:XXXXXXX(l:7) plan:isdn(1) type:national(2) Sending complete: [ 08 02 11 36 05 04 03 80 90 a3 18 03 a1 83 81 6c 0c 21 83 34 39 35 37 38 39 33 35 39 31 70 08 a1 32 38 37 38 37 38 36 a1 00 ]
2011-01-26 17:59:48.501214 [WARNING] ftmod_sangoma_isdn_stack_rcv.c:760 [SNGISDN Q931] s1: Protocol: Unknown Event Code(2): Incomp Msg(276) 2011-01-26 17:59:52.547185 [INFO] ftmod_sangoma_isdn_stack_rcv.c:245 [s1c1][1:1] Received RELEASE/RELEASE COMPLETE (suId:1 suInstId:0 spInstId:35) 2011-01-26 17:59:52.547185 [INFO] ftmod_sangoma_isdn_trace.c:223 [SNGISDN Q931] wp1 FRAME INCOMING: Prot Disc:Q.931/I.451 (0x08) Call Ref:1136 (Originating side) Type:RELEASE COMPLETE (0x5a) Cause:coding:ITU-T(0) location:User(0) val:Recovery on timer expired(102) Timer T [ 08 02 11 36 5a 08 02 80 e6 00 ]
2011-01-26 17:59:52.547185 [DEBUG] ftmod_sangoma_isdn_stack_hndl.c:578 [s1c1][1:1] Processing RELEASE/RELEASE COMPLETE (suId:1 suInstId:0 spInstId:35) 2011-01-26 17:59:52.547185 [DEBUG] ftmod_sangoma_isdn_support.c:73 [s1c1][1:1] Clearing glare data (suId:1 suInstId:0 spInstId:35 actv-suInstId:0 actv-spInstId:0)
I check freetdm.conf and freetdm.conf.xml it seem like correct, but freeswitch@internal> ftdm list +OK span: 1 (wp1) type: Sangoma (ISDN) physical_status: alarmed signaling_status: UP chan_count: 31 dialplan: XML context: public dial_regex: fail_dial_regex: hold_music: analog_options none
Maybe anybody know about such problem?
Thank You David! I resolved this problem by changing RRING and RTIP, TRING and TTIP between himself. And i remember, when a was an scool, us IT teacher say to us: Boys! Before you tell me your questions, get up your hand, then blood reached your head, and maybe need of your question get out. :)
participants (3)
-
David Yat Sin
-
vik_kom
-
вик_ком коммисаров