Hello ALL,
I installed FWS 1.0.7 + Sangoma A104D
CentOS 5.5
wanpipe-3.5.18
libsng_isdn-7.0.0.x86_64.
When I try call from outside, I see such messages
freeswitch@internal> 2011-01-26 17:59:44.501244 [INFO]
ftmod_sangoma_isdn_stack_rcv.c:75 [s1c1][1:1] Received SETUP (suId:1
suInstId:0 spInstId:35)
2011-01-26 17:59:44.501244 [INFO] ftmod_sangoma_isdn_trace.c:223 [SNGISDN
Q931] wp1 FRAME INCOMING: Prot Disc:Q.931/I.451 (0x08)
Call Ref:1136 (Originating side)
Type:SETUP (0x5)
Bearer Capability:Coding:ITU-T(0) TransferCap:Speech(0) TransferRate:64
Kbit/s(16) L1Prot:G.711 A-Law(3)
Channel Id:No:1 Type:B-chans(3) Preferred/Implicit
Calling Party Number:495XXXXXXX(l:10) plan:isdn(1)
type:national(2)scr:network, provided(3) pres:allowed(0)
Called Party Number:XXXXXXX(l:7) plan:isdn(1) type:national(2)
Sending complete:
[ 08 02 11 36 05 04 03 80 90 a3 18 03 a1 83 81 6c 0c 21 83 34 39 35 37 38
39 33 35 39 31 70 08 a1
32 38 37 38 37 38 36 a1 00 ]
2011-01-26 17:59:44.501244 [DEBUG] ftmod_sangoma_isdn_stack_hndl.c:57
[s1c1][1:1] Processing SETUP (suId:1 suInstId:0 spInstId:35)
2011-01-26 17:59:44.501244 [WARNING] ftdm_io.c:1789 [s1c1][1:1] Cannot open
channel when is alarmed
2011-01-26 17:59:44.501244 [INFO] ftmod_sangoma_isdn_stack_hndl.c:64
[s1c1][1:1] Received SETUP but channel is in USE, saving call for later
processing
2011-01-26 17:59:48.501214 [INFO] ftmod_sangoma_isdn_trace.c:223 [SNGISDN
Q931] wp1 FRAME INCOMING: Prot Disc:Q.931/I.451 (0x08)
Call Ref:1136 (Originating side)
Type:SETUP (0x5)
Bearer Capability:Coding:ITU-T(0) TransferCap:Speech(0) TransferRate:64
Kbit/s(16) L1Prot:G.711 A-Law(3)
Channel Id:No:1 Type:B-chans(3) Preferred/Implicit
Calling Party Number:495XXXXXXX(l:10) plan:isdn(1)
type:national(2)scr:network, provided(3) pres:allowed(0)
Called Party Number:XXXXXXX(l:7) plan:isdn(1) type:national(2)
Sending complete:
[ 08 02 11 36 05 04 03 80 90 a3 18 03 a1 83 81 6c 0c 21 83 34 39 35 37 38
39 33 35 39 31 70 08 a1
32 38 37 38 37 38 36 a1 00 ]
2011-01-26 17:59:48.501214 [WARNING] ftmod_sangoma_isdn_stack_rcv.c:760
[SNGISDN Q931] s1: Protocol: Unknown Event Code(2): Incomp Msg(276)
2011-01-26 17:59:52.547185 [INFO] ftmod_sangoma_isdn_stack_rcv.c:245
[s1c1][1:1] Received RELEASE/RELEASE COMPLETE (suId:1 suInstId:0
spInstId:35)
2011-01-26 17:59:52.547185 [INFO] ftmod_sangoma_isdn_trace.c:223 [SNGISDN
Q931] wp1 FRAME INCOMING: Prot Disc:Q.931/I.451 (0x08)
Call Ref:1136 (Originating side)
Type:RELEASE COMPLETE (0x5a)
Cause:coding:ITU-T(0) location:User(0) val:Recovery on timer expired(102)
Timer T
[ 08 02 11 36 5a 08 02 80 e6 00 ]
2011-01-26 17:59:52.547185 [DEBUG] ftmod_sangoma_isdn_stack_hndl.c:578
[s1c1][1:1] Processing RELEASE/RELEASE COMPLETE (suId:1 suInstId:0
spInstId:35)
2011-01-26 17:59:52.547185 [DEBUG] ftmod_sangoma_isdn_support.c:73
[s1c1][1:1] Clearing glare data (suId:1 suInstId:0 spInstId:35
actv-suInstId:0 actv-spInstId:0)
I check freetdm.conf and freetdm.conf.xml it seem like correct,
but
freeswitch@internal> ftdm list
+OK
span: 1 (wp1)
type: Sangoma (ISDN)
physical_status: alarmed
signaling_status: UP
chan_count: 31
dialplan: XML
context: public
dial_regex:
fail_dial_regex:
hold_music:
analog_options none
Maybe anybody know about such problem?