Adding SIP Headers in Javascript
Quick Version: Is there some special way to set custom SIP headers when you are bridging a call from Javascript instead of XML? Full Details: We am using Voice Operator Panel (VOP) as a receptionist console. We have multiple external numbers that all funnel into a few receptionist desks. If I add a SIP Diversion header, then VOP will use that to show the receptionist which number the caller dialed to reach them, which would help things out a lot. If I add it in an XML dialplan and then do a direct bridge to one of the receptionist numbers, it works great (snip of working direct dialplan): <action application="set" data="sip_h_Diversion=<sip:${ destination_number}@pbx.example.org
;privacy=off;reason=unconditional;counter=1;screen=no"/> <action application="bridge" data="user/1000@pbx.example.org"/>
The problem is I need a bit of advanced logic to figure out which receptionist are online and then ring those, then fail over to other numbers and ultimately IVR if no one answers, so I instead pass calls to them off to javascript, so the bridge line above becomes something link: <action application="javascript" data="${jslib}/frontdesk.js ${dialed_extension} ${domain_name} ${destination_number}" /> I've tried setting the SIP header in the XML above the javascript line and then exporting it <action application="set" data="sip_h_Diversion=<sip:${ destination_number}@pbx.example.org>;privacy=off;reason=unconditional;counter=1;screen=no"/> <action application="export" data="sip_h_Diversion" /> and setting it in the Javascript: var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@ pbx.example.org>;privacy=off;reason=unconditional;counter=1;screen=no'; session.execute('set',diversionHeader); session.execute('export','sip_h_Diversion'); but in both cases (or with both in place), the SIP header is never written. Is there some magic to setting SIP headers in Javascript? I can't seem to find any examples or documentation about it. Thanks!
Not sure if you still need help with this but could you post some more of your javascript code? Something about this line is off to me but maybe it makes sense in the grander scheme of things. var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@pbx.example.org<http://pbx.example.org>>;privacy=off;reason=unconditional;counter=1;screen=no'; I have not used javascript with freeswitch in a little while, so I might be totally wrong but did you declare $destination_number? Because its possible its undefined if you didn’t declare that specifically equal to the value you passed in via args and thus javascript does you a solid and makes the whole string undefined which sets the sip_h_Diversion to null which is why it isn’t exporting. Maybe try argv[3] or argv[2] (console them out I am not sure which one it’ll be) instead of $destination_number in your concatenation? If that isn’t it and you are still having an issue we can try some other stuff. Thanks, Branden Jordan From: FreeSWITCH-users <freeswitch-users-bounces@lists.freeswitch.org> On Behalf Of Preston Hagar Sent: Friday, May 18, 2018 8:55 AM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: [Freeswitch-users] Adding SIP Headers in Javascript Quick Version: Is there some special way to set custom SIP headers when you are bridging a call from Javascript instead of XML? Full Details: We am using Voice Operator Panel (VOP) as a receptionist console. We have multiple external numbers that all funnel into a few receptionist desks. If I add a SIP Diversion header, then VOP will use that to show the receptionist which number the caller dialed to reach them, which would help things out a lot. If I add it in an XML dialplan and then do a direct bridge to one of the receptionist numbers, it works great (snip of working direct dialplan): <action application="set" data="sip_h_Diversion=<sip:${destination_number}@pbx.example.org<mailto:destination_number%7D@pbx.example.org>>;privacy=off;reason=unconditional;counter=1;screen=no"/> <action application="bridge" data="user/1000@pbx.example.org<mailto:1000@pbx.example.org>"/> The problem is I need a bit of advanced logic to figure out which receptionist are online and then ring those, then fail over to other numbers and ultimately IVR if no one answers, so I instead pass calls to them off to javascript, so the bridge line above becomes something link: <action application="javascript" data="${jslib}/frontdesk.js ${dialed_extension} ${domain_name} ${destination_number}" /> I've tried setting the SIP header in the XML above the javascript line and then exporting it <action application="set" data="sip_h_Diversion=<sip:${destination_number}@pbx.example.org<mailto:destination_number%7D@pbx.example.org>>;privacy=off;reason=unconditional;counter=1;screen=no"/> <action application="export" data="sip_h_Diversion" /> and setting it in the Javascript: var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@pbx.example.org<http://pbx.example.org>>;privacy=off;reason=unconditional;counter=1;screen=no'; session.execute('set',diversionHeader); session.execute('export','sip_h_Diversion'); but in both cases (or with both in place), the SIP header is never written. Is there some magic to setting SIP headers in Javascript? I can't seem to find any examples or documentation about it. Thanks!
Thanks for responding! Below is a bit more code to fill in the gaps. I'm passing the destination_number from the XML as a third argument. When I test out the code below, the console_log does in fact print out a "correct" Diversion header line. If I use the exact same Diversion header, set in my XML dialplan, it shows up in the SIP packet and the VOP software reads it. When I set it using session.execute in javascript, then no Diversion header, even an incorrect one, gets added to the SIP packet. I don't think it is in the variable substitution or anything like that. I've also tried not passing a variable to session.execute and just putting the string in the command, as well as just hard coding a test number. In all cases, no Diversion header ever shows up. Either I'm not setting it right for javascript or there is something different about setting it in Javascript vs XML that I haven't figured out. Here is more expanded code: var $extension = argv[0]; var $pbx_domain = argv[1]; var $destination_number = argv[2]; var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@ pbx.example.org>;privacy=off;reason=unconditional;counter=1;screen=no'; session.execute('set',diversionHeader); session.execute('export','sip_h_Diversion'); onsole_log("notice","Trying receptionist"); console_log("notice",session.state); console_log("notice",diversionHeader); session.execute('set', 'call_timeout=15'); var logic = '{ignore_early_media=true}user/1003@' + $pbx_domain; session.execute('bridge', logic); console_log("notice","Trying Kim"); console_log("notice",session.state); session.execute('set', 'call_timeout=10'); session.execute('bridge', 'user/2741@' + $pbx_domain); // No one answered, send to IVR console_log("notice","No one is answering"); console_log("notice",session.state); if (session.state == "CS_EXECUTE") { console_log("notice","Trying IVR"); session.execute('transfer', 'ivr'); } On Mon, May 21, 2018 at 6:57 PM, Branden Jordan <BJordan@e-teleco.com> wrote:
Not sure if you still need help with this but could you post some more of your javascript code? Something about this line is off to me but maybe it makes sense in the grander scheme of things.
var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@pbx.example.org>;privacy=off;reason=unconditional;counter=1;screen=no';
I have not used javascript with freeswitch in a little while, so I might be totally wrong but did you declare $destination_number? Because its possible its undefined if you didn’t declare that specifically equal to the value you passed in via args and thus javascript does you a solid and makes the whole string undefined which sets the sip_h_Diversion to null which is why it isn’t exporting. Maybe try argv[3] or argv[2] (console them out I am not sure which one it’ll be) instead of $destination_number in your concatenation?
If that isn’t it and you are still having an issue we can try some other stuff.
Thanks,
Branden Jordan
*From:* FreeSWITCH-users <freeswitch-users-bounces@lists.freeswitch.org> *On Behalf Of *Preston Hagar *Sent:* Friday, May 18, 2018 8:55 AM *To:* FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> *Subject:* [Freeswitch-users] Adding SIP Headers in Javascript
Quick Version: Is there some special way to set custom SIP headers when you are bridging a call from Javascript instead of XML?
Full Details:
We am using Voice Operator Panel (VOP) as a receptionist console. We have multiple external numbers that all funnel into a few receptionist desks. If I add a SIP Diversion header, then VOP will use that to show the receptionist which number the caller dialed to reach them, which would help things out a lot.
If I add it in an XML dialplan and then do a direct bridge to one of the receptionist numbers, it works great (snip of working direct dialplan):
<action application="set" data="sip_h_Diversion=<sip:${d estination_number}@pbx.example.org>;privacy=off; reason=unconditional;counter=1;screen=no"/>
<action application="bridge" data="user/1000@pbx.example.org"/>
The problem is I need a bit of advanced logic to figure out which receptionist are online and then ring those, then fail over to other numbers and ultimately IVR if no one answers, so I instead pass calls to them off to javascript, so the bridge line above becomes something link:
<action application="javascript" data="${jslib}/frontdesk.js ${dialed_extension} ${domain_name} ${destination_number}" />
I've tried setting the SIP header in the XML above the javascript line and then exporting it
<action application="set" data="sip_h_Diversion=<sip:${d estination_number}@pbx.example.org>;privacy=off; reason=unconditional;counter=1;screen=no"/>
<action application="export" data="sip_h_Diversion" />
and setting it in the Javascript:
var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@pbx.example.org>;privacy=off;reason=unconditional;counter=1;screen=no';
session.execute('set',diversionHeader);
session.execute('export','sip_h_Diversion');
but in both cases (or with both in place), the SIP header is never written.
Is there some magic to setting SIP headers in Javascript? I can't seem to find any examples or documentation about it.
Thanks!
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I don’t see any reason why that wouldn’t work but maybe there is something weird going on with the javascript session object where it isn’t getting/setting the exported variables from the session when you are doing the bridge? Have you tried making a new session object and setting your variables for that session object instead of doing a session.execute? I found something like this on the Wiki that you might be able to do, small example below. var anotherSession = new Session(session, '{ignore_early_media=true}user/1003@' + $pbx_domain); anotherSession.execute(‘set’,diversionHeader); bridge(session, anotherSession); anotherSession.hangup(); Like I said earlier I am a bit rusty on the Javascript side, (no idea if bridge blocks or if you have to do a loop) but I know that would work on the LUA side which is where I am more familiar. I know Javascript examples are a little light on the wiki but you might be able to get the gist of what is going on in the LUA side and then mimic that in Javascript. https://freeswitch.org/confluence/display/FREESWITCH/Lua+example+Bridging+tw... Thanks, Branden Jordan From: FreeSWITCH-users <freeswitch-users-bounces@lists.freeswitch.org> On Behalf Of Preston Hagar Sent: Monday, May 21, 2018 6:53 PM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] Adding SIP Headers in Javascript Thanks for responding! Below is a bit more code to fill in the gaps. I'm passing the destination_number from the XML as a third argument. When I test out the code below, the console_log does in fact print out a "correct" Diversion header line. If I use the exact same Diversion header, set in my XML dialplan, it shows up in the SIP packet and the VOP software reads it. When I set it using session.execute in javascript, then no Diversion header, even an incorrect one, gets added to the SIP packet. I don't think it is in the variable substitution or anything like that. I've also tried not passing a variable to session.execute and just putting the string in the command, as well as just hard coding a test number. In all cases, no Diversion header ever shows up. Either I'm not setting it right for javascript or there is something different about setting it in Javascript vs XML that I haven't figured out. Here is more expanded code: var $extension = argv[0]; var $pbx_domain = argv[1]; var $destination_number = argv[2]; var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@pbx.example.org<http://pbx.example.org>>;privacy=off;reason=unconditional;counter=1;screen=no'; session.execute('set',diversionHeader); session.execute('export','sip_h_Diversion'); onsole_log("notice","Trying receptionist"); console_log("notice",session.state); console_log("notice",diversionHeader); session.execute('set', 'call_timeout=15'); var logic = '{ignore_early_media=true}user/1003@' + $pbx_domain; session.execute('bridge', logic); console_log("notice","Trying Kim"); console_log("notice",session.state); session.execute('set', 'call_timeout=10'); session.execute('bridge', 'user/2741@' + $pbx_domain); // No one answered, send to IVR console_log("notice","No one is answering"); console_log("notice",session.state); if (session.state == "CS_EXECUTE") { console_log("notice","Trying IVR"); session.execute('transfer', 'ivr'); } On Mon, May 21, 2018 at 6:57 PM, Branden Jordan <BJordan@e-teleco.com<mailto:BJordan@e-teleco.com>> wrote: Not sure if you still need help with this but could you post some more of your javascript code? Something about this line is off to me but maybe it makes sense in the grander scheme of things. var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@pbx.example.org<http://pbx.example.org>>;privacy=off;reason=unconditional;counter=1;screen=no'; I have not used javascript with freeswitch in a little while, so I might be totally wrong but did you declare $destination_number? Because its possible its undefined if you didn’t declare that specifically equal to the value you passed in via args and thus javascript does you a solid and makes the whole string undefined which sets the sip_h_Diversion to null which is why it isn’t exporting. Maybe try argv[3] or argv[2] (console them out I am not sure which one it’ll be) instead of $destination_number in your concatenation? If that isn’t it and you are still having an issue we can try some other stuff. Thanks, Branden Jordan From: FreeSWITCH-users <freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org>> On Behalf Of Preston Hagar Sent: Friday, May 18, 2018 8:55 AM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org<mailto:freeswitch-users@lists.freeswitch.org>> Subject: [Freeswitch-users] Adding SIP Headers in Javascript Quick Version: Is there some special way to set custom SIP headers when you are bridging a call from Javascript instead of XML? Full Details: We am using Voice Operator Panel (VOP) as a receptionist console. We have multiple external numbers that all funnel into a few receptionist desks. If I add a SIP Diversion header, then VOP will use that to show the receptionist which number the caller dialed to reach them, which would help things out a lot. If I add it in an XML dialplan and then do a direct bridge to one of the receptionist numbers, it works great (snip of working direct dialplan): <action application="set" data="sip_h_Diversion=<sip:${destination_number}@pbx.example.org<mailto:destination_number%7D@pbx.example.org>>;privacy=off;reason=unconditional;counter=1;screen=no"/> <action application="bridge" data="user/1000@pbx.example.org<mailto:1000@pbx.example.org>"/> The problem is I need a bit of advanced logic to figure out which receptionist are online and then ring those, then fail over to other numbers and ultimately IVR if no one answers, so I instead pass calls to them off to javascript, so the bridge line above becomes something link: <action application="javascript" data="${jslib}/frontdesk.js ${dialed_extension} ${domain_name} ${destination_number}" /> I've tried setting the SIP header in the XML above the javascript line and then exporting it <action application="set" data="sip_h_Diversion=<sip:${destination_number}@pbx.example.org<mailto:destination_number%7D@pbx.example.org>>;privacy=off;reason=unconditional;counter=1;screen=no"/> <action application="export" data="sip_h_Diversion" /> and setting it in the Javascript: var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@pbx.example.org<http://pbx.example.org>>;privacy=off;reason=unconditional;counter=1;screen=no'; session.execute('set',diversionHeader); session.execute('export','sip_h_Diversion'); but in both cases (or with both in place), the SIP header is never written. Is there some magic to setting SIP headers in Javascript? I can't seem to find any examples or documentation about it. Thanks! _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I’d avoid using the bridge function like this, but worthwhile to set the variable using the direct method instead of session execute for set application.
On May 22, 2018, at 5:01 PM, Branden Jordan <BJordan@E-Teleco.com> wrote:
I don’t see any reason why that wouldn’t work but maybe there is something weird going on with the javascript session object where it isn’t getting/setting the exported variables from the session when you are doing the bridge? Have you tried making a new session object and setting your variables for that session object instead of doing a session.execute? I found something like this on the Wiki that you might be able to do, small example below.
var anotherSession = new Session(session, '{ignore_early_media=true}user/1003@' + $pbx_domain); anotherSession.execute(‘set’,diversionHeader); bridge(session, anotherSession); anotherSession.hangup();
Like I said earlier I am a bit rusty on the Javascript side, (no idea if bridge blocks or if you have to do a loop) but I know that would work on the LUA side which is where I am more familiar. I know Javascript examples are a little light on the wiki but you might be able to get the gist of what is going on in the LUA side and then mimic that in Javascript. https://freeswitch.org/confluence/display/FREESWITCH/Lua+example+Bridging+tw... <https://freeswitch.org/confluence/display/FREESWITCH/Lua+example+Bridging+two+calls+with+retry>
Thanks,
Branden Jordan
From: FreeSWITCH-users <freeswitch-users-bounces@lists.freeswitch.org> On Behalf Of Preston Hagar Sent: Monday, May 21, 2018 6:53 PM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] Adding SIP Headers in Javascript
Thanks for responding!
Below is a bit more code to fill in the gaps. I'm passing the destination_number from the XML as a third argument. When I test out the code below, the console_log does in fact print out a "correct" Diversion header line. If I use the exact same Diversion header, set in my XML dialplan, it shows up in the SIP packet and the VOP software reads it. When I set it using session.execute in javascript, then no Diversion header, even an incorrect one, gets added to the SIP packet.
I don't think it is in the variable substitution or anything like that. I've also tried not passing a variable to session.execute and just putting the string in the command, as well as just hard coding a test number. In all cases, no Diversion header ever shows up. Either I'm not setting it right for javascript or there is something different about setting it in Javascript vs XML that I haven't figured out.
Here is more expanded code:
var $extension = argv[0]; var $pbx_domain = argv[1]; var $destination_number = argv[2];
var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@pbx.example.org <http://pbx.example.org/>>;privacy=off;reason=unconditional;counter=1;screen=no';
session.execute('set',diversionHeader); session.execute('export','sip_h_Diversion');
onsole_log("notice","Trying receptionist"); console_log("notice",session.state); console_log("notice",diversionHeader); session.execute('set', 'call_timeout=15');
var logic = '{ignore_early_media=true}user/1003@' + $pbx_domain; session.execute('bridge', logic);
console_log("notice","Trying Kim"); console_log("notice",session.state); session.execute('set', 'call_timeout=10'); session.execute('bridge', 'user/2741@' + $pbx_domain);
// No one answered, send to IVR
console_log("notice","No one is answering"); console_log("notice",session.state); if (session.state == "CS_EXECUTE") { console_log("notice","Trying IVR"); session.execute('transfer', 'ivr'); }
On Mon, May 21, 2018 at 6:57 PM, Branden Jordan <BJordan@e-teleco.com <mailto:BJordan@e-teleco.com>> wrote: Not sure if you still need help with this but could you post some more of your javascript code? Something about this line is off to me but maybe it makes sense in the grander scheme of things. var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@pbx.example.org <http://pbx.example.org/>>;privacy=off;reason=unconditional;counter=1;screen=no';
I have not used javascript with freeswitch in a little while, so I might be totally wrong but did you declare $destination_number? Because its possible its undefined if you didn’t declare that specifically equal to the value you passed in via args and thus javascript does you a solid and makes the whole string undefined which sets the sip_h_Diversion to null which is why it isn’t exporting. Maybe try argv[3] or argv[2] (console them out I am not sure which one it’ll be) instead of $destination_number in your concatenation?
If that isn’t it and you are still having an issue we can try some other stuff.
Thanks, Branden Jordan
From: FreeSWITCH-users <freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org>> On Behalf Of Preston Hagar Sent: Friday, May 18, 2018 8:55 AM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org>> Subject: [Freeswitch-users] Adding SIP Headers in Javascript
Quick Version: Is there some special way to set custom SIP headers when you are bridging a call from Javascript instead of XML?
Full Details: We am using Voice Operator Panel (VOP) as a receptionist console. We have multiple external numbers that all funnel into a few receptionist desks. If I add a SIP Diversion header, then VOP will use that to show the receptionist which number the caller dialed to reach them, which would help things out a lot.
If I add it in an XML dialplan and then do a direct bridge to one of the receptionist numbers, it works great (snip of working direct dialplan):
<action application="set" data="sip_h_Diversion=<sip:${destination_number}@pbx.example.org <mailto:destination_number%7D@pbx.example.org>>;privacy=off;reason=unconditional;counter=1;screen=no"/> <action application="bridge" data="user/1000@pbx.example.org <mailto:1000@pbx.example.org>"/>
The problem is I need a bit of advanced logic to figure out which receptionist are online and then ring those, then fail over to other numbers and ultimately IVR if no one answers, so I instead pass calls to them off to javascript, so the bridge line above becomes something link:
<action application="javascript" data="${jslib}/frontdesk.js ${dialed_extension} ${domain_name} ${destination_number}" />
I've tried setting the SIP header in the XML above the javascript line and then exporting it <action application="set" data="sip_h_Diversion=<sip:${destination_number}@pbx.example.org <mailto:destination_number%7D@pbx.example.org>>;privacy=off;reason=unconditional;counter=1;screen=no"/> <action application="export" data="sip_h_Diversion" />
and setting it in the Javascript:
var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@pbx.example.org <http://pbx.example.org/>>;privacy=off;reason=unconditional;counter=1;screen=no';
session.execute('set',diversionHeader); session.execute('export','sip_h_Diversion');
but in both cases (or with both in place), the SIP header is never written.
Is there some magic to setting SIP headers in Javascript? I can't seem to find any examples or documentation about it.
Thanks!
I figured out my issue. I had left out part of my code in previous emails to try to make it simpler, and left out the part that was messing things up. So after I set the sip Diversion header: var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@ pbx.example.org>;privacy=off;reason=unconditional;counter=1;screen=no'; session.execute('set',diversionHeader); I would set a timeout: session.execute('set', 'call_timeout=45'); Then I would ring all three receptionist stations at once with a bridge command: var logic = '{ignore_early_media=true}user/1000@' + $pbx_domain + ':_:user/1001@' + $pbx_domain + ':_:user/1002@' + $pbx_domain; session.execute('bridge', logic); The problem ended up stemming from me ringing all three at once using the :_: to join the extensions. I switched it over to commas: var logic = '{ignore_early_media=true}user/1000@' + $pbx_domain + ',user/1001@' + $pbx_domain + ',user/1002@' + $pbx_domain; session.execute('bridge', logic); and now the Diversion header shows up as expected. We shouldn't have multiple registrations for any of those numbers, so it shouldn't be an issue. Thanks everyone for taking a look. Out of curiosity, what is the "direct method" for setting the SIP header (instead of using session.execute)? I can't seem to find anything in the documentation. Thanks again, On Wed, May 23, 2018 at 10:26 AM, Michael Jerris <mike@jerris.com> wrote:
I’d avoid using the bridge function like this, but worthwhile to set the variable using the direct method instead of session execute for set application.
On May 22, 2018, at 5:01 PM, Branden Jordan <BJordan@E-Teleco.com> wrote:
I don’t see any reason why that wouldn’t work but maybe there is something weird going on with the javascript session object where it isn’t getting/setting the exported variables from the session when you are doing the bridge? Have you tried making a new session object and setting your variables for that session object instead of doing a session.execute? I found something like this on the Wiki that you might be able to do, small example below.
var anotherSession = new Session(session, '{ignore_ early_media=true}user/1003@' + $pbx_domain); anotherSession.execute(‘set’,diversionHeader); bridge(session, anotherSession); anotherSession.hangup();
Like I said earlier I am a bit rusty on the Javascript side, (no idea if bridge blocks or if you have to do a loop) but I know that would work on the LUA side which is where I am more familiar. I know Javascript examples are a little light on the wiki but you might be able to get the gist of what is going on in the LUA side and then mimic that in Javascript. https://freeswitch.org/confluence/display/FREESWITCH/Lua+ example+Bridging+two+calls+with+retry
Thanks,
Branden Jordan
*From:* FreeSWITCH-users <freeswitch-users-bounces@lists.freeswitch.org> *On Behalf Of *Preston Hagar *Sent:* Monday, May 21, 2018 6:53 PM *To:* FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> *Subject:* Re: [Freeswitch-users] Adding SIP Headers in Javascript
Thanks for responding!
Below is a bit more code to fill in the gaps. I'm passing the destination_number from the XML as a third argument. When I test out the code below, the console_log does in fact print out a "correct" Diversion header line. If I use the exact same Diversion header, set in my XML dialplan, it shows up in the SIP packet and the VOP software reads it. When I set it using session.execute in javascript, then no Diversion header, even an incorrect one, gets added to the SIP packet.
I don't think it is in the variable substitution or anything like that. I've also tried not passing a variable to session.execute and just putting the string in the command, as well as just hard coding a test number. In all cases, no Diversion header ever shows up. Either I'm not setting it right for javascript or there is something different about setting it in Javascript vs XML that I haven't figured out.
Here is more expanded code:
var $extension = argv[0]; var $pbx_domain = argv[1]; var $destination_number = argv[2];
var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@ pbx.example.org>;privacy=off;reason=unconditional;counter=1;screen=no';
session.execute('set',diversionHeader); session.execute('export','sip_h_Diversion');
onsole_log("notice","Trying receptionist"); console_log("notice",session.state); console_log("notice",diversionHeader); session.execute('set', 'call_timeout=15');
var logic = '{ignore_early_media=true}user/1003@' + $pbx_domain; session.execute('bridge', logic);
console_log("notice","Trying Kim"); console_log("notice",session.state); session.execute('set', 'call_timeout=10'); session.execute('bridge', 'user/2741@' + $pbx_domain);
// No one answered, send to IVR
console_log("notice","No one is answering"); console_log("notice",session.state); if (session.state == "CS_EXECUTE") { console_log("notice","Trying IVR"); session.execute('transfer', 'ivr'); }
On Mon, May 21, 2018 at 6:57 PM, Branden Jordan <BJordan@e-teleco.com> wrote:
Not sure if you still need help with this but could you post some more of your javascript code? Something about this line is off to me but maybe it makes sense in the grander scheme of things. var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@pbx.example.org>;privacy=off;reason=unconditional;counter=1;screen=no';
I have not used javascript with freeswitch in a little while, so I might be totally wrong but did you declare $destination_number? Because its possible its undefined if you didn’t declare that specifically equal to the value you passed in via args and thus javascript does you a solid and makes the whole string undefined which sets the sip_h_Diversion to null which is why it isn’t exporting. Maybe try argv[3] or argv[2] (console them out I am not sure which one it’ll be) instead of $destination_number in your concatenation?
If that isn’t it and you are still having an issue we can try some other stuff.
Thanks, Branden Jordan
*From:* FreeSWITCH-users <freeswitch-users-bounces@lists.freeswitch.org> *On Behalf Of *Preston Hagar *Sent:* Friday, May 18, 2018 8:55 AM *To:* FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> *Subject:* [Freeswitch-users] Adding SIP Headers in Javascript
Quick Version: Is there some special way to set custom SIP headers when you are bridging a call from Javascript instead of XML?
Full Details: We am using Voice Operator Panel (VOP) as a receptionist console. We have multiple external numbers that all funnel into a few receptionist desks. If I add a SIP Diversion header, then VOP will use that to show the receptionist which number the caller dialed to reach them, which would help things out a lot.
If I add it in an XML dialplan and then do a direct bridge to one of the receptionist numbers, it works great (snip of working direct dialplan):
<action application="set" data="sip_h_Diversion=<sip:${d estination_number}@pbx.example.org>;privacy=off; reason=unconditional;counter=1;screen=no"/> <action application="bridge" data="user/1000@pbx.example.org"/>
The problem is I need a bit of advanced logic to figure out which receptionist are online and then ring those, then fail over to other numbers and ultimately IVR if no one answers, so I instead pass calls to them off to javascript, so the bridge line above becomes something link:
<action application="javascript" data="${jslib}/frontdesk.js ${dialed_extension} ${domain_name} ${destination_number}" />
I've tried setting the SIP header in the XML above the javascript line and then exporting it <action application="set" data="sip_h_Diversion=<sip:${d estination_number}@pbx.example.org>;privacy=off; reason=unconditional;counter=1;screen=no"/>
<action application="export" data="sip_h_Diversion" />
and setting it in the Javascript:
var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@pbx.example.org>;privacy=off;reason=unconditional;counter=1;screen=no';
session.execute('set',diversionHeader); session.execute('export','sip_h_Diversion');
but in both cases (or with both in place), the SIP header is never written.
Is there some magic to setting SIP headers in Javascript? I can't seem to find any examples or documentation about it.
Thanks!
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
session.setVariable(var, val);
On May 23, 2018, at 1:46 PM, Preston Hagar <prestonh@gmail.com> wrote:
I figured out my issue. I had left out part of my code in previous emails to try to make it simpler, and left out the part that was messing things up.
So after I set the sip Diversion header:
var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@pbx.example.org <http://pbx.example.org/>>;privacy=off;reason=unconditional;counter=1;screen=no';
session.execute('set',diversionHeader);
I would set a timeout:
session.execute('set', 'call_timeout=45');
Then I would ring all three receptionist stations at once with a bridge command:
var logic = '{ignore_early_media=true}user/1000@' + $pbx_domain + ':_:user/1001@' + $pbx_domain + ':_:user/1002@' + $pbx_domain; session.execute('bridge', logic);
The problem ended up stemming from me ringing all three at once using the :_: to join the extensions. I switched it over to commas:
var logic = '{ignore_early_media=true}user/1000@' + $pbx_domain + ',user/1001@' + $pbx_domain + ',user/1002@' + $pbx_domain; session.execute('bridge', logic);
and now the Diversion header shows up as expected. We shouldn't have multiple registrations for any of those numbers, so it shouldn't be an issue.
Thanks everyone for taking a look.
Out of curiosity, what is the "direct method" for setting the SIP header (instead of using session.execute)? I can't seem to find anything in the documentation.
Thanks again,
On Wed, May 23, 2018 at 10:26 AM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote: I’d avoid using the bridge function like this, but worthwhile to set the variable using the direct method instead of session execute for set application.
On May 22, 2018, at 5:01 PM, Branden Jordan <BJordan@E-Teleco.com <mailto:BJordan@E-Teleco.com>> wrote:
I don’t see any reason why that wouldn’t work but maybe there is something weird going on with the javascript session object where it isn’t getting/setting the exported variables from the session when you are doing the bridge? Have you tried making a new session object and setting your variables for that session object instead of doing a session.execute? I found something like this on the Wiki that you might be able to do, small example below.
var anotherSession = new Session(session, '{ignore_early_media=true}user/1003@' + $pbx_domain); anotherSession.execute(‘set’,diversionHeader); bridge(session, anotherSession); anotherSession.hangup();
Like I said earlier I am a bit rusty on the Javascript side, (no idea if bridge blocks or if you have to do a loop) but I know that would work on the LUA side which is where I am more familiar. I know Javascript examples are a little light on the wiki but you might be able to get the gist of what is going on in the LUA side and then mimic that in Javascript. https://freeswitch.org/confluence/display/FREESWITCH/Lua+example+Bridging+tw... <https://freeswitch.org/confluence/display/FREESWITCH/Lua+example+Bridging+two+calls+with+retry>
Thanks,
Branden Jordan
From: FreeSWITCH-users <freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org>> On Behalf Of Preston Hagar Sent: Monday, May 21, 2018 6:53 PM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org>> Subject: Re: [Freeswitch-users] Adding SIP Headers in Javascript
Thanks for responding!
Below is a bit more code to fill in the gaps. I'm passing the destination_number from the XML as a third argument. When I test out the code below, the console_log does in fact print out a "correct" Diversion header line. If I use the exact same Diversion header, set in my XML dialplan, it shows up in the SIP packet and the VOP software reads it. When I set it using session.execute in javascript, then no Diversion header, even an incorrect one, gets added to the SIP packet.
I don't think it is in the variable substitution or anything like that. I've also tried not passing a variable to session.execute and just putting the string in the command, as well as just hard coding a test number. In all cases, no Diversion header ever shows up. Either I'm not setting it right for javascript or there is something different about setting it in Javascript vs XML that I haven't figured out.
Here is more expanded code:
var $extension = argv[0]; var $pbx_domain = argv[1]; var $destination_number = argv[2];
var diversionHeader = 'sip_h_Diversion=<sip:' <> + $destination_number + '@pbx.example.org <http://pbx.example.org/>>;privacy=off;reason=unconditional;counter=1;screen=no';
session.execute('set',diversionHeader); session.execute('export','sip_h_Diversion');
onsole_log("notice","Trying receptionist"); console_log("notice",session.state); console_log("notice",diversionHeader); session.execute('set', 'call_timeout=15');
var logic = '{ignore_early_media=true}user/1003@' + $pbx_domain; session.execute('bridge', logic);
console_log("notice","Trying Kim"); console_log("notice",session.state); session.execute('set', 'call_timeout=10'); session.execute('bridge', 'user/2741@' + $pbx_domain);
// No one answered, send to IVR
console_log("notice","No one is answering"); console_log("notice",session.state); if (session.state == "CS_EXECUTE") { console_log("notice","Trying IVR"); session.execute('transfer', 'ivr'); }
On Mon, May 21, 2018 at 6:57 PM, Branden Jordan <BJordan@e-teleco.com <mailto:BJordan@e-teleco.com>> wrote: Not sure if you still need help with this but could you post some more of your javascript code? Something about this line is off to me but maybe it makes sense in the grander scheme of things. var diversionHeader = 'sip_h_Diversion=<sip:' <> + $destination_number + '@pbx.example.org <http://pbx.example.org/>>;privacy=off;reason=unconditional;counter=1;screen=no';
I have not used javascript with freeswitch in a little while, so I might be totally wrong but did you declare $destination_number? Because its possible its undefined if you didn’t declare that specifically equal to the value you passed in via args and thus javascript does you a solid and makes the whole string undefined which sets the sip_h_Diversion to null which is why it isn’t exporting. Maybe try argv[3] or argv[2] (console them out I am not sure which one it’ll be) instead of $destination_number in your concatenation?
If that isn’t it and you are still having an issue we can try some other stuff.
Thanks, Branden Jordan
From: FreeSWITCH-users <freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org>> On Behalf Of Preston Hagar Sent: Friday, May 18, 2018 8:55 AM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org>> Subject: [Freeswitch-users] Adding SIP Headers in Javascript
Quick Version: Is there some special way to set custom SIP headers when you are bridging a call from Javascript instead of XML?
Full Details: We am using Voice Operator Panel (VOP) as a receptionist console. We have multiple external numbers that all funnel into a few receptionist desks. If I add a SIP Diversion header, then VOP will use that to show the receptionist which number the caller dialed to reach them, which would help things out a lot.
If I add it in an XML dialplan and then do a direct bridge to one of the receptionist numbers, it works great (snip of working direct dialplan):
<action application="set" data="sip_h_Diversion=<sip:$ <>{destination_number}@pbx.example.org <mailto:destination_number%7D@pbx.example.org>>;privacy=off;reason=unconditional;counter=1;screen=no"/> <action application="bridge" data="user/1000@pbx.example.org <mailto:1000@pbx.example.org>"/>
The problem is I need a bit of advanced logic to figure out which receptionist are online and then ring those, then fail over to other numbers and ultimately IVR if no one answers, so I instead pass calls to them off to javascript, so the bridge line above becomes something link:
<action application="javascript" data="${jslib}/frontdesk.js ${dialed_extension} ${domain_name} ${destination_number}" />
I've tried setting the SIP header in the XML above the javascript line and then exporting it <action application="set" data="sip_h_Diversion=<sip:$ <>{destination_number}@pbx.example.org <mailto:destination_number%7D@pbx.example.org>>;privacy=off;reason=unconditional;counter=1;screen=no"/> <action application="export" data="sip_h_Diversion" />
and setting it in the Javascript:
var diversionHeader = 'sip_h_Diversion=<sip:' <> + $destination_number + '@pbx.example.org <http://pbx.example.org/>>;privacy=off;reason=unconditional;counter=1;screen=no';
session.execute('set',diversionHeader); session.execute('export','sip_h_Diversion');
but in both cases (or with both in place), the SIP header is never written.
Is there some magic to setting SIP headers in Javascript? I can't seem to find any examples or documentation about it.
Thanks!
Thanks, I'll try it out! On Wed, May 23, 2018 at 1:01 PM, Michael Jerris <mike@jerris.com> wrote:
session.setVariable(var, val);
On May 23, 2018, at 1:46 PM, Preston Hagar <prestonh@gmail.com> wrote:
I figured out my issue. I had left out part of my code in previous emails to try to make it simpler, and left out the part that was messing things up.
So after I set the sip Diversion header:
var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@ pbx.example.org>;privacy=off;reason=unconditional;counter=1;screen=no';
session.execute('set',diversionHeader);
I would set a timeout:
session.execute('set', 'call_timeout=45');
Then I would ring all three receptionist stations at once with a bridge command:
var logic = '{ignore_early_media=true}user/1000@' + $pbx_domain + ':_:user/1001@' + $pbx_domain + ':_:user/1002@' + $pbx_domain; session.execute('bridge', logic);
The problem ended up stemming from me ringing all three at once using the :_: to join the extensions. I switched it over to commas:
var logic = '{ignore_early_media=true}user/1000@' + $pbx_domain + ',user/1001@' + $pbx_domain + ',user/1002@' + $pbx_domain; session.execute('bridge', logic);
and now the Diversion header shows up as expected. We shouldn't have multiple registrations for any of those numbers, so it shouldn't be an issue.
Thanks everyone for taking a look.
Out of curiosity, what is the "direct method" for setting the SIP header (instead of using session.execute)? I can't seem to find anything in the documentation.
Thanks again,
On Wed, May 23, 2018 at 10:26 AM, Michael Jerris <mike@jerris.com> wrote:
I’d avoid using the bridge function like this, but worthwhile to set the variable using the direct method instead of session execute for set application.
On May 22, 2018, at 5:01 PM, Branden Jordan <BJordan@E-Teleco.com> wrote:
I don’t see any reason why that wouldn’t work but maybe there is something weird going on with the javascript session object where it isn’t getting/setting the exported variables from the session when you are doing the bridge? Have you tried making a new session object and setting your variables for that session object instead of doing a session.execute? I found something like this on the Wiki that you might be able to do, small example below.
var anotherSession = new Session(session, '{ignore_ early_media=true}user/1003@' + $pbx_domain); anotherSession.execute(‘set’,diversionHeader); bridge(session, anotherSession); anotherSession.hangup();
Like I said earlier I am a bit rusty on the Javascript side, (no idea if bridge blocks or if you have to do a loop) but I know that would work on the LUA side which is where I am more familiar. I know Javascript examples are a little light on the wiki but you might be able to get the gist of what is going on in the LUA side and then mimic that in Javascript. https://freeswitch.org/confluence/display/FREESWITCH/Lua+example+ Bridging+two+calls+with+retry
Thanks,
Branden Jordan
*From:* FreeSWITCH-users <freeswitch-users-bounces@lists.freeswitch.org> *On Behalf Of *Preston Hagar *Sent:* Monday, May 21, 2018 6:53 PM *To:* FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> *Subject:* Re: [Freeswitch-users] Adding SIP Headers in Javascript
Thanks for responding!
Below is a bit more code to fill in the gaps. I'm passing the destination_number from the XML as a third argument. When I test out the code below, the console_log does in fact print out a "correct" Diversion header line. If I use the exact same Diversion header, set in my XML dialplan, it shows up in the SIP packet and the VOP software reads it. When I set it using session.execute in javascript, then no Diversion header, even an incorrect one, gets added to the SIP packet.
I don't think it is in the variable substitution or anything like that. I've also tried not passing a variable to session.execute and just putting the string in the command, as well as just hard coding a test number. In all cases, no Diversion header ever shows up. Either I'm not setting it right for javascript or there is something different about setting it in Javascript vs XML that I haven't figured out.
Here is more expanded code:
var $extension = argv[0]; var $pbx_domain = argv[1]; var $destination_number = argv[2];
var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@ pbx.example.org>;privacy=off;reason=unconditional;counter=1;screen=no';
session.execute('set',diversionHeader); session.execute('export','sip_h_Diversion');
onsole_log("notice","Trying receptionist"); console_log("notice",session.state); console_log("notice",diversionHeader); session.execute('set', 'call_timeout=15');
var logic = '{ignore_early_media=true}user/1003@' + $pbx_domain; session.execute('bridge', logic);
console_log("notice","Trying Kim"); console_log("notice",session.state); session.execute('set', 'call_timeout=10'); session.execute('bridge', 'user/2741@' + $pbx_domain);
// No one answered, send to IVR
console_log("notice","No one is answering"); console_log("notice",session.state); if (session.state == "CS_EXECUTE") { console_log("notice","Trying IVR"); session.execute('transfer', 'ivr'); }
On Mon, May 21, 2018 at 6:57 PM, Branden Jordan <BJordan@e-teleco.com> wrote:
Not sure if you still need help with this but could you post some more of your javascript code? Something about this line is off to me but maybe it makes sense in the grander scheme of things. var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@pbx.example.org>;privacy=off;reason=unconditional;counter= 1;screen=no';
I have not used javascript with freeswitch in a little while, so I might be totally wrong but did you declare $destination_number? Because its possible its undefined if you didn’t declare that specifically equal to the value you passed in via args and thus javascript does you a solid and makes the whole string undefined which sets the sip_h_Diversion to null which is why it isn’t exporting. Maybe try argv[3] or argv[2] (console them out I am not sure which one it’ll be) instead of $destination_number in your concatenation?
If that isn’t it and you are still having an issue we can try some other stuff.
Thanks, Branden Jordan
*From:* FreeSWITCH-users <freeswitch-users-bounces@lists.freeswitch.org> *On Behalf Of *Preston Hagar *Sent:* Friday, May 18, 2018 8:55 AM *To:* FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> *Subject:* [Freeswitch-users] Adding SIP Headers in Javascript
Quick Version: Is there some special way to set custom SIP headers when you are bridging a call from Javascript instead of XML?
Full Details: We am using Voice Operator Panel (VOP) as a receptionist console. We have multiple external numbers that all funnel into a few receptionist desks. If I add a SIP Diversion header, then VOP will use that to show the receptionist which number the caller dialed to reach them, which would help things out a lot.
If I add it in an XML dialplan and then do a direct bridge to one of the receptionist numbers, it works great (snip of working direct dialplan):
<action application="set" data="sip_h_Diversion=<sip:${d estination_number}@pbx.example.org>;privacy=off;reason= unconditional;counter=1;screen=no"/> <action application="bridge" data="user/1000@pbx.example.org"/>
The problem is I need a bit of advanced logic to figure out which receptionist are online and then ring those, then fail over to other numbers and ultimately IVR if no one answers, so I instead pass calls to them off to javascript, so the bridge line above becomes something link:
<action application="javascript" data="${jslib}/frontdesk.js ${dialed_extension} ${domain_name} ${destination_number}" />
I've tried setting the SIP header in the XML above the javascript line and then exporting it <action application="set" data="sip_h_Diversion=<sip:${d estination_number}@pbx.example.org>;privacy=off;reason= unconditional;counter=1;screen=no"/>
<action application="export" data="sip_h_Diversion" />
and setting it in the Javascript:
var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@pbx.example.org>;privacy=off;reason=unconditional;counter= 1;screen=no';
session.execute('set',diversionHeader); session.execute('export','sip_h_Diversion');
but in both cases (or with both in place), the SIP header is never written.
Is there some magic to setting SIP headers in Javascript? I can't seem to find any examples or documentation about it.
Thanks!
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Maybe he is referring to session.setVariable()? https://freeswitch.org/confluence/display/FREESWITCH/Session+setVariable On Wed, May 23, 2018 at 10:46 AM, Preston Hagar <prestonh@gmail.com> wrote:
I figured out my issue. I had left out part of my code in previous emails to try to make it simpler, and left out the part that was messing things up.
So after I set the sip Diversion header:
var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@ pbx.example.org>;privacy=off;reason=unconditional;counter=1;screen=no';
session.execute('set',diversionHeader);
I would set a timeout:
session.execute('set', 'call_timeout=45');
Then I would ring all three receptionist stations at once with a bridge command:
var logic = '{ignore_early_media=true}user/1000@' + $pbx_domain + ':_:user/1001@' + $pbx_domain + ':_:user/1002@' + $pbx_domain; session.execute('bridge', logic);
The problem ended up stemming from me ringing all three at once using the :_: to join the extensions. I switched it over to commas:
var logic = '{ignore_early_media=true}user/1000@' + $pbx_domain + ',user/1001@' + $pbx_domain + ',user/1002@' + $pbx_domain; session.execute('bridge', logic);
and now the Diversion header shows up as expected. We shouldn't have multiple registrations for any of those numbers, so it shouldn't be an issue.
Thanks everyone for taking a look.
Out of curiosity, what is the "direct method" for setting the SIP header (instead of using session.execute)? I can't seem to find anything in the documentation.
Thanks again,
On Wed, May 23, 2018 at 10:26 AM, Michael Jerris <mike@jerris.com> wrote:
I’d avoid using the bridge function like this, but worthwhile to set the variable using the direct method instead of session execute for set application.
On May 22, 2018, at 5:01 PM, Branden Jordan <BJordan@E-Teleco.com> wrote:
I don’t see any reason why that wouldn’t work but maybe there is something weird going on with the javascript session object where it isn’t getting/setting the exported variables from the session when you are doing the bridge? Have you tried making a new session object and setting your variables for that session object instead of doing a session.execute? I found something like this on the Wiki that you might be able to do, small example below.
var anotherSession = new Session(session, '{ignore_ early_media=true}user/1003@' + $pbx_domain); anotherSession.execute(‘set’,diversionHeader); bridge(session, anotherSession); anotherSession.hangup();
Like I said earlier I am a bit rusty on the Javascript side, (no idea if bridge blocks or if you have to do a loop) but I know that would work on the LUA side which is where I am more familiar. I know Javascript examples are a little light on the wiki but you might be able to get the gist of what is going on in the LUA side and then mimic that in Javascript. https://freeswitch.org/confluence/display/FREESWITCH/Lua+example+ Bridging+two+calls+with+retry
Thanks,
Branden Jordan
*From:* FreeSWITCH-users <freeswitch-users-bounces@lists.freeswitch.org> *On Behalf Of *Preston Hagar *Sent:* Monday, May 21, 2018 6:53 PM *To:* FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> *Subject:* Re: [Freeswitch-users] Adding SIP Headers in Javascript
Thanks for responding!
Below is a bit more code to fill in the gaps. I'm passing the destination_number from the XML as a third argument. When I test out the code below, the console_log does in fact print out a "correct" Diversion header line. If I use the exact same Diversion header, set in my XML dialplan, it shows up in the SIP packet and the VOP software reads it. When I set it using session.execute in javascript, then no Diversion header, even an incorrect one, gets added to the SIP packet.
I don't think it is in the variable substitution or anything like that. I've also tried not passing a variable to session.execute and just putting the string in the command, as well as just hard coding a test number. In all cases, no Diversion header ever shows up. Either I'm not setting it right for javascript or there is something different about setting it in Javascript vs XML that I haven't figured out.
Here is more expanded code:
var $extension = argv[0]; var $pbx_domain = argv[1]; var $destination_number = argv[2];
var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@ pbx.example.org>;privacy=off;reason=unconditional;counter=1;screen=no';
session.execute('set',diversionHeader); session.execute('export','sip_h_Diversion');
onsole_log("notice","Trying receptionist"); console_log("notice",session.state); console_log("notice",diversionHeader); session.execute('set', 'call_timeout=15');
var logic = '{ignore_early_media=true}user/1003@' + $pbx_domain; session.execute('bridge', logic);
console_log("notice","Trying Kim"); console_log("notice",session.state); session.execute('set', 'call_timeout=10'); session.execute('bridge', 'user/2741@' + $pbx_domain);
// No one answered, send to IVR
console_log("notice","No one is answering"); console_log("notice",session.state); if (session.state == "CS_EXECUTE") { console_log("notice","Trying IVR"); session.execute('transfer', 'ivr'); }
On Mon, May 21, 2018 at 6:57 PM, Branden Jordan <BJordan@e-teleco.com> wrote:
Not sure if you still need help with this but could you post some more of your javascript code? Something about this line is off to me but maybe it makes sense in the grander scheme of things. var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@pbx.example.org>;privacy=off;reason=unconditional;counter= 1;screen=no';
I have not used javascript with freeswitch in a little while, so I might be totally wrong but did you declare $destination_number? Because its possible its undefined if you didn’t declare that specifically equal to the value you passed in via args and thus javascript does you a solid and makes the whole string undefined which sets the sip_h_Diversion to null which is why it isn’t exporting. Maybe try argv[3] or argv[2] (console them out I am not sure which one it’ll be) instead of $destination_number in your concatenation?
If that isn’t it and you are still having an issue we can try some other stuff.
Thanks, Branden Jordan
*From:* FreeSWITCH-users <freeswitch-users-bounces@lists.freeswitch.org> *On Behalf Of *Preston Hagar *Sent:* Friday, May 18, 2018 8:55 AM *To:* FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> *Subject:* [Freeswitch-users] Adding SIP Headers in Javascript
Quick Version: Is there some special way to set custom SIP headers when you are bridging a call from Javascript instead of XML?
Full Details: We am using Voice Operator Panel (VOP) as a receptionist console. We have multiple external numbers that all funnel into a few receptionist desks. If I add a SIP Diversion header, then VOP will use that to show the receptionist which number the caller dialed to reach them, which would help things out a lot.
If I add it in an XML dialplan and then do a direct bridge to one of the receptionist numbers, it works great (snip of working direct dialplan):
<action application="set" data="sip_h_Diversion=<sip:${d estination_number}@pbx.example.org>;privacy=off;reason= unconditional;counter=1;screen=no"/> <action application="bridge" data="user/1000@pbx.example.org"/>
The problem is I need a bit of advanced logic to figure out which receptionist are online and then ring those, then fail over to other numbers and ultimately IVR if no one answers, so I instead pass calls to them off to javascript, so the bridge line above becomes something link:
<action application="javascript" data="${jslib}/frontdesk.js ${dialed_extension} ${domain_name} ${destination_number}" />
I've tried setting the SIP header in the XML above the javascript line and then exporting it <action application="set" data="sip_h_Diversion=<sip:${d estination_number}@pbx.example.org>;privacy=off;reason= unconditional;counter=1;screen=no"/>
<action application="export" data="sip_h_Diversion" />
and setting it in the Javascript:
var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@pbx.example.org>;privacy=off;reason=unconditional;counter= 1;screen=no';
session.execute('set',diversionHeader); session.execute('export','sip_h_Diversion');
but in both cases (or with both in place), the SIP header is never written.
Is there some magic to setting SIP headers in Javascript? I can't seem to find any examples or documentation about it.
Thanks!
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Glad to hear you found a fix, thanks for posting back. From: FreeSWITCH-users <freeswitch-users-bounces@lists.freeswitch.org> On Behalf Of Preston Hagar Sent: Wednesday, May 23, 2018 10:46 AM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] Adding SIP Headers in Javascript I figured out my issue. I had left out part of my code in previous emails to try to make it simpler, and left out the part that was messing things up. So after I set the sip Diversion header: var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@pbx.example.org<http://pbx.example.org>>;privacy=off;reason=unconditional;counter=1;screen=no'; session.execute('set',diversionHeader); I would set a timeout: session.execute('set', 'call_timeout=45'); Then I would ring all three receptionist stations at once with a bridge command: var logic = '{ignore_early_media=true}user/1000@' + $pbx_domain + ':_:user/1001@' + $pbx_domain + ':_:user/1002@' + $pbx_domain; session.execute('bridge', logic); The problem ended up stemming from me ringing all three at once using the :_: to join the extensions. I switched it over to commas: var logic = '{ignore_early_media=true}user/1000@' + $pbx_domain + ',user/1001@' + $pbx_domain + ',user/1002@' + $pbx_domain; session.execute('bridge', logic); and now the Diversion header shows up as expected. We shouldn't have multiple registrations for any of those numbers, so it shouldn't be an issue. Thanks everyone for taking a look. Out of curiosity, what is the "direct method" for setting the SIP header (instead of using session.execute)? I can't seem to find anything in the documentation. Thanks again, On Wed, May 23, 2018 at 10:26 AM, Michael Jerris <mike@jerris.com<mailto:mike@jerris.com>> wrote: I’d avoid using the bridge function like this, but worthwhile to set the variable using the direct method instead of session execute for set application. On May 22, 2018, at 5:01 PM, Branden Jordan <BJordan@E-Teleco.com<mailto:BJordan@E-Teleco.com>> wrote: I don’t see any reason why that wouldn’t work but maybe there is something weird going on with the javascript session object where it isn’t getting/setting the exported variables from the session when you are doing the bridge? Have you tried making a new session object and setting your variables for that session object instead of doing a session.execute? I found something like this on the Wiki that you might be able to do, small example below. var anotherSession = new Session(session, '{ignore_early_media=true}user/1003@' + $pbx_domain); anotherSession.execute(‘set’,diversionHeader); bridge(session, anotherSession); anotherSession.hangup(); Like I said earlier I am a bit rusty on the Javascript side, (no idea if bridge blocks or if you have to do a loop) but I know that would work on the LUA side which is where I am more familiar. I know Javascript examples are a little light on the wiki but you might be able to get the gist of what is going on in the LUA side and then mimic that in Javascript. https://freeswitch.org/confluence/display/FREESWITCH/Lua+example+Bridging+tw... Thanks, Branden Jordan From: FreeSWITCH-users <freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org>> On Behalf Of Preston Hagar Sent: Monday, May 21, 2018 6:53 PM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org<mailto:freeswitch-users@lists.freeswitch.org>> Subject: Re: [Freeswitch-users] Adding SIP Headers in Javascript Thanks for responding! Below is a bit more code to fill in the gaps. I'm passing the destination_number from the XML as a third argument. When I test out the code below, the console_log does in fact print out a "correct" Diversion header line. If I use the exact same Diversion header, set in my XML dialplan, it shows up in the SIP packet and the VOP software reads it. When I set it using session.execute in javascript, then no Diversion header, even an incorrect one, gets added to the SIP packet. I don't think it is in the variable substitution or anything like that. I've also tried not passing a variable to session.execute and just putting the string in the command, as well as just hard coding a test number. In all cases, no Diversion header ever shows up. Either I'm not setting it right for javascript or there is something different about setting it in Javascript vs XML that I haven't figured out. Here is more expanded code: var $extension = argv[0]; var $pbx_domain = argv[1]; var $destination_number = argv[2]; var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@pbx.example.org<http://pbx.example.org/>>;privacy=off;reason=unconditional;counter=1;screen=no'; session.execute('set',diversionHeader); session.execute('export','sip_h_Diversion'); onsole_log("notice","Trying receptionist"); console_log("notice",session.state); console_log("notice",diversionHeader); session.execute('set', 'call_timeout=15'); var logic = '{ignore_early_media=true}user/1003@' + $pbx_domain; session.execute('bridge', logic); console_log("notice","Trying Kim"); console_log("notice",session.state); session.execute('set', 'call_timeout=10'); session.execute('bridge', 'user/2741@' + $pbx_domain); // No one answered, send to IVR console_log("notice","No one is answering"); console_log("notice",session.state); if (session.state == "CS_EXECUTE") { console_log("notice","Trying IVR"); session.execute('transfer', 'ivr'); } On Mon, May 21, 2018 at 6:57 PM, Branden Jordan <BJordan@e-teleco.com<mailto:BJordan@e-teleco.com>> wrote: Not sure if you still need help with this but could you post some more of your javascript code? Something about this line is off to me but maybe it makes sense in the grander scheme of things. var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@pbx.example.org<http://pbx.example.org/>>;privacy=off;reason=unconditional;counter=1;screen=no'; I have not used javascript with freeswitch in a little while, so I might be totally wrong but did you declare $destination_number? Because its possible its undefined if you didn’t declare that specifically equal to the value you passed in via args and thus javascript does you a solid and makes the whole string undefined which sets the sip_h_Diversion to null which is why it isn’t exporting. Maybe try argv[3] or argv[2] (console them out I am not sure which one it’ll be) instead of $destination_number in your concatenation? If that isn’t it and you are still having an issue we can try some other stuff. Thanks, Branden Jordan From: FreeSWITCH-users <freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org>> On Behalf Of Preston Hagar Sent: Friday, May 18, 2018 8:55 AM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org<mailto:freeswitch-users@lists.freeswitch.org>> Subject: [Freeswitch-users] Adding SIP Headers in Javascript Quick Version: Is there some special way to set custom SIP headers when you are bridging a call from Javascript instead of XML? Full Details: We am using Voice Operator Panel (VOP) as a receptionist console. We have multiple external numbers that all funnel into a few receptionist desks. If I add a SIP Diversion header, then VOP will use that to show the receptionist which number the caller dialed to reach them, which would help things out a lot. If I add it in an XML dialplan and then do a direct bridge to one of the receptionist numbers, it works great (snip of working direct dialplan): <action application="set" data="sip_h_Diversion=<sip:${destination_number}@pbx.example.org<mailto:destination_number%7D@pbx.example.org>>;privacy=off;reason=unconditional;counter=1;screen=no"/> <action application="bridge" data="user/1000@pbx.example.org<mailto:1000@pbx.example.org>"/> The problem is I need a bit of advanced logic to figure out which receptionist are online and then ring those, then fail over to other numbers and ultimately IVR if no one answers, so I instead pass calls to them off to javascript, so the bridge line above becomes something link: <action application="javascript" data="${jslib}/frontdesk.js ${dialed_extension} ${domain_name} ${destination_number}" /> I've tried setting the SIP header in the XML above the javascript line and then exporting it <action application="set" data="sip_h_Diversion=<sip:${destination_number}@pbx.example.org<mailto:destination_number%7D@pbx.example.org>>;privacy=off;reason=unconditional;counter=1;screen=no"/> <action application="export" data="sip_h_Diversion" /> and setting it in the Javascript: var diversionHeader = 'sip_h_Diversion=<sip:' + $destination_number + '@pbx.example.org<http://pbx.example.org/>>;privacy=off;reason=unconditional;counter=1;screen=no'; session.execute('set',diversionHeader); session.execute('export','sip_h_Diversion'); but in both cases (or with both in place), the SIP header is never written. Is there some magic to setting SIP headers in Javascript? I can't seem to find any examples or documentation about it. Thanks! _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (4)
-
Branden Jordan
-
Joel Serrano
-
Michael Jerris
-
Preston Hagar