how to make FS to listen for 2 RTP streams on one call ?
Hello all, I'm trying to implement this (shown in the picture) scenario, but to use FS instead of OrekaTR: There are several small bumps on the road, which I successfully overcame, but finally I met a challenge which is bigger, than my skills, so I need the community help. The problem is, that RtpProxy can't mix the media, so instead of one mixed stream on the forked call, I have 2 separate RTP streams. I have no idea how to make FS to listen both of them. Is this possible and how? Any advice is highly appreciated. Best! Evtim
Does RTP proxy use same IP address/port to send/receive the two RTP streams? /Kaiduan On Wednesday, May 16, 2018, 8:37:29 a.m. EDT, Evtim Ivanov <ivanov.evtim@gmail.com> wrote: Hello all, I'm trying to implement this (shown in the picture) scenario, but to use FS instead of OrekaTR: There are several small bumps on the road, which I successfully overcame, but finally I met a challenge which is bigger, than my skills, so I need the community help. The problem is, that RtpProxy can't mix the media, so instead of one mixed stream on the forked call, I have 2 separate RTP streams. I have no idea how to make FS to listen both of them. Is this possible and how?Any advice is highly appreciated. Best!Evtim _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Its not possible currently to handle multiple media streams for one call.
On May 15, 2018, at 1:36 PM, Evtim Ivanov <ivanov.evtim@gmail.com> wrote:
Hello all,
I'm trying to implement this (shown in the picture) scenario, but to use FS instead of OrekaTR: <siprec-architecture.png>
There are several small bumps on the road, which I successfully overcame, but finally I met a challenge which is bigger, than my skills, so I need the community help. The problem is, that RtpProxy can't mix the media, so instead of one mixed stream on the forked call, I have 2 separate RTP streams. I have no idea how to make FS to listen both of them. Is this possible and how? Any advice is highly appreciated.
Best! Evtim
Hi, Why you need OrekaTR/freeswitch at all? Rtpproxy should be able to do recording. With kind regards, Jurijs On Wed, May 16, 2018 at 4:17 PM, Michael Jerris <mike@jerris.com> wrote:
Its not possible currently to handle multiple media streams for one call.
On May 15, 2018, at 1:36 PM, Evtim Ivanov <ivanov.evtim@gmail.com> wrote:
Hello all,
I'm trying to implement this (shown in the picture) scenario, but to use FS instead of OrekaTR: <siprec-architecture.png>
There are several small bumps on the road, which I successfully overcame, but finally I met a challenge which is bigger, than my skills, so I need the community help. The problem is, that RtpProxy can't mix the media, so instead of one mixed stream on the forked call, I have 2 separate RTP streams. I have no idea how to make FS to listen both of them. Is this possible and how? Any advice is highly appreciated.
Best! Evtim
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Have you looked into mod_oreka for FS? Guillermo On Wed, May 16, 2018 at 10:20 AM, Jurijs Ivolga <jurijs.ivolga@gmail.com> wrote:
Hi,
Why you need OrekaTR/freeswitch at all? Rtpproxy should be able to do recording.
With kind regards,
Jurijs
On Wed, May 16, 2018 at 4:17 PM, Michael Jerris <mike@jerris.com> wrote:
Its not possible currently to handle multiple media streams for one call.
On May 15, 2018, at 1:36 PM, Evtim Ivanov <ivanov.evtim@gmail.com> wrote:
Hello all,
I'm trying to implement this (shown in the picture) scenario, but to use FS instead of OrekaTR: <siprec-architecture.png>
There are several small bumps on the road, which I successfully overcame, but finally I met a challenge which is bigger, than my skills, so I need the community help. The problem is, that RtpProxy can't mix the media, so instead of one mixed stream on the forked call, I have 2 separate RTP streams. I have no idea how to make FS to listen both of them. Is this possible and how? Any advice is highly appreciated.
Best! Evtim
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Guillermo Ruiz Camauer
That absolutely doesn't do what you think it does. /b On Wed, May 16, 2018 at 10:22 AM, Guillermo Ruiz Camauer < grcamauer@gmail.com> wrote:
Have you looked into mod_oreka for FS?
Guillermo
On Wed, May 16, 2018 at 10:20 AM, Jurijs Ivolga <jurijs.ivolga@gmail.com> wrote:
Hi,
Why you need OrekaTR/freeswitch at all? Rtpproxy should be able to do recording.
With kind regards,
Jurijs
On Wed, May 16, 2018 at 4:17 PM, Michael Jerris <mike@jerris.com> wrote:
Its not possible currently to handle multiple media streams for one call.
On May 15, 2018, at 1:36 PM, Evtim Ivanov <ivanov.evtim@gmail.com> wrote:
Hello all,
I'm trying to implement this (shown in the picture) scenario, but to use FS instead of OrekaTR: <siprec-architecture.png>
There are several small bumps on the road, which I successfully overcame, but finally I met a challenge which is bigger, than my skills, so I need the community help. The problem is, that RtpProxy can't mix the media, so instead of one mixed stream on the forked call, I have 2 separate RTP streams. I have no idea how to make FS to listen both of them. Is this possible and how? Any advice is highly appreciated.
Best! Evtim
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Guillermo Ruiz Camauer
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Brian West | Co-founder and Developer Need Commercial support? email sales@freeswitch.com FreeSWITCH Solutions | 17345 Civic Drive #2531 Brookfield, WI 53045 <https://maps.google.com/?q=17345+Civic+Drive+%232531+Brookfield,+WI+53045&entry=gmail&source=g> Email: brian@freeswitch.com Mobile: 918-424-9378 Website: https://www.FreeSWITCH.com <https://www.freeswitch.com/> [image: https://www.facebook.com/signalwireinc?src=email] <https://www.facebook.com/freeswitch> [image: https://twitter.com/freeswitch] <https://twitter.com/freeswitch>
Hi Jurijs, I don't know if it is possible and how to record in Rtpproxy. If I exhaust all FS related options, probably will give it a try, but it would have been nice, if it was possible to do it with the FS, as there is some business logic for those recordings there already. Best, Evtim On 16 May 2018 at 14:20, Jurijs Ivolga <jurijs.ivolga@gmail.com> wrote:
Hi,
Why you need OrekaTR/freeswitch at all? Rtpproxy should be able to do recording.
With kind regards,
Jurijs
On Wed, May 16, 2018 at 4:17 PM, Michael Jerris <mike@jerris.com> wrote:
Its not possible currently to handle multiple media streams for one call.
On May 15, 2018, at 1:36 PM, Evtim Ivanov <ivanov.evtim@gmail.com> wrote:
Hello all,
I'm trying to implement this (shown in the picture) scenario, but to use FS instead of OrekaTR: <siprec-architecture.png>
There are several small bumps on the road, which I successfully overcame, but finally I met a challenge which is bigger, than my skills, so I need the community help. The problem is, that RtpProxy can't mix the media, so instead of one mixed stream on the forked call, I have 2 separate RTP streams. I have no idea how to make FS to listen both of them. Is this possible and how? Any advice is highly appreciated.
Best! Evtim
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi, I don't know your requirements, but I think you do not need both Rtpproxy and Freeswitch. Spend some time on design and it will save you some time later. If you need some functionality what freeswtich has only, drop rtpproxy and use freeswitch only, I don't see a point to have them both. With kind regards, Jurijs On Wed, May 16, 2018 at 10:23 PM, Evtim Ivanov <ivanov.evtim@gmail.com> wrote:
Hi Jurijs,
I don't know if it is possible and how to record in Rtpproxy. If I exhaust all FS related options, probably will give it a try, but it would have been nice, if it was possible to do it with the FS, as there is some business logic for those recordings there already.
Best, Evtim
On 16 May 2018 at 14:20, Jurijs Ivolga <jurijs.ivolga@gmail.com> wrote:
Hi,
Why you need OrekaTR/freeswitch at all? Rtpproxy should be able to do recording.
With kind regards,
Jurijs
On Wed, May 16, 2018 at 4:17 PM, Michael Jerris <mike@jerris.com> wrote:
Its not possible currently to handle multiple media streams for one call.
On May 15, 2018, at 1:36 PM, Evtim Ivanov <ivanov.evtim@gmail.com> wrote:
Hello all,
I'm trying to implement this (shown in the picture) scenario, but to use FS instead of OrekaTR: <siprec-architecture.png>
There are several small bumps on the road, which I successfully overcame, but finally I met a challenge which is bigger, than my skills, so I need the community help. The problem is, that RtpProxy can't mix the media, so instead of one mixed stream on the forked call, I have 2 separate RTP streams. I have no idea how to make FS to listen both of them. Is this possible and how? Any advice is highly appreciated.
Best! Evtim
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
This doesn't support SIP forking but if you are forking the call from inside FS you can do something like {bridge_early_media=true}sofia/internal/bob1@gateway.com,sofia/internal/ bob2@gateway.com If they both have early media at the same time it will mux it, some people use this to play strange music from another server super-imposed over the other ringing. On Wed, May 16, 2018 at 2:39 PM, Jurijs Ivolga <jurijs.ivolga@gmail.com> wrote:
Hi,
I don't know your requirements, but I think you do not need both Rtpproxy and Freeswitch. Spend some time on design and it will save you some time later. If you need some functionality what freeswtich has only, drop rtpproxy and use freeswitch only, I don't see a point to have them both.
With kind regards,
Jurijs
On Wed, May 16, 2018 at 10:23 PM, Evtim Ivanov <ivanov.evtim@gmail.com> wrote:
Hi Jurijs,
I don't know if it is possible and how to record in Rtpproxy. If I exhaust all FS related options, probably will give it a try, but it would have been nice, if it was possible to do it with the FS, as there is some business logic for those recordings there already.
Best, Evtim
On 16 May 2018 at 14:20, Jurijs Ivolga <jurijs.ivolga@gmail.com> wrote:
Hi,
Why you need OrekaTR/freeswitch at all? Rtpproxy should be able to do recording.
With kind regards,
Jurijs
On Wed, May 16, 2018 at 4:17 PM, Michael Jerris <mike@jerris.com> wrote:
Its not possible currently to handle multiple media streams for one call.
On May 15, 2018, at 1:36 PM, Evtim Ivanov <ivanov.evtim@gmail.com> wrote:
Hello all,
I'm trying to implement this (shown in the picture) scenario, but to use FS instead of OrekaTR: <siprec-architecture.png>
There are several small bumps on the road, which I successfully overcame, but finally I met a challenge which is bigger, than my skills, so I need the community help. The problem is, that RtpProxy can't mix the media, so instead of one mixed stream on the forked call, I have 2 separate RTP streams. I have no idea how to make FS to listen both of them. Is this possible and how? Any advice is highly appreciated.
Best! Evtim
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/free switch-users http://www.freeswitch.org
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II Founder, FreeSWITCH. http://freeswitch.com https://youtu.be/l_hOxzCt6X4 https://www.youtube.com/watch?v=oAxXgyx5jUw https://www.youtube.com/watch?v=9XXgW34t40s https://www.youtube.com/watch?v=NLaDpGQuZDA
Thank you Anthony! Interesting to know. Best, Evtim On 16 May 2018 at 22:59, Anthony Minessale <anthony.minessale@gmail.com> wrote:
This doesn't support SIP forking but if you are forking the call from inside FS you can do something like
{bridge_early_media=true}sofia/internal/bob1@gateway.com,sofia/internal/ bob2@gateway.com
If they both have early media at the same time it will mux it, some people use this to play strange music from another server super-imposed over the other ringing.
On Wed, May 16, 2018 at 2:39 PM, Jurijs Ivolga <jurijs.ivolga@gmail.com> wrote:
Hi,
I don't know your requirements, but I think you do not need both Rtpproxy and Freeswitch. Spend some time on design and it will save you some time later. If you need some functionality what freeswtich has only, drop rtpproxy and use freeswitch only, I don't see a point to have them both.
With kind regards,
Jurijs
On Wed, May 16, 2018 at 10:23 PM, Evtim Ivanov <ivanov.evtim@gmail.com> wrote:
Hi Jurijs,
I don't know if it is possible and how to record in Rtpproxy. If I exhaust all FS related options, probably will give it a try, but it would have been nice, if it was possible to do it with the FS, as there is some business logic for those recordings there already.
Best, Evtim
On 16 May 2018 at 14:20, Jurijs Ivolga <jurijs.ivolga@gmail.com> wrote:
Hi,
Why you need OrekaTR/freeswitch at all? Rtpproxy should be able to do recording.
With kind regards,
Jurijs
On Wed, May 16, 2018 at 4:17 PM, Michael Jerris <mike@jerris.com> wrote:
Its not possible currently to handle multiple media streams for one call.
On May 15, 2018, at 1:36 PM, Evtim Ivanov <ivanov.evtim@gmail.com> wrote:
Hello all,
I'm trying to implement this (shown in the picture) scenario, but to use FS instead of OrekaTR: <siprec-architecture.png>
There are several small bumps on the road, which I successfully overcame, but finally I met a challenge which is bigger, than my skills, so I need the community help. The problem is, that RtpProxy can't mix the media, so instead of one mixed stream on the forked call, I have 2 separate RTP streams. I have no idea how to make FS to listen both of them. Is this possible and how? Any advice is highly appreciated.
Best! Evtim
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/free switch-users http://www.freeswitch.org
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/free switch-users http://www.freeswitch.org
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II Founder, FreeSWITCH. http://freeswitch.com
https://youtu.be/l_hOxzCt6X4 https://www.youtube.com/watch?v=oAxXgyx5jUw https://www.youtube.com/watch?v=9XXgW34t40s https://www.youtube.com/watch?v=NLaDpGQuZDA
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thank you Michael! That's what I hoped for - unambiguous answer, was it even negative. Fair enough. Now I know this is dead end. Best, Evtim On 16 May 2018 at 14:17, Michael Jerris <mike@jerris.com> wrote:
Its not possible currently to handle multiple media streams for one call.
On May 15, 2018, at 1:36 PM, Evtim Ivanov <ivanov.evtim@gmail.com> wrote:
Hello all,
I'm trying to implement this (shown in the picture) scenario, but to use FS instead of OrekaTR: <siprec-architecture.png>
There are several small bumps on the road, which I successfully overcame, but finally I met a challenge which is bigger, than my skills, so I need the community help. The problem is, that RtpProxy can't mix the media, so instead of one mixed stream on the forked call, I have 2 separate RTP streams. I have no idea how to make FS to listen both of them. Is this possible and how? Any advice is highly appreciated.
Best! Evtim
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hello FS community, I'm completely new in FreeSWITCH (working now with open source version 1.6). I'm searching for answers in documentation but in some cases it is too large to find quickly what I need. I have added into etc/freeswitch/dialplan/default.xml configuration then new element <extension ...> intentionally without closing </extension> at the end. Doing reloadxml command in fs_cli I can see freeswitch@debianfs> reloadxml +OK [[error near line 7707]: unexpected closing tag </context>] Please, is there any way to get more info about such error? Mainly I'm interesting which configuration file is invalid. Are there any logs with more detailed info about trouble? Thank you in advance for any answer. Regards Petr B.
Hi Petr, You must close all tags or you are not generating valid XML. This error is telling you it didn’t expect to see the </context> before the </extension> you left out. The XML dial plan guide is your friend. https://freeswitch.org/confluence/display/FREESWITCH/XML+Dialplan From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Petr Both Sent: Thursday, May 17, 2018 01:48 To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] More info about invalid xml configuration file. Hello FS community, I'm completely new in FreeSWITCH (working now with open source version 1.6). I'm searching for answers in documentation but in some cases it is too large to find quickly what I need. I have added into etc/freeswitch/dialplan/default.xml configuration then new element <extension ...> intentionally without closing </extension> at the end. Doing reloadxml command in fs_cli I can see freeswitch@debianfs> reloadxml +OK [[error near line 7707]: unexpected closing tag </context>] Please, is there any way to get more info about such error? Mainly I'm interesting which configuration file is invalid. Are there any logs with more detailed info about trouble? Thank you in advance for any answer. Regards Petr B.
Hi, You can find the complete generated XML file in /var/log/freeswitch/freeswitch.xml.fsxml. Your error says the error is near line 7707 of this file. Be careful: you can open this file but DO NOT try to edit it :) If you open this file with an editor that support xml syntax coloration (vim/sublime text), then that's quite easy to find where error is. Alexis Le 17/05/2018 à 10:48, Petr Both a écrit :
Hello FS community,
I'm completely new in FreeSWITCH (working now with open source version 1.6). I'm searching for answers in documentation but in some cases it is too large to find quickly what I need.
I have added into etc/freeswitch/dialplan/default.xml configuration then new element <extension ...> intentionally without closing </extension> at the end. Doing reloadxml command in fs_cli I can see
freeswitch@debianfs> reloadxml +OK [[error near line 7707]: unexpected closing tag </context>]
Please, is there any way to get more info about such error? Mainly I'm interesting which configuration file is invalid. Are there any logs with more detailed info about trouble?
Thank you in advance for any answer.
Regards Petr B.
Hi Alexis, Thank you very much, this is very useful info. If I understand correctly the whole FS configuration is during reloadxml "copied" to freeswitch.xml.fsxml and then it is evaluated and if necessary the error report is generated to CLI. Related line value is reported in this message and is related to freeswitch.xml.fsxml. Regards Petr B. Dne 18.05.2018 v 20:20 Alexis napsal(a):
Hi,
You can find the complete generated XML file in /var/log/freeswitch/freeswitch.xml.fsxml. Your error says the error is near line 7707 of this file. Be careful: you can open this file but DO NOT try to edit it :)
If you open this file with an editor that support xml syntax coloration (vim/sublime text), then that's quite easy to find where error is.
Alexis Le 17/05/2018 à 10:48, Petr Both a écrit :
Hello FS community,
I'm completely new in FreeSWITCH (working now with open source version 1.6). I'm searching for answers in documentation but in some cases it is too large to find quickly what I need.
I have added into etc/freeswitch/dialplan/default.xml configuration then new element <extension ...> intentionally without closing </extension> at the end. Doing reloadxml command in fs_cli I can see
freeswitch@debianfs> reloadxml +OK [[error near line 7707]: unexpected closing tag </context>]
Please, is there any way to get more info about such error? Mainly I'm interesting which configuration file is invalid. Are there any logs with more detailed info about trouble?
Thank you in advance for any answer.
Regards Petr B.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
That's it. You can find more informations here : https://freeswitch.org/confluence/display/FREESWITCH/Configuring+FreeSWITCH#... Alexis Le 21/05/2018 à 11:11, Petr Both a écrit :
Hi Alexis,
Thank you very much, this is very useful info.
If I understand correctly the whole FS configuration is during reloadxml "copied" to freeswitch.xml.fsxml and then it is evaluated and if necessary the error report is generated to CLI. Related line value is reported in this message and is related to freeswitch.xml.fsxml.
Regards Petr B.
Dne 18.05.2018 v 20:20 Alexis napsal(a):
Hi,
You can find the complete generated XML file in /var/log/freeswitch/freeswitch.xml.fsxml. Your error says the error is near line 7707 of this file. Be careful: you can open this file but DO NOT try to edit it :)
If you open this file with an editor that support xml syntax coloration (vim/sublime text), then that's quite easy to find where error is.
Alexis Le 17/05/2018 à 10:48, Petr Both a écrit :
Hello FS community,
I'm completely new in FreeSWITCH (working now with open source version 1.6). I'm searching for answers in documentation but in some cases it is too large to find quickly what I need.
I have added into etc/freeswitch/dialplan/default.xml configuration then new element <extension ...> intentionally without closing </extension> at the end. Doing reloadxml command in fs_cli I can see
freeswitch@debianfs> reloadxml +OK [[error near line 7707]: unexpected closing tag </context>]
Please, is there any way to get more info about such error? Mainly I'm interesting which configuration file is invalid. Are there any logs with more detailed info about trouble?
Thank you in advance for any answer.
Regards Petr B.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thank you for your question! We answered it live on ClueCon weekly today! You can watch it at https://www.youtube.com/watch?v=K-k6qHfzlp4 <https://www.youtube.com/watch?v=K-k6qHfzlp4>
On May 17, 2018, at 4:48 AM, Petr Both <both@antek.it> wrote:
Hello FS community,
I'm completely new in FreeSWITCH (working now with open source version 1.6). I'm searching for answers in documentation but in some cases it is too large to find quickly what I need.
I have added into etc/freeswitch/dialplan/default.xml configuration then new element <extension ...> intentionally without closing </extension> at the end. Doing reloadxml command in fs_cli I can see
freeswitch@debianfs> reloadxml +OK [[error near line 7707]: unexpected closing tag </context>]
Please, is there any way to get more info about such error? Mainly I'm interesting which configuration file is invalid. Are there any logs with more detailed info about trouble?
Thank you in advance for any answer.
participants (10)
-
Alexis
-
Anthony Minessale
-
Brian West
-
Evtim Ivanov
-
Garrett Allen
-
Guillermo Ruiz Camauer
-
Jurijs Ivolga
-
kaiduan xie
-
Michael Jerris
-
Petr Both