Freeswitch & double NAT Configuration (Was: USER_NOT_REGISTERED with external profile)
Hi Everybody, I am trying to get a conversation between two natted clients and a natted freeswitch server. I am playing with a fresh install, the external profile and default directory (1000 & 1001 users). I can see that my clients are registered on the server logs (on the 5080 port). All others needed ports are opened too. I have followed the instructions from the wiki to get a double nat configuration, but my client phone are not ringing (and I cannot hear anything). All is working fine with defaults in a non nat configuration (with internal profile). Is there anything special to set up in the directory / user configuration ? Can anyone give me some hints with his natted configuration ? I am stuck. Thanks for your help. Regards, -------- Original Message -------- Subject: [Freeswitch-users] USER_NOT_REGISTERED with external profile Date: Mon, 16 Jan 2012 23:37:20 +0100 From: Alexis de BRUYN [Mailinglists] <alexis.mailinglist@de-bruyn.fr> Reply-To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> To: freeswitch-users@lists.freeswitch.org Hi Everybody, I am trying to use FreeSwitch in a (double) NAT Configuration from a fresh snapshot install (Debian Squeeze, server outside from my client LAN) with default directory for users. When I call 1001 from 1000 (or 1000 from 1001) , I cannot hear the callee, the phone doesn't ring and automatically hangup, I see in the console : 2012-01-16 22:59:37.691663 [ERR] switch_ivr_originate.c:2447 Cannot create outgoing channel of type [error] cause: [USER_NOT_REGISTERED] 2012-01-16 22:59:37.691663 [ERR] switch_ivr_originate.c:2447 Cannot create outgoing channel of type [user] cause: [USER_NOT_REGISTERED] However, 1000 and 1001 are registered (from the same LAN) : sofia status profile external ================================================================================================= Name external Domain Name N/A Auto-NAT false DBName sofia_reg_external Pres Hosts Dialplan XML Context public Challenge Realm auto_to RTP-IP 192.168.1.6 SIP-IP 192.168.1.6 URL sip:mod_sofia@192.168.1.6:5080 BIND-URL sip:mod_sofia@192.168.1.6:5080 HOLD-MUSIC local_stream://moh OUTBOUND-PROXY N/A CODECS IN G7221@32000h,G7221@16000h,G722,PCMU,PCMA,GSM CODECS OUT PCMU,PCMA,GSM TEL-EVENT 101 DTMF-MODE rfc2833 CNG 13 SESSION-TO 0 MAX-DIALOG 0 NOMEDIA false LATE-NEG false PROXY-MEDIA false AGGRESSIVENAT false STUN-ENABLED true STUN-AUTO-DISABLE false CALLS-IN 3 FAILED-CALLS-IN 0 CALLS-OUT 0 FAILED-CALLS-OUT 0 Registrations: ================================================================================================= Call-ID: aU.1ZlEZkW7nlHpwp9ig1lt7A3weNnwm User: 1001@X.Y.Z.T Contact: "Freeswitch" <sip:1001@A.B.C.D:50193> Agent: Bria iOS 2.0.0 Status: Registered(UDP)(unknown) EXP(2012-01-16 23:16:00) EXPSECS(934) Host: phone IP: A.B.C.D Port: 50193 Auth-User: 1001 Auth-Realm: X.Y.Z.T MWI-Account: 1001@X.Y.Z.T Call-ID: 3c27b7424837-bsfi877ujb2n User: 1000@X.Y.Z.T Contact: "freeswitch" <sip:1000@192.168.0.69:2048;line=skgk4hug> Agent: snom300/8.4.32 Status: Registered(UDP)(unknown) EXP(2012-01-17 00:01:24) EXPSECS(3658) Host: phone IP: A.B.C.D Port: 62061 Auth-User: 1000 Auth-Realm: X.Y.Z.T MWI-Account: 1000@X.Y.Z.T Total items returned: 2 ================================================================================================= All necessary ports are opened/forwarded on the server. I See on the 1000 configuration that this is the local ip address which is set as contact. Is there any other setups to do in the directory ? Or other parameters in the external profile ? Thanks for your help ! Regards, -- Alexis de BRUYN Mail : alexis.mailinglist@de-bruyn.fr _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- -- Alexis de BRUYN Mail : alexis.mailinglist@de-bruyn.fr
Hi, I set mine up for the external phones to log into the internal profile and it just worked (port 5060). But it might depend on the type of NAT or something, I'm by no means an expert on the subject. Probably worth securing it better than the default config once you get it going if it works on the internal profile. Ryan On 18/01/2012 5:04 AM, Alexis de BRUYN [Mailinglists] wrote:
Hi Everybody,
I am trying to get a conversation between two natted clients and a natted freeswitch server. I am playing with a fresh install, the external profile and default directory (1000& 1001 users).
I can see that my clients are registered on the server logs (on the 5080 port). All others needed ports are opened too.
I have followed the instructions from the wiki to get a double nat configuration, but my client phone are not ringing (and I cannot hear anything).
All is working fine with defaults in a non nat configuration (with internal profile).
Is there anything special to set up in the directory / user configuration ?
Can anyone give me some hints with his natted configuration ? I am stuck.
Thanks for your help.
Regards,
-------- Original Message -------- Subject: [Freeswitch-users] USER_NOT_REGISTERED with external profile Date: Mon, 16 Jan 2012 23:37:20 +0100 From: Alexis de BRUYN [Mailinglists]<alexis.mailinglist@de-bruyn.fr> Reply-To: FreeSWITCH Users Help<freeswitch-users@lists.freeswitch.org> To: freeswitch-users@lists.freeswitch.org
Hi Everybody,
I am trying to use FreeSwitch in a (double) NAT Configuration from a fresh snapshot install (Debian Squeeze, server outside from my client LAN) with default directory for users.
When I call 1001 from 1000 (or 1000 from 1001) , I cannot hear the callee, the phone doesn't ring and automatically hangup, I see in the console :
2012-01-16 22:59:37.691663 [ERR] switch_ivr_originate.c:2447 Cannot create outgoing channel of type [error] cause: [USER_NOT_REGISTERED] 2012-01-16 22:59:37.691663 [ERR] switch_ivr_originate.c:2447 Cannot create outgoing channel of type [user] cause: [USER_NOT_REGISTERED]
However, 1000 and 1001 are registered (from the same LAN) :
sofia status profile external
================================================================================================= Name external Domain Name N/A Auto-NAT false DBName sofia_reg_external Pres Hosts Dialplan XML Context public Challenge Realm auto_to RTP-IP 192.168.1.6 SIP-IP 192.168.1.6 URL sip:mod_sofia@192.168.1.6:5080 BIND-URL sip:mod_sofia@192.168.1.6:5080 HOLD-MUSIC local_stream://moh OUTBOUND-PROXY N/A CODECS IN G7221@32000h,G7221@16000h,G722,PCMU,PCMA,GSM CODECS OUT PCMU,PCMA,GSM TEL-EVENT 101 DTMF-MODE rfc2833 CNG 13 SESSION-TO 0 MAX-DIALOG 0 NOMEDIA false LATE-NEG false PROXY-MEDIA false AGGRESSIVENAT false STUN-ENABLED true STUN-AUTO-DISABLE false CALLS-IN 3 FAILED-CALLS-IN 0 CALLS-OUT 0 FAILED-CALLS-OUT 0
Registrations: ================================================================================================= Call-ID: aU.1ZlEZkW7nlHpwp9ig1lt7A3weNnwm User: 1001@X.Y.Z.T Contact: "Freeswitch"<sip:1001@A.B.C.D:50193> Agent: Bria iOS 2.0.0 Status: Registered(UDP)(unknown) EXP(2012-01-16 23:16:00) EXPSECS(934) Host: phone IP: A.B.C.D Port: 50193 Auth-User: 1001 Auth-Realm: X.Y.Z.T MWI-Account: 1001@X.Y.Z.T
Call-ID: 3c27b7424837-bsfi877ujb2n User: 1000@X.Y.Z.T Contact: "freeswitch"<sip:1000@192.168.0.69:2048;line=skgk4hug> Agent: snom300/8.4.32 Status: Registered(UDP)(unknown) EXP(2012-01-17 00:01:24) EXPSECS(3658) Host: phone IP: A.B.C.D Port: 62061 Auth-User: 1000 Auth-Realm: X.Y.Z.T MWI-Account: 1000@X.Y.Z.T
Total items returned: 2 =================================================================================================
All necessary ports are opened/forwarded on the server.
I See on the 1000 configuration that this is the local ip address which is set as contact. Is there any other setups to do in the directory ? Or other parameters in the external profile ?
Thanks for your help !
Regards,
-- Alexis de BRUYN Mail : alexis.mailinglist@de-bruyn.fr
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi Ryan, Thank you for your answer, your server is behind NAT and your client too ? Regards, On 18.01.2012 05:06, Ryan How wrote:
Hi,
I set mine up for the external phones to log into the internal profile and it just worked (port 5060). But it might depend on the type of NAT or something, I'm by no means an expert on the subject.
Probably worth securing it better than the default config once you get it going if it works on the internal profile.
Ryan
On 18/01/2012 5:04 AM, Alexis de BRUYN [Mailinglists] wrote:
Hi Everybody,
I am trying to get a conversation between two natted clients and a natted freeswitch server. I am playing with a fresh install, the external profile and default directory (1000& 1001 users).
I can see that my clients are registered on the server logs (on the 5080 port). All others needed ports are opened too.
I have followed the instructions from the wiki to get a double nat configuration, but my client phone are not ringing (and I cannot hear anything).
All is working fine with defaults in a non nat configuration (with internal profile).
Is there anything special to set up in the directory / user configuration ?
Can anyone give me some hints with his natted configuration ? I am stuck.
Thanks for your help.
Regards,
-------- Original Message -------- Subject: [Freeswitch-users] USER_NOT_REGISTERED with external profile Date: Mon, 16 Jan 2012 23:37:20 +0100 From: Alexis de BRUYN [Mailinglists]<alexis.mailinglist@de-bruyn.fr> Reply-To: FreeSWITCH Users Help<freeswitch-users@lists.freeswitch.org> To: freeswitch-users@lists.freeswitch.org
Hi Everybody,
I am trying to use FreeSwitch in a (double) NAT Configuration from a fresh snapshot install (Debian Squeeze, server outside from my client LAN) with default directory for users.
When I call 1001 from 1000 (or 1000 from 1001) , I cannot hear the callee, the phone doesn't ring and automatically hangup, I see in the console :
2012-01-16 22:59:37.691663 [ERR] switch_ivr_originate.c:2447 Cannot create outgoing channel of type [error] cause: [USER_NOT_REGISTERED] 2012-01-16 22:59:37.691663 [ERR] switch_ivr_originate.c:2447 Cannot create outgoing channel of type [user] cause: [USER_NOT_REGISTERED]
However, 1000 and 1001 are registered (from the same LAN) :
sofia status profile external
================================================================================================= Name external Domain Name N/A Auto-NAT false DBName sofia_reg_external Pres Hosts Dialplan XML Context public Challenge Realm auto_to RTP-IP 192.168.1.6 SIP-IP 192.168.1.6 URL sip:mod_sofia@192.168.1.6:5080 BIND-URL sip:mod_sofia@192.168.1.6:5080 HOLD-MUSIC local_stream://moh OUTBOUND-PROXY N/A CODECS IN G7221@32000h,G7221@16000h,G722,PCMU,PCMA,GSM CODECS OUT PCMU,PCMA,GSM TEL-EVENT 101 DTMF-MODE rfc2833 CNG 13 SESSION-TO 0 MAX-DIALOG 0 NOMEDIA false LATE-NEG false PROXY-MEDIA false AGGRESSIVENAT false STUN-ENABLED true STUN-AUTO-DISABLE false CALLS-IN 3 FAILED-CALLS-IN 0 CALLS-OUT 0 FAILED-CALLS-OUT 0
Registrations: ================================================================================================= Call-ID: aU.1ZlEZkW7nlHpwp9ig1lt7A3weNnwm User: 1001@X.Y.Z.T Contact: "Freeswitch"<sip:1001@A.B.C.D:50193> Agent: Bria iOS 2.0.0 Status: Registered(UDP)(unknown) EXP(2012-01-16 23:16:00) EXPSECS(934) Host: phone IP: A.B.C.D Port: 50193 Auth-User: 1001 Auth-Realm: X.Y.Z.T MWI-Account: 1001@X.Y.Z.T
Call-ID: 3c27b7424837-bsfi877ujb2n User: 1000@X.Y.Z.T Contact: "freeswitch"<sip:1000@192.168.0.69:2048;line=skgk4hug> Agent: snom300/8.4.32 Status: Registered(UDP)(unknown) EXP(2012-01-17 00:01:24) EXPSECS(3658) Host: phone IP: A.B.C.D Port: 62061 Auth-User: 1000 Auth-Realm: X.Y.Z.T MWI-Account: 1000@X.Y.Z.T
Total items returned: 2 =================================================================================================
All necessary ports are opened/forwarded on the server.
I See on the 1000 configuration that this is the local ip address which is set as contact. Is there any other setups to do in the directory ? Or other parameters in the external profile ?
Thanks for your help !
Regards,
-- Alexis de BRUYN Mail : alexis.mailinglist@de-bruyn.fr
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- -- Alexis de BRUYN Mail : alexis.mailinglist@de-bruyn.fr
Yes. Both the server and client are behind a NAT. I haven't tried 2 clients behind the same NAT. On 19/01/2012, at 5:48 AM, "Alexis de BRUYN [Mailinglists]" <alexis.mailinglist@de-bruyn.fr> wrote:
Hi Ryan,
Thank you for your answer, your server is behind NAT and your client too ?
Regards,
On 18.01.2012 05:06, Ryan How wrote:
Hi,
I set mine up for the external phones to log into the internal profile and it just worked (port 5060). But it might depend on the type of NAT or something, I'm by no means an expert on the subject.
Probably worth securing it better than the default config once you get it going if it works on the internal profile.
Ryan
On 18/01/2012 5:04 AM, Alexis de BRUYN [Mailinglists] wrote:
Hi Everybody,
I am trying to get a conversation between two natted clients and a natted freeswitch server. I am playing with a fresh install, the external profile and default directory (1000& 1001 users).
I can see that my clients are registered on the server logs (on the 5080 port). All others needed ports are opened too.
I have followed the instructions from the wiki to get a double nat configuration, but my client phone are not ringing (and I cannot hear anything).
All is working fine with defaults in a non nat configuration (with internal profile).
Is there anything special to set up in the directory / user configuration ?
Can anyone give me some hints with his natted configuration ? I am stuck.
Thanks for your help.
Regards,
-------- Original Message -------- Subject: [Freeswitch-users] USER_NOT_REGISTERED with external profile Date: Mon, 16 Jan 2012 23:37:20 +0100 From: Alexis de BRUYN [Mailinglists]<alexis.mailinglist@de-bruyn.fr> Reply-To: FreeSWITCH Users Help<freeswitch-users@lists.freeswitch.org> To: freeswitch-users@lists.freeswitch.org
Hi Everybody,
I am trying to use FreeSwitch in a (double) NAT Configuration from a fresh snapshot install (Debian Squeeze, server outside from my client LAN) with default directory for users.
When I call 1001 from 1000 (or 1000 from 1001) , I cannot hear the callee, the phone doesn't ring and automatically hangup, I see in the console :
2012-01-16 22:59:37.691663 [ERR] switch_ivr_originate.c:2447 Cannot create outgoing channel of type [error] cause: [USER_NOT_REGISTERED] 2012-01-16 22:59:37.691663 [ERR] switch_ivr_originate.c:2447 Cannot create outgoing channel of type [user] cause: [USER_NOT_REGISTERED]
However, 1000 and 1001 are registered (from the same LAN) :
sofia status profile external
================================================================================================= Name external Domain Name N/A Auto-NAT false DBName sofia_reg_external Pres Hosts Dialplan XML Context public Challenge Realm auto_to RTP-IP 192.168.1.6 SIP-IP 192.168.1.6 URL sip:mod_sofia@192.168.1.6:5080 BIND-URL sip:mod_sofia@192.168.1.6:5080 HOLD-MUSIC local_stream://moh OUTBOUND-PROXY N/A CODECS IN G7221@32000h,G7221@16000h,G722,PCMU,PCMA,GSM CODECS OUT PCMU,PCMA,GSM TEL-EVENT 101 DTMF-MODE rfc2833 CNG 13 SESSION-TO 0 MAX-DIALOG 0 NOMEDIA false LATE-NEG false PROXY-MEDIA false AGGRESSIVENAT false STUN-ENABLED true STUN-AUTO-DISABLE false CALLS-IN 3 FAILED-CALLS-IN 0 CALLS-OUT 0 FAILED-CALLS-OUT 0
Registrations: ================================================================================================= Call-ID: aU.1ZlEZkW7nlHpwp9ig1lt7A3weNnwm User: 1001@X.Y.Z.T Contact: "Freeswitch"<sip:1001@A.B.C.D:50193> Agent: Bria iOS 2.0.0 Status: Registered(UDP)(unknown) EXP(2012-01-16 23:16:00) EXPSECS(934) Host: phone IP: A.B.C.D Port: 50193 Auth-User: 1001 Auth-Realm: X.Y.Z.T MWI-Account: 1001@X.Y.Z.T
Call-ID: 3c27b7424837-bsfi877ujb2n User: 1000@X.Y.Z.T Contact: "freeswitch"<sip:1000@192.168.0.69:2048;line=skgk4hug> Agent: snom300/8.4.32 Status: Registered(UDP)(unknown) EXP(2012-01-17 00:01:24) EXPSECS(3658) Host: phone IP: A.B.C.D Port: 62061 Auth-User: 1000 Auth-Realm: X.Y.Z.T MWI-Account: 1000@X.Y.Z.T
Total items returned: 2 =================================================================================================
All necessary ports are opened/forwarded on the server.
I See on the 1000 configuration that this is the local ip address which is set as contact. Is there any other setups to do in the directory ? Or other parameters in the external profile ?
Thanks for your help !
Regards,
-- Alexis de BRUYN Mail : alexis.mailinglist@de-bruyn.fr
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- -- Alexis de BRUYN Mail : alexis.mailinglist@de-bruyn.fr
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Try to dump with tcpdump or ngrep and analyse using wireshark. 2012/1/19 Ryan How <rhow@exemail.com.au>
Yes. Both the server and client are behind a NAT. I haven't tried 2 clients behind the same NAT.
On 19/01/2012, at 5:48 AM, "Alexis de BRUYN [Mailinglists]" < alexis.mailinglist@de-bruyn.fr> wrote:
Hi Ryan,
Thank you for your answer, your server is behind NAT and your client too ?
Regards,
On 18.01.2012 05:06, Ryan How wrote:
Hi,
I set mine up for the external phones to log into the internal profile and it just worked (port 5060). But it might depend on the type of NAT or something, I'm by no means an expert on the subject.
Probably worth securing it better than the default config once you get it going if it works on the internal profile.
Ryan
On 18/01/2012 5:04 AM, Alexis de BRUYN [Mailinglists] wrote:
Hi Everybody,
I am trying to get a conversation between two natted clients and a natted freeswitch server. I am playing with a fresh install, the external profile and default directory (1000& 1001 users).
I can see that my clients are registered on the server logs (on the 5080 port). All others needed ports are opened too.
I have followed the instructions from the wiki to get a double nat configuration, but my client phone are not ringing (and I cannot hear anything).
All is working fine with defaults in a non nat configuration (with internal profile).
Is there anything special to set up in the directory / user configuration ?
Can anyone give me some hints with his natted configuration ? I am stuck.
Thanks for your help.
Regards,
-------- Original Message -------- Subject: [Freeswitch-users] USER_NOT_REGISTERED with external profile Date: Mon, 16 Jan 2012 23:37:20 +0100 From: Alexis de BRUYN [Mailinglists]<alexis.mailinglist@de-bruyn.fr> Reply-To: FreeSWITCH Users Help<freeswitch-users@lists.freeswitch.org> To: freeswitch-users@lists.freeswitch.org
Hi Everybody,
I am trying to use FreeSwitch in a (double) NAT Configuration from a fresh snapshot install (Debian Squeeze, server outside from my client LAN) with default directory for users.
When I call 1001 from 1000 (or 1000 from 1001) , I cannot hear the callee, the phone doesn't ring and automatically hangup, I see in the console :
2012-01-16 22:59:37.691663 [ERR] switch_ivr_originate.c:2447 Cannot create outgoing channel of type [error] cause: [USER_NOT_REGISTERED] 2012-01-16 22:59:37.691663 [ERR] switch_ivr_originate.c:2447 Cannot create outgoing channel of type [user] cause: [USER_NOT_REGISTERED]
However, 1000 and 1001 are registered (from the same LAN) :
sofia status profile external
=================================================================================================
Name external Domain Name N/A Auto-NAT false DBName sofia_reg_external Pres Hosts Dialplan XML Context public Challenge Realm auto_to RTP-IP 192.168.1.6 SIP-IP 192.168.1.6 URL sip:mod_sofia@192.168.1.6:5080 BIND-URL sip:mod_sofia@192.168.1.6:5080 HOLD-MUSIC local_stream://moh OUTBOUND-PROXY N/A CODECS IN G7221@32000h,G7221@16000h,G722,PCMU,PCMA,GSM CODECS OUT PCMU,PCMA,GSM TEL-EVENT 101 DTMF-MODE rfc2833 CNG 13 SESSION-TO 0 MAX-DIALOG 0 NOMEDIA false LATE-NEG false PROXY-MEDIA false AGGRESSIVENAT false STUN-ENABLED true STUN-AUTO-DISABLE false CALLS-IN 3 FAILED-CALLS-IN 0 CALLS-OUT 0 FAILED-CALLS-OUT 0
Registrations:
=================================================================================================
Call-ID: aU.1ZlEZkW7nlHpwp9ig1lt7A3weNnwm User: 1001@X.Y.Z.T Contact: "Freeswitch"<sip:1001@A.B.C.D:50193> Agent: Bria iOS 2.0.0 Status: Registered(UDP)(unknown) EXP(2012-01-16 23:16:00) EXPSECS(934) Host: phone IP: A.B.C.D Port: 50193 Auth-User: 1001 Auth-Realm: X.Y.Z.T MWI-Account: 1001@X.Y.Z.T
Call-ID: 3c27b7424837-bsfi877ujb2n User: 1000@X.Y.Z.T Contact: "freeswitch"<sip:1000@192.168.0.69:2048;line=skgk4hug> Agent: snom300/8.4.32 Status: Registered(UDP)(unknown) EXP(2012-01-17 00:01:24) EXPSECS(3658) Host: phone IP: A.B.C.D Port: 62061 Auth-User: 1000 Auth-Realm: X.Y.Z.T MWI-Account: 1000@X.Y.Z.T
Total items returned: 2
=================================================================================================
All necessary ports are opened/forwarded on the server.
I See on the 1000 configuration that this is the local ip address which is set as contact. Is there any other setups to do in the directory ? Or other parameters in the external profile ?
Thanks for your help !
Regards,
-- Alexis de BRUYN Mail : alexis.mailinglist@de-bruyn.fr
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- -- Alexis de BRUYN Mail : alexis.mailinglist@de-bruyn.fr
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (3)
-
Alexis de BRUYN [Mailinglists]
-
Anton Kvashenkin
-
Ryan How