Logging commands
Guys, is there a way to log cli commands that are being executed? More specifically I use the txtapi command from the xml_rpc module and need to be able to see when FreeSWITCH received and executed each command with argument. Is it doable already or would it require a code change? I already have this in my logfile.conf.xml <map name="all" value="debug,info,notice,warning,err,crit,alert"/>
I suspect it requires a 1 line code change to the mod_xml_rpc.c to log before executing. It would be somewhere right around mod_xml_rpc.c line 1056 (which is the line that actually executes the command). On Sep 11, 2014, at 7:21 PM, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Guys,
is there a way to log cli commands that are being executed? More specifically I use the txtapi command from the xml_rpc module and need to be able to see when FreeSWITCH received and executed each command with argument. Is it doable already or would it require a code change?
I already have this in my logfile.conf.xml <map name="all" value="debug,info,notice,warning,err,crit,alert"/>
Thanks Michael! I added this as line 1057 in mod_xml_rpc.c switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_INFO, "Executed HTTP request command: %s. Args: %s.\n", command, api_str); Could someone review it and check it into the repo? On Fri, Sep 12, 2014 at 1:33 PM, Michael Jerris <mike@jerris.com> wrote:
I suspect it requires a 1 line code change to the mod_xml_rpc.c to log before executing. It would be somewhere right around mod_xml_rpc.c line 1056 (which is the line that actually executes the command).
On Sep 11, 2014, at 7:21 PM, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Guys,
is there a way to log cli commands that are being executed? More specifically I use the txtapi command from the xml_rpc module and need to be able to see when FreeSWITCH received and executed each command with argument. Is it doable already or would it require a code change?
I already have this in my logfile.conf.xml <map name="all" value="debug,info,notice,warning,err,crit,alert"/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
You can submit it as a pull request on stash.freeswitch.org I'd suggest though that a) you make it debug not info and b) make it configurable (at least so you can enable it, disabled by default - you could also allow the user to configure the logging level. In some use cases a busy server it could result in a lot of logging which may be undesirable. On 13 September 2014 00:12, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Thanks Michael!
I added this as line 1057 in mod_xml_rpc.c
switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_INFO, "Executed HTTP request command: %s. Args: %s.\n", command, api_str);
Could someone review it and check it into the repo?
On Fri, Sep 12, 2014 at 1:33 PM, Michael Jerris <mike@jerris.com> wrote:
I suspect it requires a 1 line code change to the mod_xml_rpc.c to log before executing. It would be somewhere right around mod_xml_rpc.c line 1056 (which is the line that actually executes the command).
On Sep 11, 2014, at 7:21 PM, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Guys,
is there a way to log cli commands that are being executed? More specifically I use the txtapi command from the xml_rpc module and need to be able to see when FreeSWITCH received and executed each command with argument. Is it doable already or would it require a code change?
I already have this in my logfile.conf.xml <map name="all" value="debug,info,notice,warning,err,crit,alert"/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Those are excellent ideas Steven, thanks! I am thinking of implementing the configurability by adding the strings or regex patterns to the config file. Only commands that contain those patterns will be logged. It's been a looooong time since I worked with C, so this may take me a bit of time. One question that'll need to be decided - should I allow regex patterns in the config file or just a list of strings that will be compared to the command + api_str using simple stristr. What do you think? On Fri, Sep 12, 2014 at 4:39 PM, Steven Ayre <steveayre@gmail.com> wrote:
You can submit it as a pull request on stash.freeswitch.org
I'd suggest though that a) you make it debug not info and b) make it configurable (at least so you can enable it, disabled by default - you could also allow the user to configure the logging level. In some use cases a busy server it could result in a lot of logging which may be undesirable.
On 13 September 2014 00:12, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Thanks Michael!
I added this as line 1057 in mod_xml_rpc.c
switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_INFO, "Executed HTTP request command: %s. Args: %s.\n", command, api_str);
Could someone review it and check it into the repo?
On Fri, Sep 12, 2014 at 1:33 PM, Michael Jerris <mike@jerris.com> wrote:
I suspect it requires a 1 line code change to the mod_xml_rpc.c to log before executing. It would be somewhere right around mod_xml_rpc.c line 1056 (which is the line that actually executes the command).
On Sep 11, 2014, at 7:21 PM, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Guys,
is there a way to log cli commands that are being executed? More specifically I use the txtapi command from the xml_rpc module and need to be able to see when FreeSWITCH received and executed each command with argument. Is it doable already or would it require a code change?
I already have this in my logfile.conf.xml <map name="all" value="debug,info,notice,warning,err,crit,alert"/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I've made the changes (using regex) but I believe I need a login to commit to a branch before make a pull request on stash.freeswitch.org. Can I get that or can I send my changes to someone to quickly review and commit them? It's just two files - mod_xml_rpc.c and xml_rpc.conf.xml in the vanilla conf where I added a commented out example and a comment explaning what it does. On Fri, Sep 12, 2014 at 5:27 PM, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Those are excellent ideas Steven, thanks!
I am thinking of implementing the configurability by adding the strings or regex patterns to the config file. Only commands that contain those patterns will be logged. It's been a looooong time since I worked with C, so this may take me a bit of time.
One question that'll need to be decided - should I allow regex patterns in the config file or just a list of strings that will be compared to the command + api_str using simple stristr. What do you think?
On Fri, Sep 12, 2014 at 4:39 PM, Steven Ayre <steveayre@gmail.com> wrote:
You can submit it as a pull request on stash.freeswitch.org
I'd suggest though that a) you make it debug not info and b) make it configurable (at least so you can enable it, disabled by default - you could also allow the user to configure the logging level. In some use cases a busy server it could result in a lot of logging which may be undesirable.
On 13 September 2014 00:12, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Thanks Michael!
I added this as line 1057 in mod_xml_rpc.c
switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_INFO, "Executed HTTP request command: %s. Args: %s.\n", command, api_str);
Could someone review it and check it into the repo?
On Fri, Sep 12, 2014 at 1:33 PM, Michael Jerris <mike@jerris.com> wrote:
I suspect it requires a 1 line code change to the mod_xml_rpc.c to log before executing. It would be somewhere right around mod_xml_rpc.c line 1056 (which is the line that actually executes the command).
On Sep 11, 2014, at 7:21 PM, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Guys,
is there a way to log cli commands that are being executed? More specifically I use the txtapi command from the xml_rpc module and need to be able to see when FreeSWITCH received and executed each command with argument. Is it doable already or would it require a code change?
I already have this in my logfile.conf.xml <map name="all" value="debug,info,notice,warning,err,crit,alert"/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
There is a nice guide (with pictures!) at https://confluence.freeswitch.org/display/FREESWITCH/Pull+Requests Just one thing, there's no need to clone your forked repo if you already have a copy of main freeswitch repo. Add it as a new remote (git remote add ...), push to it and then continue with creating the pull request etc. On 14 September 2014 16:15, Oleg Stolyar <olegstolyar@gmail.com> wrote:
I've made the changes (using regex) but I believe I need a login to commit to a branch before make a pull request on stash.freeswitch.org.
Can I get that or can I send my changes to someone to quickly review and commit them? It's just two files - mod_xml_rpc.c and xml_rpc.conf.xml in the vanilla conf where I added a commented out example and a comment explaning what it does.
On Fri, Sep 12, 2014 at 5:27 PM, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Those are excellent ideas Steven, thanks!
I am thinking of implementing the configurability by adding the strings or regex patterns to the config file. Only commands that contain those patterns will be logged. It's been a looooong time since I worked with C, so this may take me a bit of time.
One question that'll need to be decided - should I allow regex patterns in the config file or just a list of strings that will be compared to the command + api_str using simple stristr. What do you think?
On Fri, Sep 12, 2014 at 4:39 PM, Steven Ayre <steveayre@gmail.com> wrote:
You can submit it as a pull request on stash.freeswitch.org
I'd suggest though that a) you make it debug not info and b) make it configurable (at least so you can enable it, disabled by default - you could also allow the user to configure the logging level. In some use cases a busy server it could result in a lot of logging which may be undesirable.
On 13 September 2014 00:12, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Thanks Michael!
I added this as line 1057 in mod_xml_rpc.c
switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_INFO, "Executed HTTP request command: %s. Args: %s.\n", command, api_str);
Could someone review it and check it into the repo?
On Fri, Sep 12, 2014 at 1:33 PM, Michael Jerris <mike@jerris.com> wrote:
I suspect it requires a 1 line code change to the mod_xml_rpc.c to log before executing. It would be somewhere right around mod_xml_rpc.c line 1056 (which is the line that actually executes the command).
On Sep 11, 2014, at 7:21 PM, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Guys,
is there a way to log cli commands that are being executed? More specifically I use the txtapi command from the xml_rpc module and need to be able to see when FreeSWITCH received and executed each command with argument. Is it doable already or would it require a code change?
I already have this in my logfile.conf.xml <map name="all" value="debug,info,notice,warning,err,crit,alert"/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Dušan Dragić
Thanks Dušan! Jira account I already have. Will start the process. On Sun, Sep 14, 2014 at 7:45 AM, Dušan Dragić <dragic.dusan@gmail.com> wrote:
There is a nice guide (with pictures!) at https://confluence.freeswitch.org/display/FREESWITCH/Pull+Requests Just one thing, there's no need to clone your forked repo if you already have a copy of main freeswitch repo. Add it as a new remote (git remote add ...), push to it and then continue with creating the pull request etc.
On 14 September 2014 16:15, Oleg Stolyar <olegstolyar@gmail.com> wrote:
I've made the changes (using regex) but I believe I need a login to commit to a branch before make a pull request on stash.freeswitch.org.
Can I get that or can I send my changes to someone to quickly review and commit them? It's just two files - mod_xml_rpc.c and xml_rpc.conf.xml in the vanilla conf where I added a commented out example and a comment explaning what it does.
On Fri, Sep 12, 2014 at 5:27 PM, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Those are excellent ideas Steven, thanks!
I am thinking of implementing the configurability by adding the strings
or
regex patterns to the config file. Only commands that contain those patterns will be logged. It's been a looooong time since I worked with C, so this may take me a bit of time.
One question that'll need to be decided - should I allow regex patterns in the config file or just a list of strings that will be compared to the command + api_str using simple stristr. What do you think?
On Fri, Sep 12, 2014 at 4:39 PM, Steven Ayre <steveayre@gmail.com> wrote:
You can submit it as a pull request on stash.freeswitch.org
I'd suggest though that a) you make it debug not info and b) make it configurable (at least so you can enable it, disabled by default - you
could
also allow the user to configure the logging level. In some use cases a busy server it could result in a lot of logging which may be undesirable.
On 13 September 2014 00:12, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Thanks Michael!
I added this as line 1057 in mod_xml_rpc.c
switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_INFO, "Executed HTTP request command: %s. Args: %s.\n", command, api_str);
Could someone review it and check it into the repo?
On Fri, Sep 12, 2014 at 1:33 PM, Michael Jerris <mike@jerris.com>
wrote:
I suspect it requires a 1 line code change to the mod_xml_rpc.c to
log
before executing. It would be somewhere right around mod_xml_rpc.c line 1056 (which is the line that actually executes the command).
On Sep 11, 2014, at 7:21 PM, Oleg Stolyar <olegstolyar@gmail.com> wrote:
> Guys, > > is there a way to log cli commands that are being executed? More > specifically I use the txtapi command from the xml_rpc module and need to be > able to see when FreeSWITCH received and executed each command with > argument. Is it doable already or would it require a code change? > > I already have this in my logfile.conf.xml > <map name="all" value="debug,info,notice,warning,err,crit,alert"/> >
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Dušan Dragić
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Pull request created. Thanks Michael, Steven, Dušan! On Sun, Sep 14, 2014 at 8:46 AM, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Thanks Dušan!
Jira account I already have. Will start the process.
On Sun, Sep 14, 2014 at 7:45 AM, Dušan Dragić <dragic.dusan@gmail.com> wrote:
There is a nice guide (with pictures!) at https://confluence.freeswitch.org/display/FREESWITCH/Pull+Requests Just one thing, there's no need to clone your forked repo if you already have a copy of main freeswitch repo. Add it as a new remote (git remote add ...), push to it and then continue with creating the pull request etc.
On 14 September 2014 16:15, Oleg Stolyar <olegstolyar@gmail.com> wrote:
I've made the changes (using regex) but I believe I need a login to commit to a branch before make a pull request on stash.freeswitch.org.
Can I get that or can I send my changes to someone to quickly review and commit them? It's just two files - mod_xml_rpc.c and xml_rpc.conf.xml in the vanilla conf where I added a commented out example and a comment explaning what it does.
On Fri, Sep 12, 2014 at 5:27 PM, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Those are excellent ideas Steven, thanks!
I am thinking of implementing the configurability by adding the
strings or
regex patterns to the config file. Only commands that contain those patterns will be logged. It's been a looooong time since I worked with C, so this may take me a bit of time.
One question that'll need to be decided - should I allow regex patterns in the config file or just a list of strings that will be compared to the command + api_str using simple stristr. What do you think?
On Fri, Sep 12, 2014 at 4:39 PM, Steven Ayre <steveayre@gmail.com> wrote:
You can submit it as a pull request on stash.freeswitch.org
I'd suggest though that a) you make it debug not info and b) make it configurable (at least so you can enable it, disabled by default -
you could
also allow the user to configure the logging level. In some use cases a busy server it could result in a lot of logging which may be undesirable.
On 13 September 2014 00:12, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Thanks Michael!
I added this as line 1057 in mod_xml_rpc.c
switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_INFO, "Executed HTTP request command: %s. Args: %s.\n", command, api_str);
Could someone review it and check it into the repo?
On Fri, Sep 12, 2014 at 1:33 PM, Michael Jerris <mike@jerris.com>
wrote:
> > I suspect it requires a 1 line code change to the mod_xml_rpc.c to log > before executing. It would be somewhere right around mod_xml_rpc.c line > 1056 (which is the line that actually executes the command). > > > On Sep 11, 2014, at 7:21 PM, Oleg Stolyar <olegstolyar@gmail.com> > wrote: > > > Guys, > > > > is there a way to log cli commands that are being executed? More > > specifically I use the txtapi command from the xml_rpc module and need to be > > able to see when FreeSWITCH received and executed each command with > > argument. Is it doable already or would it require a code change? > > > > I already have this in my logfile.conf.xml > > <map name="all" value="debug,info,notice,warning,err,crit,alert"/> > > > > > >
> Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org > http://www.freeswitchsolutions.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://confluence.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-powered IP PBX: The CudaTel Communication Server > http://www.cudatel.com > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > > UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Dušan Dragić
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Guys, could someone take a look at this pull request? I understand that it's not the highest priority but it's very small. https://stash.freeswitch.org/projects/FS/repos/freeswitch/pull-requests/56/o... On Sun, Sep 14, 2014 at 9:18 AM, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Pull request created. Thanks Michael, Steven, Dušan!
On Sun, Sep 14, 2014 at 8:46 AM, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Thanks Dušan!
Jira account I already have. Will start the process.
On Sun, Sep 14, 2014 at 7:45 AM, Dušan Dragić <dragic.dusan@gmail.com> wrote:
There is a nice guide (with pictures!) at https://confluence.freeswitch.org/display/FREESWITCH/Pull+Requests Just one thing, there's no need to clone your forked repo if you already have a copy of main freeswitch repo. Add it as a new remote (git remote add ...), push to it and then continue with creating the pull request etc.
On 14 September 2014 16:15, Oleg Stolyar <olegstolyar@gmail.com> wrote:
I've made the changes (using regex) but I believe I need a login to commit to a branch before make a pull request on stash.freeswitch.org.
Can I get that or can I send my changes to someone to quickly review and commit them? It's just two files - mod_xml_rpc.c and xml_rpc.conf.xml in the vanilla conf where I added a commented out example and a comment explaning what it does.
On Fri, Sep 12, 2014 at 5:27 PM, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Those are excellent ideas Steven, thanks!
I am thinking of implementing the configurability by adding the
strings or
regex patterns to the config file. Only commands that contain those patterns will be logged. It's been a looooong time since I worked with C, so this may take me a bit of time.
One question that'll need to be decided - should I allow regex patterns in the config file or just a list of strings that will be compared to the command + api_str using simple stristr. What do you think?
On Fri, Sep 12, 2014 at 4:39 PM, Steven Ayre <steveayre@gmail.com> wrote:
You can submit it as a pull request on stash.freeswitch.org
I'd suggest though that a) you make it debug not info and b) make it configurable (at least so you can enable it, disabled by default -
you could
also allow the user to configure the logging level. In some use cases a busy server it could result in a lot of logging which may be undesirable.
On 13 September 2014 00:12, Oleg Stolyar <olegstolyar@gmail.com> wrote: > > Thanks Michael! > > I added this as line 1057 in mod_xml_rpc.c > > switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_INFO, "Executed HTTP > request command: %s. Args: %s.\n", command, api_str); > > Could someone review it and check it into the repo? > > > On Fri, Sep 12, 2014 at 1:33 PM, Michael Jerris <mike@jerris.com> wrote: >> >> I suspect it requires a 1 line code change to the mod_xml_rpc.c to log >> before executing. It would be somewhere right around mod_xml_rpc.c line >> 1056 (which is the line that actually executes the command). >> >> >> On Sep 11, 2014, at 7:21 PM, Oleg Stolyar <olegstolyar@gmail.com> >> wrote: >> >> > Guys, >> > >> > is there a way to log cli commands that are being executed? More >> > specifically I use the txtapi command from the xml_rpc module and need to be >> > able to see when FreeSWITCH received and executed each command with >> > argument. Is it doable already or would it require a code change? >> > >> > I already have this in my logfile.conf.xml >> > <map name="all" value="debug,info,notice,warning,err,crit,alert"/> >> > >> >> >> >>
>> Professional FreeSWITCH Consulting Services: >> consulting@freeswitch.org >> http://www.freeswitchsolutions.com >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org >> http://confluence.freeswitch.org >> http://www.cluecon.com >> >> FreeSWITCH-powered IP PBX: The CudaTel Communication Server >> http://www.cudatel.com >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> >> UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org > > > > >
> Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org > http://www.freeswitchsolutions.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://confluence.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-powered IP PBX: The CudaTel Communication Server > http://www.cudatel.com > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Dušan Dragić
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I got a couple of reviews and comments and replied to them. What's the process of approving and merging this to master? On Wed, Oct 1, 2014 at 5:54 AM, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Guys,
could someone take a look at this pull request? I understand that it's not the highest priority but it's very small.
https://stash.freeswitch.org/projects/FS/repos/freeswitch/pull-requests/56/o...
On Sun, Sep 14, 2014 at 9:18 AM, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Pull request created. Thanks Michael, Steven, Dušan!
On Sun, Sep 14, 2014 at 8:46 AM, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Thanks Dušan!
Jira account I already have. Will start the process.
On Sun, Sep 14, 2014 at 7:45 AM, Dušan Dragić <dragic.dusan@gmail.com> wrote:
There is a nice guide (with pictures!) at https://confluence.freeswitch.org/display/FREESWITCH/Pull+Requests Just one thing, there's no need to clone your forked repo if you already have a copy of main freeswitch repo. Add it as a new remote (git remote add ...), push to it and then continue with creating the pull request etc.
On 14 September 2014 16:15, Oleg Stolyar <olegstolyar@gmail.com> wrote:
I've made the changes (using regex) but I believe I need a login to commit to a branch before make a pull request on stash.freeswitch.org.
Can I get that or can I send my changes to someone to quickly review and commit them? It's just two files - mod_xml_rpc.c and xml_rpc.conf.xml in the vanilla conf where I added a commented out example and a comment explaning what it does.
On Fri, Sep 12, 2014 at 5:27 PM, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Those are excellent ideas Steven, thanks!
I am thinking of implementing the configurability by adding the
strings or
regex patterns to the config file. Only commands that contain those patterns will be logged. It's been a looooong time since I worked with C, so this may take me a bit of time.
One question that'll need to be decided - should I allow regex patterns in the config file or just a list of strings that will be compared to the command + api_str using simple stristr. What do you think?
On Fri, Sep 12, 2014 at 4:39 PM, Steven Ayre <steveayre@gmail.com> wrote: > > You can submit it as a pull request on stash.freeswitch.org > > I'd suggest though that a) you make it debug not info and b) make it > configurable (at least so you can enable it, disabled by default - you could > also allow the user to configure the logging level. In some use cases a busy > server it could result in a lot of logging which may be undesirable. > > > > > On 13 September 2014 00:12, Oleg Stolyar <olegstolyar@gmail.com> wrote: >> >> Thanks Michael! >> >> I added this as line 1057 in mod_xml_rpc.c >> >> switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_INFO, "Executed HTTP >> request command: %s. Args: %s.\n", command, api_str); >> >> Could someone review it and check it into the repo? >> >> >> On Fri, Sep 12, 2014 at 1:33 PM, Michael Jerris <mike@jerris.com> wrote: >>> >>> I suspect it requires a 1 line code change to the mod_xml_rpc.c to log >>> before executing. It would be somewhere right around mod_xml_rpc.c line >>> 1056 (which is the line that actually executes the command). >>> >>> >>> On Sep 11, 2014, at 7:21 PM, Oleg Stolyar <olegstolyar@gmail.com> >>> wrote: >>> >>> > Guys, >>> > >>> > is there a way to log cli commands that are being executed? More >>> > specifically I use the txtapi command from the xml_rpc module and need to be >>> > able to see when FreeSWITCH received and executed each command with >>> > argument. Is it doable already or would it require a code change? >>> > >>> > I already have this in my logfile.conf.xml >>> > <map name="all" value="debug,info,notice,warning,err,crit,alert"/> >>> > >>> >>> >>> >>>
>>> Professional FreeSWITCH Consulting Services: >>> consulting@freeswitch.org >>> http://www.freeswitchsolutions.com >>> >>> Official FreeSWITCH Sites >>> http://www.freeswitch.org >>> http://confluence.freeswitch.org >>> http://www.cluecon.com >>> >>> FreeSWITCH-powered IP PBX: The CudaTel Communication Server >>> http://www.cudatel.com >>> >>> FreeSWITCH-users mailing list >>> FreeSWITCH-users@lists.freeswitch.org >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>> >>> UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users >>> http://www.freeswitch.org >> >> >> >> >>
>> Professional FreeSWITCH Consulting Services: >> consulting@freeswitch.org >> http://www.freeswitchsolutions.com >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org >> http://confluence.freeswitch.org >> http://www.cluecon.com >> >> FreeSWITCH-powered IP PBX: The CudaTel Communication Server >> http://www.cudatel.com >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org > > > >
> Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org > http://www.freeswitchsolutions.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://confluence.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-powered IP PBX: The CudaTel Communication Server > http://www.cudatel.com > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Dušan Dragić
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Wait for Mike to reply to the latest - he'll get notified by Stash automatically that there's an update. He'll pull it into master if approved, or reply with more comments if not. On 28 October 2014 17:03, Oleg Stolyar <olegstolyar@gmail.com> wrote:
I got a couple of reviews and comments and replied to them. What's the process of approving and merging this to master?
On Wed, Oct 1, 2014 at 5:54 AM, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Guys,
could someone take a look at this pull request? I understand that it's not the highest priority but it's very small.
https://stash.freeswitch.org/projects/FS/repos/freeswitch/pull-requests/56/o...
On Sun, Sep 14, 2014 at 9:18 AM, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Pull request created. Thanks Michael, Steven, Dušan!
On Sun, Sep 14, 2014 at 8:46 AM, Oleg Stolyar <olegstolyar@gmail.com> wrote:
Thanks Dušan!
Jira account I already have. Will start the process.
On Sun, Sep 14, 2014 at 7:45 AM, Dušan Dragić <dragic.dusan@gmail.com> wrote:
There is a nice guide (with pictures!) at https://confluence.freeswitch.org/display/FREESWITCH/Pull+Requests Just one thing, there's no need to clone your forked repo if you already have a copy of main freeswitch repo. Add it as a new remote (git remote add ...), push to it and then continue with creating the pull request etc.
On 14 September 2014 16:15, Oleg Stolyar <olegstolyar@gmail.com> wrote:
I've made the changes (using regex) but I believe I need a login to commit to a branch before make a pull request on stash.freeswitch.org.
Can I get that or can I send my changes to someone to quickly review and commit them? It's just two files - mod_xml_rpc.c and xml_rpc.conf.xml in the vanilla conf where I added a commented out example and a comment explaning what it does.
On Fri, Sep 12, 2014 at 5:27 PM, Oleg Stolyar <olegstolyar@gmail.com> wrote: > > Those are excellent ideas Steven, thanks! > > I am thinking of implementing the configurability by adding the strings or > regex patterns to the config file. Only commands that contain those > patterns will be logged. It's been a looooong time since I worked with C, > so this may take me a bit of time. > > One question that'll need to be decided - should I allow regex patterns in > the config file or just a list of strings that will be compared to the > command + api_str using simple stristr. What do you think? > > On Fri, Sep 12, 2014 at 4:39 PM, Steven Ayre <steveayre@gmail.com> wrote: >> >> You can submit it as a pull request on stash.freeswitch.org >> >> I'd suggest though that a) you make it debug not info and b) make it >> configurable (at least so you can enable it, disabled by default - you could >> also allow the user to configure the logging level. In some use cases a busy >> server it could result in a lot of logging which may be undesirable. >> >> >> >> >> On 13 September 2014 00:12, Oleg Stolyar <olegstolyar@gmail.com> wrote: >>> >>> Thanks Michael! >>> >>> I added this as line 1057 in mod_xml_rpc.c >>> >>> switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_INFO, "Executed HTTP >>> request command: %s. Args: %s.\n", command, api_str); >>> >>> Could someone review it and check it into the repo? >>> >>> >>> On Fri, Sep 12, 2014 at 1:33 PM, Michael Jerris <mike@jerris.com> wrote: >>>> >>>> I suspect it requires a 1 line code change to the mod_xml_rpc.c to log >>>> before executing. It would be somewhere right around mod_xml_rpc.c line >>>> 1056 (which is the line that actually executes the command). >>>> >>>> >>>> On Sep 11, 2014, at 7:21 PM, Oleg Stolyar <olegstolyar@gmail.com
>>>> wrote: >>>> >>>> > Guys, >>>> > >>>> > is there a way to log cli commands that are being executed? More >>>> > specifically I use the txtapi command from the xml_rpc module and need to be >>>> > able to see when FreeSWITCH received and executed each command with >>>> > argument. Is it doable already or would it require a code change? >>>> > >>>> > I already have this in my logfile.conf.xml >>>> > <map name="all" value="debug,info,notice,warning,err,crit,alert"/> >>>> > >>>> >>>> >>>> >>>>
>>>> Professional FreeSWITCH Consulting Services: >>>> consulting@freeswitch.org >>>> http://www.freeswitchsolutions.com >>>> >>>> Official FreeSWITCH Sites >>>> http://www.freeswitch.org >>>> http://confluence.freeswitch.org >>>> http://www.cluecon.com >>>> >>>> FreeSWITCH-powered IP PBX: The CudaTel Communication Server >>>> http://www.cudatel.com >>>> >>>> FreeSWITCH-users mailing list >>>> FreeSWITCH-users@lists.freeswitch.org >>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>>> >>>> UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users >>>> http://www.freeswitch.org >>> >>> >>> >>> >>>
>>> Professional FreeSWITCH Consulting Services: >>> consulting@freeswitch.org >>> http://www.freeswitchsolutions.com >>> >>> Official FreeSWITCH Sites >>> http://www.freeswitch.org >>> http://confluence.freeswitch.org >>> http://www.cluecon.com >>> >>> FreeSWITCH-powered IP PBX: The CudaTel Communication Server >>> http://www.cudatel.com >>> >>> FreeSWITCH-users mailing list >>> FreeSWITCH-users@lists.freeswitch.org >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>> UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users >>> http://www.freeswitch.org >> >> >> >>
>> Professional FreeSWITCH Consulting Services: >> consulting@freeswitch.org >> http://www.freeswitchsolutions.com >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org >> http://confluence.freeswitch.org >> http://www.cluecon.com >> >> FreeSWITCH-powered IP PBX: The CudaTel Communication Server >> http://www.cudatel.com >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org > >
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Dušan Dragić
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (4)
-
Dušan Dragić
-
Michael Jerris
-
Oleg Stolyar
-
Steven Ayre