Its been a while since I’ve done any c programming (mostly have been doing java for a while) – ideally, I was hoping to just have an install that I could double click and run and test but it looks like the code is not in that stage yet.. can someone post some setup instructions for a developer setup in windows (should something like install visual studio, download code, hit compile and it will build everything that’s needed work?) – flame away if you think I should figure this out by myself – but I’m guessing there’s quite a few people that haven’t done c in a while.. _____ From: Anthony Minessale [mailto:anthmct@yahoo.com] Sent: Friday, July 14, 2006 8:23 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] freeswitch startup issue Hi, You can call make nodepends to deactivate all the autobuilding features but it's much harder to build then. as for the mission .so add $prefix/lib to your LD_LIBRARY_PATH If you build to the default location /usr/local/freeswitch add /usr/local/freeswitch/lib to ld.so.conf and run ldconfig or set it from the command line $ LD_LIBRARY_PATH=/usr/local/freeswitch/lib /usr/local/freeswitch/bin/freeswitch or set it as an environment variable from a prompt or in your shell rc file export LD_LIBRARY_PATH=/usr/local/freeswitch/lib Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ MSN:anthony_minessale@hotmail.com JABBER:anthony.minessale@gmail.com FreeSWITCH Developer Conference sip:888@66.250.68.194 pstn:712-432-7800 ----- Original Message ---- From: Abdul Qadir <ablqadir@yahoo.com> To: freeswitch-users@lists.freeswitch.org Sent: Thursday, July 13, 2006 12:08:52 AM Subject: [Freeswitch-users] freeswitch startup issue Hi ! Luckly freeswitch installed on my system after downloading other libraries. But when i run freeswitch I get this error ./freeswitch: error while loading shared libraries: /usr/local/freeswitch/lib/libfreeswitch.so.1: cannot restore segment prot after reloc: Permission denied Any idea how to solve this problem. Best Regards, Abdul Qadir _____ Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min. <http://us.rd.yahoo.com/mail_us/taglines/postman7/*http:/us.rd.yahoo.com/evt =39666/*http:/messenger.yahoo.com> _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org <http://www.freeswitch.org/>

Which parts and what version of PLAT-SDK should be installed? Thanks, --Dave _____ From: Anthony Minessale [mailto:anthmct@yahoo.com] Sent: Friday, July 14, 2006 1:10 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] freeswitch startup issue No problem, This is flame-retardant list so don't worry. I'll have someone follow up with more detailed instructions when they are free but in the meantime: 1) Get MSVC 2005 or the light one + the Platform SDK 2) check out via svn or download the source to your box 3) from the source dir open w32/vsnet/Freeswitch.sln 4) right click on the project and choose build That should build the entire thing Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ MSN:anthony_minessale@hotmail.com JABBER:anthony.minessale@gmail.com FreeSWITCH Developer Conference sip:888@66.250.68.194 pstn:712-432-7800 ----- Original Message ---- From: ivancoder <ivancoder@gmail.com> To: freeswitch-users@lists.freeswitch.org Sent: Friday, July 14, 2006 1:54:17 PM Subject: Re: [Freeswitch-users] freeswitch startup issue Its been a while since I’ve done any c programming (mostly have been doing java for a while) – ideally, I was hoping to just have an install that I could double click and run and test but it looks like the code is not in that stage yet.. can someone post some setup instructions for a developer setup in windows (should something like install visual studio, download code, hit compile and it will build everything that’s needed work?) – flame away if you think I should figure this out by myself – but I’m guessing there’s quite a few people that haven’t done c in a while.. _____ From: Anthony Minessale [mailto:anthmct@yahoo.com] Sent: Friday, July 14, 2006 8:23 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] freeswitch startup issue Hi, You can call make nodepends to deactivate all the autobuilding features but it's much harder to build then. as for the mission .so add $prefix/lib to your LD_LIBRARY_PATH If you build to the default location /usr/local/freeswitch add /usr/local/freeswitch/lib to ld.so.conf and run ldconfig or set it from the command line $ LD_LIBRARY_PATH=/usr/local/freeswitch/lib /usr/local/freeswitch/bin/freeswitch or set it as an environment variable from a prompt or in your shell rc file export LD_LIBRARY_PATH=/usr/local/freeswitch/lib Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ MSN:anthony_minessale@hotmail.com JABBER:anthony.minessale@gmail.com FreeSWITCH Developer Conference sip:888@66.250.68.194 pstn:712-432-7800 ----- Original Message ---- From: Abdul Qadir <ablqadir@yahoo.com> To: freeswitch-users@lists.freeswitch.org Sent: Thursday, July 13, 2006 12:08:52 AM Subject: [Freeswitch-users] freeswitch startup issue Hi ! Luckly freeswitch installed on my system after downloading other libraries. But when i run freeswitch I get this error ./freeswitch: error while loading shared libraries: /usr/local/freeswitch/lib/libfreeswitch.so.1: cannot restore segment prot after reloc: Permission denied Any idea how to solve this problem. Best Regards, Abdul Qadir _____ Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min. <http://us.rd.yahoo.com/mail_us/taglines/postman7/*http:/us.rd.yahoo.com/evt =39666/*http:/messenger.yahoo.com> _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org <http://www.freeswitch.org/> _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org <http://www.freeswitch.org/>

1. I didn’t really see those instructions – and was getting errors like could not find windows.h -> anyway those got resolved by looking at this post (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=7004 <http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=7004&SiteID=1> &SiteID=1) and copying over files as suggested. 2. That got me past basic installation type errors. But then I hit errors like could not find switch_version.h -> I saw a file called switch_version.h.in so I renamed it 3. Then I got errors of the type to prevent FreeSwitchCoreLib from being created: c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2875) : error C2275: 'switch_xml_t' : illegal use of this type as an expression c:\ccode\freeswitch\snapshot_freeswitch\src\include\switch_types.h(704) : see declaration of 'switch_xml_t' c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2875) : error C2146: syntax error : missing ';' before identifier 'xml' c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2875) : error C2065: 'xml' : undeclared identifier c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2875) : warning C4047: '=' : 'int' differs in levels of indirection from 'void *' c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2875) : error C2065: 'cfg' : undeclared identifier c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2875) : warning C4047: '=' : 'int' differs in levels of indirection from 'void *' c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2898) : warning C4047: 'function' : 'switch_xml_t *' differs in levels of indirection from 'int *__w64 ' c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2898) : warning C4024: 'switch_xml_open_cfg' : different types for formal and actual parameter 2 c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2898) : warning C4047: '=' : 'int' differs in levels of indirection from 'switch_xml_t' c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2901) : warning C4047: 'function' : 'switch_xml_t' differs in levels of indirection from 'int' c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2901) : warning C4024: 'switch_xml_child' : different types for formal and actual parameter 1 c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2911) : warning C4047: 'function' : 'switch_xml_t' differs in levels of indirection from 'int' c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2911) : warning C4024: 'switch_xml_free' : different types for formal and actual parameter 1 switch_loadable_module.c c:\ccode\freeswitch\snapshot_freeswitch\src\switch_loadable_module.c(671) : error C2220: warning treated as error - no 'object' file generated c:\ccode\freeswitch\snapshot_freeswitch\src\switch_loadable_module.c(671) : warning C4244: '=' : conversion from '__w64 int' to 'uint32_t', possible loss of data c:\ccode\freeswitch\snapshot_freeswitch\src\switch_loadable_module.c(686) : warning C4389: '==' : signed/unsigned mismatch Any insight will be much appreciated. Thanks, Ivan _____ From: Michael Jerris [mailto:mike@jerris.com] Sent: Saturday, July 15, 2006 2:40 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] freeswitch startup issue You only need to install platform sdk if using the MSVC 2005 express edition as it does not come with the platform sdk. The Profesional version does. I just installed the Windows 2003 version of the platform SDK (yes even on windows XP). When you download the express edition, there are a set of instructions that explain what exactly you need to install and what settings you need to change. Mike _____ From: David R. Kompel [mailto:drk@drkngs.net] Sent: Friday, July 14, 2006 5:49 PM To: 'Anthony Minessale'; freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] freeswitch startup issue Which parts and what version of PLAT-SDK should be installed? Thanks, --Dave _____ From: Anthony Minessale [mailto:anthmct@yahoo.com] Sent: Friday, July 14, 2006 1:10 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] freeswitch startup issue No problem, This is flame-retardant list so don't worry. I'll have someone follow up with more detailed instructions when they are free but in the meantime: 1) Get MSVC 2005 or the light one + the Platform SDK 2) check out via svn or download the source to your box 3) from the source dir open w32/vsnet/Freeswitch.sln 4) right click on the project and choose build That should build the entire thing Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ MSN:anthony_minessale@hotmail.com JABBER:anthony.minessale@gmail.com FreeSWITCH Developer Conference sip:888@66.250.68.194 pstn:712-432-7800 ----- Original Message ---- From: ivancoder <ivancoder@gmail.com> To: freeswitch-users@lists.freeswitch.org Sent: Friday, July 14, 2006 1:54:17 PM Subject: Re: [Freeswitch-users] freeswitch startup issue Its been a while since I’ve done any c programming (mostly have been doing java for a while) – ideally, I was hoping to just have an install that I could double click and run and test but it looks like the code is not in that stage yet.. can someone post some setup instructions for a developer setup in windows (should something like install visual studio, download code, hit compile and it will build everything that’s needed work?) – flame away if you think I should figure this out by myself – but I’m guessing there’s quite a few people that haven’t done c in a while.. _____ From: Anthony Minessale [mailto:anthmct@yahoo.com] Sent: Friday, July 14, 2006 8:23 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] freeswitch startup issue Hi, You can call make nodepends to deactivate all the autobuilding features but it's much harder to build then. as for the mission .so add $prefix/lib to your LD_LIBRARY_PATH If you build to the default location /usr/local/freeswitch add /usr/local/freeswitch/lib to ld.so.conf and run ldconfig or set it from the command line $ LD_LIBRARY_PATH=/usr/local/freeswitch/lib /usr/local/freeswitch/bin/freeswitch or set it as an environment variable from a prompt or in your shell rc file export LD_LIBRARY_PATH=/usr/local/freeswitch/lib Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ MSN:anthony_minessale@hotmail.com JABBER:anthony.minessale@gmail.com FreeSWITCH Developer Conference sip:888@66.250.68.194 pstn:712-432-7800 ----- Original Message ---- From: Abdul Qadir <ablqadir@yahoo.com> To: freeswitch-users@lists.freeswitch.org Sent: Thursday, July 13, 2006 12:08:52 AM Subject: [Freeswitch-users] freeswitch startup issue Hi ! Luckly freeswitch installed on my system after downloading other libraries. But when i run freeswitch I get this error ./freeswitch: error while loading shared libraries: /usr/local/freeswitch/lib/libfreeswitch.so.1: cannot restore segment prot after reloc: Permission denied Any idea how to solve this problem. Best Regards, Abdul Qadir _____ Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min. <http://us.rd.yahoo.com/mail_us/taglines/postman7/*http:/us.rd.yahoo.com/evt =39666/*http:/messenger.yahoo.com> _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org <http://www.freeswitch.org/> _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org <http://www.freeswitch.org/>

So I followed the instructions and it almost builds completely (========== Build: 33 succeeded, 1 failed, 0 up-to-date, 4 skipped ==========) 1. the only remaining error is: Compiling... mod_spidermonkey.c Compiling manifest to resources... Linking... LINK : fatal error LNK1104: cannot open file 'libetpan.lib' Build log was saved at "file://c:\cCode\fswitch\src\mod\languages\mod_spidermonkey\Debug\BuildLog.h tm" mod_spidermonkey - 1 error(s), 1 warning(s) The full output is attached as well. 2. Also, is there a recommended set of tests that should be run to validate the build ? Thanks, Ivan _____ From: Michael Jerris [mailto:mike@jerris.com] Sent: Saturday, July 15, 2006 5:00 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] freeswitch startup issue It would appear you are using the express edition of the compiler.. please make sure you have completely installed the platform sdk from the instructions on the express eddition download site: http://msdn.microsoft.com/vstudio/express/visualc/usingpsdk/ , and followed all the other steps necessary for express eddition to use it, the instructions are a bit confusing, but when you follow them closely, they should work every time After you get through that, do a fresh checkout of freeswitch (not quite sure what happened to yours). Make sure you have an internet connection on your first build, it downloads some required files and creates switch_version.h after doing some version lookups that require access to the subversion repository. open up w32/vsnet/freeswitch.sln Select the main solution node at the top of the solution explorer Right Click -> select build. If you continue to have issues after that, can you paste the ENTIRE initial build log in so I can take a look and/or catch me on IRC and let me into the box to take a look. Also, I just commited the updates to the installer this morning that includes all the more recent modules, I hope to do a daily snapshot msi for download soon. Mike _____ From: ivancoder [mailto:ivancoder@gmail.com] Sent: Saturday, July 15, 2006 4:39 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] freeswitch startup issue 1. I didn't really see those instructions - and was getting errors like could not find windows.h -> anyway those got resolved by looking at this post (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=7004 <http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=7004&SiteID=1> &SiteID=1) and copying over files as suggested. 2. That got me past basic installation type errors. But then I hit errors like could not find switch_version.h -> I saw a file called switch_version.h.in so I renamed it 3. Then I got errors of the type to prevent FreeSwitchCoreLib from being created: c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2875) : error C2275: 'switch_xml_t' : illegal use of this type as an expression c:\ccode\freeswitch\snapshot_freeswitch\src\include\switch_types.h(704) : see declaration of 'switch_xml_t' c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2875) : error C2146: syntax error : missing ';' before identifier 'xml' c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2875) : error C2065: 'xml' : undeclared identifier c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2875) : warning C4047: '=' : 'int' differs in levels of indirection from 'void *' c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2875) : error C2065: 'cfg' : undeclared identifier c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2875) : warning C4047: '=' : 'int' differs in levels of indirection from 'void *' c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2898) : warning C4047: 'function' : 'switch_xml_t *' differs in levels of indirection from 'int *__w64 ' c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2898) : warning C4024: 'switch_xml_open_cfg' : different types for formal and actual parameter 2 c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2898) : warning C4047: '=' : 'int' differs in levels of indirection from 'switch_xml_t' c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2901) : warning C4047: 'function' : 'switch_xml_t' differs in levels of indirection from 'int' c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2901) : warning C4024: 'switch_xml_child' : different types for formal and actual parameter 1 c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2911) : warning C4047: 'function' : 'switch_xml_t' differs in levels of indirection from 'int' c:\ccode\freeswitch\snapshot_freeswitch\src\switch_core.c(2911) : warning C4024: 'switch_xml_free' : different types for formal and actual parameter 1 switch_loadable_module.c c:\ccode\freeswitch\snapshot_freeswitch\src\switch_loadable_module.c(671) : error C2220: warning treated as error - no 'object' file generated c:\ccode\freeswitch\snapshot_freeswitch\src\switch_loadable_module.c(671) : warning C4244: '=' : conversion from '__w64 int' to 'uint32_t', possible loss of data c:\ccode\freeswitch\snapshot_freeswitch\src\switch_loadable_module.c(686) : warning C4389: '==' : signed/unsigned mismatch Any insight will be much appreciated. Thanks, Ivan

You just select build for the entrie solution... if there are other modules you want to build, such as perl or cepstral that require external software to be installed, you need to select and build them individually. Mike ________________________________ From: marshall anako [mailto:mdmanako@yahoo.com] Sent: Friday, July 14, 2006 8:22 PM To: Anthony Minessale; freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] freeswitch startup issue build what? I want to know. Marshall Anthony Minessale <anthmct@yahoo.com> wrote: No problem, This is flame-retardant list so don't worry. I'll have someone follow up with more detailed instructions when they are free but in the meantime: 1) Get MSVC 2005 or the light one + the Platform SDK 2) check out via svn or download the source to your box 3) from the source dir open w32/vsnet/Freeswitch.sln 4) right click on the project and choose build That should build the entire thing Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ MSN:anthony_minessale@hotmail.com JABBER:anthony.minessale@gmail.com FreeSWITCH Developer Conference sip:888@66.250.68.194 pstn:712-432-7800 ----- Original Message ---- From: ivancoder <ivancoder@gmail.com> To: freeswitch-users@lists.freeswitch.org Sent: Friday, July 14, 2006 1:54:17 PM Subject: Re: [Freeswitch-users] freeswitch startup issue Its been a while since I’ve done any c programming (mostly have been doing java for a while) – ideally, I was hoping to just have an install that I could double click and run and test but it looks like the code is not in that stage yet.. can someone post some setup instructions for a developer setup in windows (should something like install visual studio, download code, hit compile and it will build everything that’s needed work?) – flame away if you think I should figure this out by myself – but I’m guessing there’s quite a few people that haven’t done c in a while.. ________________________________ From: Anthony Minessale [mailto:anthmct@yahoo.com] Sent: Friday, July 14, 2006 8:23 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] freeswitch startup issue Hi, You can call make nodepends to deactivate all the autobuilding features but it's much harder to build then. as for the mission .so add $prefix/lib to your LD_LIBRARY_PATH If you build to the default location /usr/local/freeswitch add /usr/local/freeswitch/lib to ld.so.conf and run ldconfig or set it from the command line $ LD_LIBRARY_PATH=/usr/local/freeswitch/lib /usr/local/freeswitch/bin/freeswitch or set it as an environment variable from a prompt or in your shell rc file export LD_LIBRARY_PATH=/usr/local/freeswitch/lib Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ MSN:anthony_minessale@hotmail.com JABBER:anthony.minessale@gmail.com FreeSWITCH Developer Conference sip:888@66.250.68.194 pstn:712-432-7800 ----- Original Message ---- From: Abdul Qadir <ablqadir@yahoo.com> To: freeswitch-users@lists.freeswitch.org Sent: Thursday, July 13, 2006 12:08:52 AM Subject: [Freeswitch-users] freeswitch startup issue Hi ! Luckly freeswitch installed on my system after downloading other libraries. But when i run freeswitch I get this error ./freeswitch: error while loading shared libraries: /usr/local/freeswitch/lib/libfreeswitch.so.1: cannot restore segment prot after reloc: Permission denied Any idea how to solve this problem. Best Regards, Abdul Qadir ________________________________ Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min. <http://us.rd.yahoo.com/mail_us/taglines/postman7/*http:/us.rd.yahoo.com/evt=39666/*http:/messenger.yahoo.com> _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org <http://www.freeswitch.org/> _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org <http://www.freeswitch.org/> _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org Marshall David MbekAnako Umo Etukudo Ofon Nte Akpan Edok Eti Inan

Hi, Thanks for your reply. I did followed all the steps and still same error. I think the problem is not with loading the libraries there is some other error. Plz see the out put again and help me.. My OS is Fedora Core 5. why I am getting this error "cannot restore segment prot after reloc: Permission denied". These are the commands i issued [root@localhost bin]# LD_LIBRARY_PATH=/usr/local/freeswitch/lib [root@localhost bin]# ./freeswitch ./freeswitch: error while loading shared libraries: /usr/local/freeswitch/lib/libfreeswitch.so.1: cannot restore segment prot after reloc: Permission denied [root@localhost bin]# echo $LD_LIBRARY_PATH /usr/local/freeswitch/lib I also tried the ldconfig procedure and same results. Anthony Minessale <anthmct@yahoo.com> wrote: Hi, You can call make nodepends to deactivate all the autobuilding features but it's much harder to build then. as for the mission .so add $prefix/lib to your LD_LIBRARY_PATH If you build to the default location /usr/local/freeswitch add /usr/local/freeswitch/lib to ld.so.conf and run ldconfig or set it from the command line $ LD_LIBRARY_PATH=/usr/local/freeswitch/lib /usr/local/freeswitch/bin/freeswitch or set it as an environment variable from a prompt or in your shell rc file export LD_LIBRARY_PATH=/usr/local/freeswitch/lib Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ MSN:anthony_minessale@hotmail.com JABBER:anthony.minessale@gmail.com FreeSWITCH Developer Conference sip:888@66.250.68.194 pstn:712-432-7800 ----- Original Message ---- From: Abdul Qadir <ablqadir@yahoo.com> To: freeswitch-users@lists.freeswitch.org Sent: Thursday, July 13, 2006 12:08:52 AM Subject: [Freeswitch-users] freeswitch startup issue Hi ! Luckly freeswitch installed on my system after downloading other libraries. But when i run freeswitch I get this error ./freeswitch: error while loading shared libraries: /usr/local/freeswitch/lib/libfreeswitch.so.1: cannot restore segment prot after reloc: Permission denied Any idea how to solve this problem. Best Regards, Abdul Qadir --------------------------------- Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min. _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org --------------------------------- Want to be your own boss? Learn how on Yahoo! Small Business.