BEHAVIOR CHANGE (YES PAY ATTENTION TO THIS IF YOU USE FAXING)
FreeSWITCHers, In 1.6.14 we did a slight behavior change related to T.38 re-invite acceptance. Before 1.6.14 we would by default accept the re-invite even if t38 wasn't enabled and switch to UDPTL mode. This was an incorrect behavior to do by default. But one caveat in 1.6.14, We by default 488 the fax but switch the media mode to UDPTL which is also a bad behavior fixed in (FS-9943) slated for 1.6.15. If you wish to retain the previous behavior you can set fax_enable_t38=true in your vars.xml, You can also not set that and just set refuse_t38=true if you wish to never do t.38. These default behaviors are fixed in our next release 1.6.15. Thanks, -- *Brian West* brian@freeswitch.org *Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com https://www.gofundme.com/freeswitch_ubuntu Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch> *T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *Skype:*briankwest
To clarify this work around will work on 1.6.14: If you wish to retain the previous behavior you can set fax_enable_t38=true in your vars.xml, You can also not set that and just set refuse_t38=true if you wish to never do t.38. /b On Mon, Jan 23, 2017 at 9:26 AM, Brian West <brian@freeswitch.org> wrote:
FreeSWITCHers,
In 1.6.14 we did a slight behavior change related to T.38 re-invite acceptance. Before 1.6.14 we would by default accept the re-invite even if t38 wasn't enabled and switch to UDPTL mode. This was an incorrect behavior to do by default.
But one caveat in 1.6.14, We by default 488 the fax but switch the media mode to UDPTL which is also a bad behavior fixed in (FS-9943) slated for 1.6.15.
If you wish to retain the previous behavior you can set fax_enable_t38=true in your vars.xml, You can also not set that and just set refuse_t38=true if you wish to never do t.38.
These default behaviors are fixed in our next release 1.6.15.
Thanks,
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com https://www.gofundme.com/freeswitch_ubuntu
Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch>
*T:*+19184209001 <(918)%20420-9001> | *F:*+19184209002 <(918)%20420-9002> | *M:*+1918424WEST (9378) *Skype:*briankwest
-- *Brian West* brian@freeswitch.org *Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com https://www.gofundme.com/freeswitch_ubuntu Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch> *T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *Skype:*briankwest
Hi Brian, Thanks for informing us. I just switched back to 1.6.13 an hour ago due to users complaints (and did not have the time yet to dig more). However, I have the following settings for all users: <action application="set" data="fax_enable_t38_request=true"/> <action application="set" data="fax_enable_t38=true"/> which, according to your message above, should work ok. Anyway, I'll wait to 1.6.15... Thanks, __Yehavi: 2017-01-23 19:03 GMT+02:00 Brian West <brian@freeswitch.org>:
To clarify this work around will work on 1.6.14:
If you wish to retain the previous behavior you can set fax_enable_t38=true in your vars.xml, You can also not set that and just set refuse_t38=true if you wish to never do t.38.
/b
On Mon, Jan 23, 2017 at 9:26 AM, Brian West <brian@freeswitch.org> wrote:
FreeSWITCHers,
In 1.6.14 we did a slight behavior change related to T.38 re-invite acceptance. Before 1.6.14 we would by default accept the re-invite even if t38 wasn't enabled and switch to UDPTL mode. This was an incorrect behavior to do by default.
But one caveat in 1.6.14, We by default 488 the fax but switch the media mode to UDPTL which is also a bad behavior fixed in (FS-9943) slated for 1.6.15.
If you wish to retain the previous behavior you can set fax_enable_t38=true in your vars.xml, You can also not set that and just set refuse_t38=true if you wish to never do t.38.
These default behaviors are fixed in our next release 1.6.15.
Thanks,
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com https://www.gofundme.com/freeswitch_ubuntu
Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch>
*T:*+19184209001 <(918)%20420-9001> | *F:*+19184209002 <(918)%20420-9002> | *M:*+1918424WEST (9378) *Skype:*briankwest
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com https://www.gofundme.com/freeswitch_ubuntu
Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch>
*T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *Skype:*briankwest
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
You do NOT want 1.6.13 PERIOD if you're doing faxes or anything t.38 related. You're in for some pain. Use 1.6.14 or v1.6 branch which also has the final patches for 1.6.15. /b On Mon, Jan 23, 2017 at 12:55 PM, Yehavi Bourvine <yehavi.bourvine@gmail.com
wrote:
Hi Brian,
Thanks for informing us. I just switched back to 1.6.13 an hour ago due to users complaints (and did not have the time yet to dig more). However, I have the following settings for all users:
<action application="set" data="fax_enable_t38_request=true"/> <action application="set" data="fax_enable_t38=true"/>
which, according to your message above, should work ok. Anyway, I'll wait to 1.6.15...
Thanks, __Yehavi:
2017-01-23 19:03 GMT+02:00 Brian West <brian@freeswitch.org>:
To clarify this work around will work on 1.6.14:
If you wish to retain the previous behavior you can set fax_enable_t38=true in your vars.xml, You can also not set that and just set refuse_t38=true if you wish to never do t.38.
/b
On Mon, Jan 23, 2017 at 9:26 AM, Brian West <brian@freeswitch.org> wrote:
FreeSWITCHers,
In 1.6.14 we did a slight behavior change related to T.38 re-invite acceptance. Before 1.6.14 we would by default accept the re-invite even if t38 wasn't enabled and switch to UDPTL mode. This was an incorrect behavior to do by default.
But one caveat in 1.6.14, We by default 488 the fax but switch the media mode to UDPTL which is also a bad behavior fixed in (FS-9943) slated for 1.6.15.
If you wish to retain the previous behavior you can set fax_enable_t38=true in your vars.xml, You can also not set that and just set refuse_t38=true if you wish to never do t.38.
These default behaviors are fixed in our next release 1.6.15.
Thanks,
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com https://www.gofundme.com/freeswitch_ubuntu
Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch>
*T:*+19184209001 <(918)%20420-9001> | *F:*+19184209002 <(918)%20420-9002> | *M:*+1918424WEST (9378) *Skype:*briankwest
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com https://www.gofundme.com/freeswitch_ubuntu
Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch>
*T:*+19184209001 <(918)%20420-9001> | *F:*+19184209002 <(918)%20420-9002> | *M:*+1918424WEST (9378) *Skype:*briankwest
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- *Brian West* brian@freeswitch.org *Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com https://www.gofundme.com/freeswitch_ubuntu Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch> *T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *Skype:*briankwest
Brian, I noticed a behavior change with t38 between 1.6.6 and 1.6.15. With 1.6.15, if I receive a INVITE including PCMA/PCMU/t38, it got rejected with T37 REFUSE. If I enable T38 in vars.xml, it’s still rejected with T38 NOT POSSIBLE ON REQUEST. Is it related to the change you mentioned ? Thank you David Ponzone Direction Technique email: david.ponzone@ipeva.fr <mailto:david.ponzone@ipeva.fr> tel: 01 74 03 18 97 gsm: 06 66 98 76 34 Service Client IPeva tel: 0811 46 26 26 www.ipeva.fr <blocked::http://www.ipeva.fr/> - www.ipeva-studio.com <blocked::http://www.ipeva-studio.com/> Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.
Le 23 janv. 2017 à 20:59, Brian West <brian@freeswitch.org> a écrit :
You do NOT want 1.6.13 PERIOD if you're doing faxes or anything t.38 related. You're in for some pain.
Use 1.6.14 or v1.6 branch which also has the final patches for 1.6.15.
/b
On Mon, Jan 23, 2017 at 12:55 PM, Yehavi Bourvine <yehavi.bourvine@gmail.com <mailto:yehavi.bourvine@gmail.com>> wrote: Hi Brian,
Thanks for informing us. I just switched back to 1.6.13 an hour ago due to users complaints (and did not have the time yet to dig more). However, I have the following settings for all users:
<action application="set" data="fax_enable_t38_request=true"/> <action application="set" data="fax_enable_t38=true"/>
which, according to your message above, should work ok. Anyway, I'll wait to 1.6.15...
Thanks, __Yehavi:
2017-01-23 19:03 GMT+02:00 Brian West <brian@freeswitch.org <mailto:brian@freeswitch.org>>: To clarify this work around will work on 1.6.14:
If you wish to retain the previous behavior you can set fax_enable_t38=true in your vars.xml, You can also not set that and just set refuse_t38=true if you wish to never do t.38.
/b
On Mon, Jan 23, 2017 at 9:26 AM, Brian West <brian@freeswitch.org <mailto:brian@freeswitch.org>> wrote: FreeSWITCHers,
In 1.6.14 we did a slight behavior change related to T.38 re-invite acceptance. Before 1.6.14 we would by default accept the re-invite even if t38 wasn't enabled and switch to UDPTL mode. This was an incorrect behavior to do by default.
But one caveat in 1.6.14, We by default 488 the fax but switch the media mode to UDPTL which is also a bad behavior fixed in (FS-9943) slated for 1.6.15.
If you wish to retain the previous behavior you can set fax_enable_t38=true in your vars.xml, You can also not set that and just set refuse_t38=true if you wish to never do t.38.
These default behaviors are fixed in our next release 1.6.15.
Thanks,
-- Brian West brian@freeswitch.org <mailto:brian@freeswitch.org>
Twitter: @FreeSWITCH , @briankwest http://www.freeswitchbook.com <http://www.freeswitchbook.com/> http://www.freeswitchcookbook.com <http://www.freeswitchcookbook.com/> https://www.gofundme.com/freeswitch_ubuntu <https://www.gofundme.com/freeswitch_ubuntu> Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch> T:+19184209001 <tel:(918)%20420-9001> | F:+19184209002 <tel:(918)%20420-9002> | M:+1918424WEST (9378) Skype:briankwest
-- Brian West brian@freeswitch.org <mailto:brian@freeswitch.org>
Twitter: @FreeSWITCH , @briankwest http://www.freeswitchbook.com <http://www.freeswitchbook.com/> http://www.freeswitchcookbook.com <http://www.freeswitchcookbook.com/> https://www.gofundme.com/freeswitch_ubuntu <https://www.gofundme.com/freeswitch_ubuntu> Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch> T:+19184209001 <tel:(918)%20420-9001> | F:+19184209002 <tel:(918)%20420-9002> | M:+1918424WEST (9378) Skype:briankwest
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
-- Brian West brian@freeswitch.org <mailto:brian@freeswitch.org>
Twitter: @FreeSWITCH , @briankwest http://www.freeswitchbook.com <http://www.freeswitchbook.com/> http://www.freeswitchcookbook.com <http://www.freeswitchcookbook.com/> https://www.gofundme.com/freeswitch_ubuntu <https://www.gofundme.com/freeswitch_ubuntu> Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch> T:+19184209001 | F:+19184209002 | M:+1918424WEST (9378) Skype:briankwest
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Recently updated to 1.6.15 and I've got similiar problem. Asterisk now rejects calls with T.38 in initial INVITE with "488 Not Acceptable Here" message. Fortunately, I can "delete" this wrong T.38 in SDP on a softswitch before FS. 27.03.2017 21:49, David Ponzone пишет:
Brian,
I noticed a behavior change with t38 between 1.6.6 and 1.6.15. With 1.6.15, if I receive a INVITE including PCMA/PCMU/t38, it got rejected with T37 REFUSE. If I enable T38 in vars.xml, it’s still rejected with T38 NOT POSSIBLE ON REQUEST.
Is it related to the change you mentioned ?
Thank you
David PonzoneDirection Technique email: david.ponzone@ipeva.fr <mailto:david.ponzone@ipeva.fr> tel: 01 74 03 18 97 gsm: 06 66 98 76 34
Service Client IPeva tel: 0811 46 26 26 www.ipeva.fr <blocked::http://www.ipeva.fr/> - www.ipeva-studio.com <blocked::http://www.ipeva-studio.com/>
/Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. /*/IPeva/*/ décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur./ / /
Le 23 janv. 2017 à 20:59, Brian West <brian@freeswitch.org <mailto:brian@freeswitch.org>> a écrit :
You do NOT want 1.6.13 PERIOD if you're doing faxes or anything t.38 related. You're in for some pain.
Use 1.6.14 or v1.6 branch which also has the final patches for 1.6.15.
/b
On Mon, Jan 23, 2017 at 12:55 PM, Yehavi Bourvine <yehavi.bourvine@gmail.com <mailto:yehavi.bourvine@gmail.com>> wrote:
Hi Brian,
Thanks for informing us. I just switched back to 1.6.13 an hour ago due to users complaints (and did not have the time yet to dig more). However, I have the following settings for all users:
<action application="set" data="fax_enable_t38_request=true"/> <action application="set" data="fax_enable_t38=true"/>
which, according to your message above, should work ok. Anyway, I'll wait to 1.6.15...
Thanks, __Yehavi:
2017-01-23 19:03 GMT+02:00 Brian West <brian@freeswitch.org <mailto:brian@freeswitch.org>>:
To clarify this work around will work on 1.6.14:
If you wish to retain the previous behavior you can set fax_enable_t38=true in your vars.xml, You can also not set that and just set refuse_t38=true if you wish to never do t.38.
/b
On Mon, Jan 23, 2017 at 9:26 AM, Brian West <brian@freeswitch.org <mailto:brian@freeswitch.org>> wrote:
FreeSWITCHers,
In 1.6.14 we did a slight behavior change related to T.38 re-invite acceptance. Before 1.6.14 we would by default accept the re-invite even if t38 wasn't enabled and switch to UDPTL mode. This was an incorrect behavior to do by default.
But one caveat in 1.6.14, We by default 488 the fax but switch the media mode to UDPTL which is also a bad behavior fixed in (FS-9943) slated for 1.6.15.
If you wish to retain the previous behavior you can set fax_enable_t38=true in your vars.xml, You can also not set that and just set refuse_t38=true if you wish to never do t.38.
These default behaviors are fixed in our next release 1.6.15.
Thanks,
--
*/Brian West/* brian@freeswitch.org <mailto:brian@freeswitch.org>
*/Twitter: @FreeSWITCH , @briankwest/* http://www.freeswitchbook.com <http://www.freeswitchbook.com/> http://www.freeswitchcookbook.com <http://www.freeswitchcookbook.com/> https://www.gofundme.com/freeswitch_ubuntu <https://www.gofundme.com/freeswitch_ubuntu>
Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch>
*T:*+19184209001 <tel:%28918%29%20420-9001> | *F:*+19184209002 <tel:%28918%29%20420-9002> | *M:*+1918424WEST (9378) *Skype:*briankwest
--
*/Brian West/* brian@freeswitch.org <mailto:brian@freeswitch.org>
*/Twitter: @FreeSWITCH , @briankwest/* http://www.freeswitchbook.com <http://www.freeswitchbook.com/> http://www.freeswitchcookbook.com <http://www.freeswitchcookbook.com/> https://www.gofundme.com/freeswitch_ubuntu <https://www.gofundme.com/freeswitch_ubuntu>
Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch>
*T:*+19184209001 <tel:%28918%29%20420-9001> | *F:*+19184209002 <tel:%28918%29%20420-9002> | *M:*+1918424WEST (9378) *Skype:*briankwest
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
--
*/Brian West/* brian@freeswitch.org <mailto:brian@freeswitch.org>
*/Twitter: @FreeSWITCH , @briankwest/* http://www.freeswitchbook.com <http://www.freeswitchbook.com/> http://www.freeswitchcookbook.com <http://www.freeswitchcookbook.com/> https://www.gofundme.com/freeswitch_ubuntu
Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch>
*T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *Skype:*briankwest
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
We don't support T.38 only invites. You have to setup G711 then reinvite. /b On Tue, Mar 28, 2017 at 6:34 AM, Yu Boot <yu@yu-boot.ru> wrote:
Recently updated to 1.6.15 and I've got similiar problem. Asterisk now rejects calls with T.38 in initial INVITE with "488 Not Acceptable Here" message. Fortunately, I can "delete" this wrong T.38 in SDP on a softswitch before FS.
27.03.2017 21:49, David Ponzone пишет:
Brian,
I noticed a behavior change with t38 between 1.6.6 and 1.6.15. With 1.6.15, if I receive a INVITE including PCMA/PCMU/t38, it got rejected with T37 REFUSE. If I enable T38 in vars.xml, it’s still rejected with T38 NOT POSSIBLE ON REQUEST.
Is it related to the change you mentioned ?
Thank you
David Ponzone Direction Technique email: david.ponzone@ipeva.fr tel: 01 74 03 18 97 gsm: 06 66 98 76 34
Service Client IPeva tel: 0811 46 26 26 www.ipeva.fr - www.ipeva-studio.com
*Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. **IPeva** décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.*
Le 23 janv. 2017 à 20:59, Brian West <brian@freeswitch.org> a écrit :
You do NOT want 1.6.13 PERIOD if you're doing faxes or anything t.38 related. You're in for some pain.
Use 1.6.14 or v1.6 branch which also has the final patches for 1.6.15.
/b
On Mon, Jan 23, 2017 at 12:55 PM, Yehavi Bourvine < yehavi.bourvine@gmail.com> wrote:
Hi Brian,
Thanks for informing us. I just switched back to 1.6.13 an hour ago due to users complaints (and did not have the time yet to dig more). However, I have the following settings for all users:
<action application="set" data="fax_enable_t38_request=true"/> <action application="set" data="fax_enable_t38=true"/>
which, according to your message above, should work ok. Anyway, I'll wait to 1.6.15...
Thanks, __Yehavi:
2017-01-23 19:03 GMT+02:00 Brian West <brian@freeswitch.org>:
To clarify this work around will work on 1.6.14:
If you wish to retain the previous behavior you can set fax_enable_t38=true in your vars.xml, You can also not set that and just set refuse_t38=true if you wish to never do t.38.
/b
On Mon, Jan 23, 2017 at 9:26 AM, Brian West <brian@freeswitch.org> wrote:
FreeSWITCHers,
In 1.6.14 we did a slight behavior change related to T.38 re-invite acceptance. Before 1.6.14 we would by default accept the re-invite even if t38 wasn't enabled and switch to UDPTL mode. This was an incorrect behavior to do by default.
But one caveat in 1.6.14, We by default 488 the fax but switch the media mode to UDPTL which is also a bad behavior fixed in (FS-9943) slated for 1.6.15.
If you wish to retain the previous behavior you can set fax_enable_t38=true in your vars.xml, You can also not set that and just set refuse_t38=true if you wish to never do t.38.
These default behaviors are fixed in our next release 1.6.15.
Thanks,
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com https://www.gofundme.com/freeswitch_ubuntu
Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch>
*T:*+19184209001 <%28918%29%20420-9001> | *F:*+19184209002 <%28918%29%20420-9002> | *M:*+1918424WEST (9378) *Skype:*briankwest
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com https://www.gofundme.com/freeswitch_ubuntu
Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch>
*T:*+19184209001 <%28918%29%20420-9001> | *F:*+19184209002 <%28918%29%20420-9002> | *M:*+1918424WEST (9378) *Skype:*briankwest
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com https://www.gofundme.com/freeswitch_ubuntu
Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch>
*T:*+19184209001 <(918)%20420-9001> | *F:*+19184209002 <(918)%20420-9002> | *M:*+1918424WEST (9378) *Skype:*briankwest _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.orghttp://www.freeswitchsolutions.com
Official FreeSWITCH Siteshttp://www.freeswitch.orghttp://confluence.freeswitch.orghttp://www.cluecon....
FreeSWITCH-users mailing listFreeSWITCH-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- *Brian West* brian@freeswitch.org *Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com Allison prompts for FreeSWITCH: *https://www.gofundme.com/allison-prompts-for-freeswitch* <https://www.gofundme.com/allison-prompts-for-freeswitch> Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch> *T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *Skype:*briankwest
There is nothing wrong with sending T.38 in the initial invite, if the call is from something that knows T.38 is usable at the very start of the call. However, its best avoided, as so much equipment treats this as an error condition. Regards, Steve On 03/28/2017 07:34 PM, Yu Boot wrote:
Recently updated to 1.6.15 and I've got similiar problem. Asterisk now rejects calls with T.38 in initial INVITE with "488 Not Acceptable Here" message. Fortunately, I can "delete" this wrong T.38 in SDP on a softswitch before FS.
Who knows we could probably make it work, but I have nothing that does this. I just have avoided it due to how its usually treated. On Tue, Mar 28, 2017 at 12:18 PM, Steve Underwood <steveu@coppice.org> wrote:
There is nothing wrong with sending T.38 in the initial invite, if the call is from something that knows T.38 is usable at the very start of the call. However, its best avoided, as so much equipment treats this as an error condition.
Regards, Steve
On 03/28/2017 07:34 PM, Yu Boot wrote:
Recently updated to 1.6.15 and I've got similiar problem. Asterisk now rejects calls with T.38 in initial INVITE with "488 Not Acceptable Here" message. Fortunately, I can "delete" this wrong T.38 in SDP on a softswitch before FS.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- *Brian West* brian@freeswitch.org *Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com Allison prompts for FreeSWITCH: *https://www.gofundme.com/allison-prompts-for-freeswitch* <https://www.gofundme.com/allison-prompts-for-freeswitch> Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch> *T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *Skype:*briankwest
Brian, could you please confirm if there is a way to accept T38 in initial invite with FS 1.6.15, and if not, which version I have to downgrade to in order to get this behavior back (I really need it and can’t make it without it) ? Thank you David Ponzone Direction Technique email: david.ponzone@ipeva.fr <mailto:david.ponzone@ipeva.fr> tel: 01 74 03 18 97 gsm: 06 66 98 76 34 Service Client IPeva tel: 0811 46 26 26 www.ipeva.fr <blocked::http://www.ipeva.fr/> - www.ipeva-studio.com <blocked::http://www.ipeva-studio.com/> Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.
Le 28 mars 2017 à 20:46, Brian West <brian@freeswitch.org> a écrit :
Who knows we could probably make it work, but I have nothing that does this. I just have avoided it due to how its usually treated.
On Tue, Mar 28, 2017 at 12:18 PM, Steve Underwood <steveu@coppice.org <mailto:steveu@coppice.org>> wrote: There is nothing wrong with sending T.38 in the initial invite, if the call is from something that knows T.38 is usable at the very start of the call. However, its best avoided, as so much equipment treats this as an error condition.
Regards, Steve
On 03/28/2017 07:34 PM, Yu Boot wrote:
Recently updated to 1.6.15 and I've got similiar problem. Asterisk now rejects calls with T.38 in initial INVITE with "488 Not Acceptable Here" message. Fortunately, I can "delete" this wrong T.38 in SDP on a softswitch before FS.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
-- Brian West brian@freeswitch.org <mailto:brian@freeswitch.org> Twitter: @FreeSWITCH , @briankwest
http://www.freeswitchbook.com <http://www.freeswitchbook.com/> http://www.freeswitchcookbook.com <http://www.freeswitchcookbook.com/>
Allison prompts for FreeSWITCH:
https://www.gofundme.com/allison-prompts-for-freeswitch <https://www.gofundme.com/allison-prompts-for-freeswitch> Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch> T:+19184209001 | F:+19184209002 | M:+1918424WEST (9378) Skype:briankwest
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Could anyone confirm that ? I read and read again the Release Notes and I see nothing warning that a INVITE request with T38 would now be declined. David Ponzone Direction Technique email: david.ponzone@ipeva.fr <mailto:david.ponzone@ipeva.fr> tel: 01 74 03 18 97 gsm: 06 66 98 76 34 Service Client IPeva tel: 0811 46 26 26 www.ipeva.fr <blocked::http://www.ipeva.fr/> - www.ipeva-studio.com <blocked::http://www.ipeva-studio.com/> Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.
Le 28 mars 2017 à 22:47, David Ponzone <david.ponzone@ipeva.fr> a écrit :
Brian,
could you please confirm if there is a way to accept T38 in initial invite with FS 1.6.15, and if not, which version I have to downgrade to in order to get this behavior back (I really need it and can’t make it without it) ?
Thank you
David Ponzone Direction Technique email: david.ponzone@ipeva.fr <mailto:david.ponzone@ipeva.fr> tel: 01 74 03 18 97 gsm: 06 66 98 76 34
Service Client IPeva tel: 0811 46 26 26 www.ipeva.fr <blocked::http://www.ipeva.fr/> - www.ipeva-studio.com <blocked::http://www.ipeva-studio.com/>
Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.
Le 28 mars 2017 à 20:46, Brian West <brian@freeswitch.org <mailto:brian@freeswitch.org>> a écrit :
Who knows we could probably make it work, but I have nothing that does this. I just have avoided it due to how its usually treated.
On Tue, Mar 28, 2017 at 12:18 PM, Steve Underwood <steveu@coppice.org <mailto:steveu@coppice.org>> wrote: There is nothing wrong with sending T.38 in the initial invite, if the call is from something that knows T.38 is usable at the very start of the call. However, its best avoided, as so much equipment treats this as an error condition.
Regards, Steve
On 03/28/2017 07:34 PM, Yu Boot wrote:
Recently updated to 1.6.15 and I've got similiar problem. Asterisk now rejects calls with T.38 in initial INVITE with "488 Not Acceptable Here" message. Fortunately, I can "delete" this wrong T.38 in SDP on a softswitch before FS.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
-- Brian West brian@freeswitch.org <mailto:brian@freeswitch.org> Twitter: @FreeSWITCH , @briankwest
http://www.freeswitchbook.com <http://www.freeswitchbook.com/> http://www.freeswitchcookbook.com <http://www.freeswitchcookbook.com/>
Allison prompts for FreeSWITCH:
https://www.gofundme.com/allison-prompts-for-freeswitch <https://www.gofundme.com/allison-prompts-for-freeswitch> Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch> T:+19184209001 | F:+19184209002 | M:+1918424WEST (9378) Skype:briankwest
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Yes, its exactly this, If you try what I outlined you can regain the previous behavior. It was wrong to blindly accept t.38 and switch over. :) Plus we handle the fallback correctly now. On Mon, Mar 27, 2017 at 1:49 PM, David Ponzone <david.ponzone@ipeva.fr> wrote:
Brian,
I noticed a behavior change with t38 between 1.6.6 and 1.6.15. With 1.6.15, if I receive a INVITE including PCMA/PCMU/t38, it got rejected with T37 REFUSE. If I enable T38 in vars.xml, it’s still rejected with T38 NOT POSSIBLE ON REQUEST.
Is it related to the change you mentioned ?
Thank you
David Ponzone Direction Technique email: david.ponzone@ipeva.fr tel: 01 74 03 18 97 gsm: 06 66 98 76 34
Service Client IPeva tel: 0811 46 26 26 www.ipeva.fr - www.ipeva-studio.com
*Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. **IPeva** décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.*
Le 23 janv. 2017 à 20:59, Brian West <brian@freeswitch.org> a écrit :
You do NOT want 1.6.13 PERIOD if you're doing faxes or anything t.38 related. You're in for some pain.
Use 1.6.14 or v1.6 branch which also has the final patches for 1.6.15.
/b
On Mon, Jan 23, 2017 at 12:55 PM, Yehavi Bourvine < yehavi.bourvine@gmail.com> wrote:
Hi Brian,
Thanks for informing us. I just switched back to 1.6.13 an hour ago due to users complaints (and did not have the time yet to dig more). However, I have the following settings for all users:
<action application="set" data="fax_enable_t38_request=true"/> <action application="set" data="fax_enable_t38=true"/>
which, according to your message above, should work ok. Anyway, I'll wait to 1.6.15...
Thanks, __Yehavi:
2017-01-23 19:03 GMT+02:00 Brian West <brian@freeswitch.org>:
To clarify this work around will work on 1.6.14:
If you wish to retain the previous behavior you can set fax_enable_t38=true in your vars.xml, You can also not set that and just set refuse_t38=true if you wish to never do t.38.
/b
On Mon, Jan 23, 2017 at 9:26 AM, Brian West <brian@freeswitch.org> wrote:
FreeSWITCHers,
In 1.6.14 we did a slight behavior change related to T.38 re-invite acceptance. Before 1.6.14 we would by default accept the re-invite even if t38 wasn't enabled and switch to UDPTL mode. This was an incorrect behavior to do by default.
But one caveat in 1.6.14, We by default 488 the fax but switch the media mode to UDPTL which is also a bad behavior fixed in (FS-9943) slated for 1.6.15.
If you wish to retain the previous behavior you can set fax_enable_t38=true in your vars.xml, You can also not set that and just set refuse_t38=true if you wish to never do t.38.
These default behaviors are fixed in our next release 1.6.15.
Thanks,
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com https://www.gofundme.com/freeswitch_ubuntu
Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch>
*T:*+19184209001 <(918)%20420-9001> | *F:*+19184209002 <(918)%20420-9002> | *M:*+1918424WEST (9378) *Skype:*briankwest
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com https://www.gofundme.com/freeswitch_ubuntu
Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch>
*T:*+19184209001 <(918)%20420-9001> | *F:*+19184209002 <(918)%20420-9002> | *M:*+1918424WEST (9378) *Skype:*briankwest
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com https://www.gofundme.com/freeswitch_ubuntu
Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch>
*T:*+19184209001 <(918)%20420-9001> | *F:*+19184209002 <(918)%20420-9002> | *M:*+1918424WEST (9378) *Skype:*briankwest _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- *Brian West* brian@freeswitch.org *Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com Allison prompts for FreeSWITCH: *https://www.gofundme.com/allison-prompts-for-freeswitch* <https://www.gofundme.com/allison-prompts-for-freeswitch> Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch> *T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *Skype:*briankwest
Brian, Ok so if I enable fax_enable_t38=true in vars.xml, FS will accept again SDP with PCMA/PCMA/T38 ? (sorry but I have no choice, the fax server sending the call cannot be patched) Restart needed ? I ask because I already added it and did reloadxml, but the issue is still there. David Ponzone Direction Technique email: david.ponzone@ipeva.fr <mailto:david.ponzone@ipeva.fr> tel: 01 74 03 18 97 gsm: 06 66 98 76 34 Service Client IPeva tel: 0811 46 26 26 www.ipeva.fr <blocked::http://www.ipeva.fr/> - www.ipeva-studio.com <blocked::http://www.ipeva-studio.com/> Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.
Le 28 mars 2017 à 16:22, Brian West <brian@freeswitch.org> a écrit :
Yes, its exactly this, If you try what I outlined you can regain the previous behavior. It was wrong to blindly accept t.38 and switch over. :) Plus we handle the fallback correctly now.
On Mon, Mar 27, 2017 at 1:49 PM, David Ponzone <david.ponzone@ipeva.fr <mailto:david.ponzone@ipeva.fr>> wrote: Brian,
I noticed a behavior change with t38 between 1.6.6 and 1.6.15. With 1.6.15, if I receive a INVITE including PCMA/PCMU/t38, it got rejected with T37 REFUSE. If I enable T38 in vars.xml, it’s still rejected with T38 NOT POSSIBLE ON REQUEST.
Is it related to the change you mentioned ?
Thank you
David Ponzone Direction Technique email: david.ponzone@ipeva.fr <mailto:david.ponzone@ipeva.fr> tel: 01 74 03 18 97 gsm: 06 66 98 76 34
Service Client IPeva tel: 0811 46 26 26 www.ipeva.fr <> - www.ipeva-studio.com <>
Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.
Le 23 janv. 2017 à 20:59, Brian West <brian@freeswitch.org <mailto:brian@freeswitch.org>> a écrit :
You do NOT want 1.6.13 PERIOD if you're doing faxes or anything t.38 related. You're in for some pain.
Use 1.6.14 or v1.6 branch which also has the final patches for 1.6.15.
/b
On Mon, Jan 23, 2017 at 12:55 PM, Yehavi Bourvine <yehavi.bourvine@gmail.com <mailto:yehavi.bourvine@gmail.com>> wrote: Hi Brian,
Thanks for informing us. I just switched back to 1.6.13 an hour ago due to users complaints (and did not have the time yet to dig more). However, I have the following settings for all users:
<action application="set" data="fax_enable_t38_request=true"/> <action application="set" data="fax_enable_t38=true"/>
which, according to your message above, should work ok. Anyway, I'll wait to 1.6.15...
Thanks, __Yehavi:
2017-01-23 19:03 GMT+02:00 Brian West <brian@freeswitch.org <mailto:brian@freeswitch.org>>: To clarify this work around will work on 1.6.14:
If you wish to retain the previous behavior you can set fax_enable_t38=true in your vars.xml, You can also not set that and just set refuse_t38=true if you wish to never do t.38.
/b
On Mon, Jan 23, 2017 at 9:26 AM, Brian West <brian@freeswitch.org <mailto:brian@freeswitch.org>> wrote: FreeSWITCHers,
In 1.6.14 we did a slight behavior change related to T.38 re-invite acceptance. Before 1.6.14 we would by default accept the re-invite even if t38 wasn't enabled and switch to UDPTL mode. This was an incorrect behavior to do by default.
But one caveat in 1.6.14, We by default 488 the fax but switch the media mode to UDPTL which is also a bad behavior fixed in (FS-9943) slated for 1.6.15.
If you wish to retain the previous behavior you can set fax_enable_t38=true in your vars.xml, You can also not set that and just set refuse_t38=true if you wish to never do t.38.
These default behaviors are fixed in our next release 1.6.15.
Thanks,
-- Brian West brian@freeswitch.org <mailto:brian@freeswitch.org>
Twitter: @FreeSWITCH , @briankwest http://www.freeswitchbook.com <http://www.freeswitchbook.com/> http://www.freeswitchcookbook.com <http://www.freeswitchcookbook.com/> https://www.gofundme.com/freeswitch_ubuntu <https://www.gofundme.com/freeswitch_ubuntu> Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch> T:+19184209001 <tel:(918)%20420-9001> | F:+19184209002 <tel:(918)%20420-9002> | M:+1918424WEST (9378) Skype:briankwest
-- Brian West brian@freeswitch.org <mailto:brian@freeswitch.org>
Twitter: @FreeSWITCH , @briankwest http://www.freeswitchbook.com <http://www.freeswitchbook.com/> http://www.freeswitchcookbook.com <http://www.freeswitchcookbook.com/> https://www.gofundme.com/freeswitch_ubuntu <https://www.gofundme.com/freeswitch_ubuntu> Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch> T:+19184209001 <tel:(918)%20420-9001> | F:+19184209002 <tel:(918)%20420-9002> | M:+1918424WEST (9378) Skype:briankwest
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
-- Brian West brian@freeswitch.org <mailto:brian@freeswitch.org>
Twitter: @FreeSWITCH , @briankwest http://www.freeswitchbook.com <http://www.freeswitchbook.com/> http://www.freeswitchcookbook.com <http://www.freeswitchcookbook.com/> https://www.gofundme.com/freeswitch_ubuntu <https://www.gofundme.com/freeswitch_ubuntu> Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch> T:+19184209001 <tel:(918)%20420-9001> | F:+19184209002 <tel:(918)%20420-9002> | M:+1918424WEST (9378) Skype:briankwest
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
-- Brian West brian@freeswitch.org <mailto:brian@freeswitch.org> Twitter: @FreeSWITCH , @briankwest
http://www.freeswitchbook.com <http://www.freeswitchbook.com/> http://www.freeswitchcookbook.com <http://www.freeswitchcookbook.com/>
Allison prompts for FreeSWITCH:
https://www.gofundme.com/allison-prompts-for-freeswitch <https://www.gofundme.com/allison-prompts-for-freeswitch> Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch> T:+19184209001 | F:+19184209002 | M:+1918424WEST (9378) Skype:briankwest
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Its not coded to even react and activate T.38 on an initial invite. You'll have to talk to your vendor about that fax server thats sending the call, I do not believe that particular way worked in previous releases either. /b On Tue, Mar 28, 2017 at 10:47 AM, David Ponzone <david.ponzone@ipeva.fr> wrote:
Brian,
Ok so if I enable fax_enable_t38=true in vars.xml, FS will accept again SDP with PCMA/PCMA/T38 ? (sorry but I have no choice, the fax server sending the call cannot be patched) Restart needed ? I ask because I already added it and did reloadxml, but the issue is still there.
David Ponzone Direction Technique email: david.ponzone@ipeva.fr tel: 01 74 03 18 97 gsm: 06 66 98 76 34
Service Client IPeva tel: 0811 46 26 26 www.ipeva.fr - www.ipeva-studio.com
*Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. **IPeva** décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.*
Le 28 mars 2017 à 16:22, Brian West <brian@freeswitch.org> a écrit :
Yes, its exactly this, If you try what I outlined you can regain the previous behavior. It was wrong to blindly accept t.38 and switch over. :) Plus we handle the fallback correctly now.
On Mon, Mar 27, 2017 at 1:49 PM, David Ponzone <david.ponzone@ipeva.fr> wrote:
Brian,
I noticed a behavior change with t38 between 1.6.6 and 1.6.15. With 1.6.15, if I receive a INVITE including PCMA/PCMU/t38, it got rejected with T37 REFUSE. If I enable T38 in vars.xml, it’s still rejected with T38 NOT POSSIBLE ON REQUEST.
Is it related to the change you mentioned ?
Thank you
David Ponzone Direction Technique email: david.ponzone@ipeva.fr tel: 01 74 03 18 97 gsm: 06 66 98 76 34
Service Client IPeva tel: 0811 46 26 26 www.ipeva.fr - www.ipeva-studio.com
*Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. **IPeva** décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.*
Le 23 janv. 2017 à 20:59, Brian West <brian@freeswitch.org> a écrit :
You do NOT want 1.6.13 PERIOD if you're doing faxes or anything t.38 related. You're in for some pain.
Use 1.6.14 or v1.6 branch which also has the final patches for 1.6.15.
/b
On Mon, Jan 23, 2017 at 12:55 PM, Yehavi Bourvine < yehavi.bourvine@gmail.com> wrote:
Hi Brian,
Thanks for informing us. I just switched back to 1.6.13 an hour ago due to users complaints (and did not have the time yet to dig more). However, I have the following settings for all users:
<action application="set" data="fax_enable_t38_request=true"/> <action application="set" data="fax_enable_t38=true"/>
which, according to your message above, should work ok. Anyway, I'll wait to 1.6.15...
Thanks, __Yehavi:
2017-01-23 19:03 GMT+02:00 Brian West <brian@freeswitch.org>:
To clarify this work around will work on 1.6.14:
If you wish to retain the previous behavior you can set fax_enable_t38=true in your vars.xml, You can also not set that and just set refuse_t38=true if you wish to never do t.38.
/b
On Mon, Jan 23, 2017 at 9:26 AM, Brian West <brian@freeswitch.org> wrote:
FreeSWITCHers,
In 1.6.14 we did a slight behavior change related to T.38 re-invite acceptance. Before 1.6.14 we would by default accept the re-invite even if t38 wasn't enabled and switch to UDPTL mode. This was an incorrect behavior to do by default.
But one caveat in 1.6.14, We by default 488 the fax but switch the media mode to UDPTL which is also a bad behavior fixed in (FS-9943) slated for 1.6.15.
If you wish to retain the previous behavior you can set fax_enable_t38=true in your vars.xml, You can also not set that and just set refuse_t38=true if you wish to never do t.38.
These default behaviors are fixed in our next release 1.6.15.
Thanks,
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com https://www.gofundme.com/freeswitch_ubuntu
Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch>
*T:*+19184209001 <(918)%20420-9001> | *F:*+19184209002 <(918)%20420-9002> | *M:*+1918424WEST (9378) *Skype:*briankwest
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com https://www.gofundme.com/freeswitch_ubuntu
Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch>
*T:*+19184209001 <(918)%20420-9001> | *F:*+19184209002 <(918)%20420-9002> | *M:*+1918424WEST (9378) *Skype:*briankwest
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/free switch-users http://www.freeswitch.org
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com https://www.gofundme.com/freeswitch_ubuntu
Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch>
*T:*+19184209001 <(918)%20420-9001> | *F:*+19184209002 <(918)%20420-9002> | *M:*+1918424WEST (9378) *Skype:*briankwest _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest*
http://www.freeswitchbook.com http://www.freeswitchcookbook.com
Allison prompts for FreeSWITCH:
*https://www.gofundme.com/allison-prompts-for-freeswitch* <https://www.gofundme.com/allison-prompts-for-freeswitch>
Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch>
*T:*+19184209001 <(918)%20420-9001> | *F:*+19184209002 <(918)%20420-9002> | *M:*+1918424WEST (9378) *Skype:*briankwest _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- *Brian West* brian@freeswitch.org *Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com Allison prompts for FreeSWITCH: *https://www.gofundme.com/allison-prompts-for-freeswitch* <https://www.gofundme.com/allison-prompts-for-freeswitch> Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch> *T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *Skype:*briankwest
participants (5)
-
Brian West
-
David Ponzone
-
Steve Underwood
-
Yehavi Bourvine
-
Yu Boot