Hi, You can do it with the Portech registered on FS as a regular endpoint then bridge to it as below or similar <extension name="gsm"> <condition field="destination_number" expression="^9(.*)$"> <action application="set" data="hangup_after_bridge=true"/> <action application="bridge" data="sofia/internal/1005^$1@${domain}"> where the Portech registers as 1005 and I prefix the number I wish to dial with 9 or alternatively just bridge directly to it without having to register <action application="bridge" data="sofia/default/$1@192.168.1.3:5060"/> Where 192.168.1.3 is the Portech In both cases you need to configure the Portech Lan to Mobile Table as below Item URL Call Num 0 192.168.1.2 # where 192.168.1.2 is my FS box Steve

Message: 5 Date: Thu, 18 Mar 2010 13:21:09 +0100 From: rentmycoder rentmycoder <rentmycoder@gmail.com> Subject: [Freeswitch-users] how to dial out through a local sip        endpoint -      mv372 mobile gateway adapter To: freeswitch-users@lists.freeswitch.org Message-ID:        <50e456911003180521je008a2dme94fcc6901a04b99@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1

Hi guys, Freeswitch rocks! I've registered an Portech mv-372 mobile adapter to FS as an internal user as userid/extension=5000. How to dial out through this endpint?

In asterisk I've used Dial(sip/1234567@5000) where 1234567 is the phone no to call...

In FS: bridge(sophia/internal/1234567@5000) mod_dptools: normal_temporery_failure

any ideas how to do the bridge? or should I setup the adapter as a gateway profile?

Just to make sure the adapter is ok i've tested it using asterisk and it worked and was set up like this: http://www.voip-info.org/wiki/view/Setup+MV-370+GSM+Gateway+with+Asterisk

------------------------------

Message: 6 Date: Thu, 18 Mar 2010 08:22:10 -0400 From: "Todd" <phunk0000@hotmail.com> Subject: [Freeswitch-users] FS Best practices To: "FreeSWITCH-users@lists. freeswitch. org "        <FreeSWITCH-users@lists.freeswitch.org> Message-ID: <BLU110-DS11B84F16B12464595A3B07A72B0@phx.gbl> Content-Type: text/plain; charset="us-ascii"

Hey List, still kinda new to this whole deal, looking for some advice.  We are building a website that needs to interact with FS.  Not looking for specific instructions just opinions about the best practices for doing things like click to dial from a web page, calling CDR records to web applications to display customers stats and general web integration.  Does this all need to be done using scripting languages like Lua or Perl, or can you directly integrate FS with a website in some other manner. Again, just getting into all this, but having a blast learning FS, config and power rock!  Anyhow, some places or things I should start looking into would be greatly appreciated.  Thanks List!