For example, I set rtp-start and end port in switch.conf.xml from 16000-32000 but When I register a phone it uses port above 32000. example on a register sip trace : Via: SIP/2.0/UDP 10.10.10.10:52641;rport=52641 Any idea ? ----- Original Message ----- From: "Madovsky" <infos@madovsky.org> To: <freeswitch-users@lists.freeswitch.org> Sent: Sunday, March 21, 2010 11:12 PM Subject: Re: [Freeswitch-users] rtp timeout yet
Hi Metik,
Thanks for your answer. Just wondering which rtp port FS use really. on the sip trace I can see often rtp port up to 32768 (like 50434 etc..) so it should be a problem since I use apache with port 50050:60100 on the same IP as FS.
----- Original Message ----- From: "Metik" <freeswitch-users-list@metik.com> To: <freeswitch-users@lists.freeswitch.org> Sent: Sunday, March 21, 2010 3:46 PM Subject: Re: [Freeswitch-users] rtp timeout yet
I haven't followed this particular thread very closely but are you sure there are no port conflicts exhibited in the SDP? This is UDP after all and unlike TCP, binding is exclusive and port selection would then need to take in account those ports already in use (the endpoint and FS would be pretty much flying blind if the endpoint is not a local process).
I would suggest reviewing your endpoint configurations and making sure that they are using unique (rtp/media) port ranges. One would think that if the endpoint shares the same global IP address as used by FS and it is not a (softphone) process running on the same physical box, then it would be communicating with FS using its private IP. Does both the signaling and media traffic traverse (i.e. routed) through a broadband router that sits in front of both FS and the endpoint or is it sent (i.e. forwarded) directly?
-metik
Madovsky wrote:
last trunk, remove current conf folder and reinstalled the default one after make install. I stopped iptables, connect 1000 to 1001 on port 5060, but after rtp-timeout it closes yet. sip trace after the rtp timeout SIP/2.0 481 Call Does Not Exist I start to be very frustrated.... ------------------------------------------------------------------------
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Really? Are you really that silly? RTP has nothing to do with the signaling nor does it have a single thing to do with restricting the client side ports. Pay closer attention the rtp port range is the FreeSWITCH side of things... the client side choices can not and will not be controlled by any setting you can do in the FreeSWITCH config files. /b On Mar 21, 2010, at 10:29 PM, Madovsky wrote:
For example,
I set rtp-start and end port in switch.conf.xml from 16000-32000 but When I register a phone it uses port above 32000. example on a register sip trace :
Via: SIP/2.0/UDP 10.10.10.10:52641;rport=52641
Any idea ?
Just to say to you, I know VOIP since 2 months.... thanks for your appreciation... ----- Original Message ----- From: "Brian West" <brian@freeswitch.org> To: <freeswitch-users@lists.freeswitch.org> Sent: Sunday, March 21, 2010 11:40 PM Subject: Re: [Freeswitch-users] rtp timeout yet
Really? Are you really that silly? RTP has nothing to do with the signaling nor does it have a single thing to do with restricting the client side ports. Pay closer attention the rtp port range is the FreeSWITCH side of things... the client side choices can not and will not be controlled by any setting you can do in the FreeSWITCH config files.
/b
On Mar 21, 2010, at 10:29 PM, Madovsky wrote:
For example,
I set rtp-start and end port in switch.conf.xml from 16000-32000 but When I register a phone it uses port above 32000. example on a register sip trace :
Via: SIP/2.0/UDP 10.10.10.10:52641;rport=52641
Any idea ?
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
It shows! ;) VoIP / Telephony isn't an easy thing to wrap your head around. /b On Mar 21, 2010, at 10:59 PM, Madovsky wrote:
Just to say to you, I know VOIP since 2 months.... thanks for your appreciation...
----- Original Message ----- From: "Brian West" <brian@freeswitch.org> To: <freeswitch-users@lists.freeswitch.org> Sent: Sunday, March 21, 2010 11:40 PM Subject: Re: [Freeswitch-users] rtp timeout yet
Really? Are you really that silly? RTP has nothing to do with the signaling nor does it have a single thing to do with restricting the client side ports. Pay closer attention the rtp port range is the FreeSWITCH side of things... the client side choices can not and will not be controlled by any setting you can do in the FreeSWITCH config files.
/b
thanks for your advice ! ----- Original Message ----- From: Brian West To: freeswitch-users@lists.freeswitch.org Sent: Monday, March 22, 2010 12:10 AM Subject: Re: [Freeswitch-users] rtp timeout yet It shows! ;) VoIP / Telephony isn't an easy thing to wrap your head around. /b On Mar 21, 2010, at 10:59 PM, Madovsky wrote: Just to say to you, I know VOIP since 2 months.... thanks for your appreciation... ----- Original Message ----- From: "Brian West" <brian@freeswitch.org> To: <freeswitch-users@lists.freeswitch.org> Sent: Sunday, March 21, 2010 11:40 PM Subject: Re: [Freeswitch-users] rtp timeout yet Really? Are you really that silly? RTP has nothing to do with the signaling nor does it have a single thing to do with restricting the client side ports. Pay closer attention the rtp port range is the FreeSWITCH side of things... the client side choices can not and will not be controlled by any setting you can do in the FreeSWITCH config files. /b ------------------------------------------------------------------------------ _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
So do you have an answer to the problem I explained on this thread ? ----- Original Message ----- From: Brian West To: freeswitch-users@lists.freeswitch.org Sent: Monday, March 22, 2010 12:10 AM Subject: Re: [Freeswitch-users] rtp timeout yet It shows! ;) VoIP / Telephony isn't an easy thing to wrap your head around. /b On Mar 21, 2010, at 10:59 PM, Madovsky wrote: Just to say to you, I know VOIP since 2 months.... thanks for your appreciation... ----- Original Message ----- From: "Brian West" <brian@freeswitch.org> To: <freeswitch-users@lists.freeswitch.org> Sent: Sunday, March 21, 2010 11:40 PM Subject: Re: [Freeswitch-users] rtp timeout yet Really? Are you really that silly? RTP has nothing to do with the signaling nor does it have a single thing to do with restricting the client side ports. Pay closer attention the rtp port range is the FreeSWITCH side of things... the client side choices can not and will not be controlled by any setting you can do in the FreeSWITCH config files. /b ------------------------------------------------------------------------------ _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Without a full pcap I can only guess you have a network issue. /b On Mar 21, 2010, at 11:20 PM, Madovsky wrote:
So do you have an answer to the problem I explained on this thread ? ----- Original Message ----- From: Brian West To: freeswitch-users@lists.freeswitch.org Sent: Monday, March 22, 2010 12:10 AM Subject: Re: [Freeswitch-users] rtp timeout yet
It shows! ;) VoIP / Telephony isn't an easy thing to wrap your head around.
/b
I think your router losing the state of the registration. What is the router model? Lloyd On Mon, Mar 22, 2010 at 12:37 AM, Brian West <brian@freeswitch.org> wrote:
Without a full pcap I can only guess you have a network issue.
/b
On Mar 21, 2010, at 11:20 PM, Madovsky wrote:
So do you have an answer to the problem I explained on this thread ?
----- Original Message ----- *From:* Brian West <brian@freeswitch.org> *To:* freeswitch-users@lists.freeswitch.org *Sent:* Monday, March 22, 2010 12:10 AM *Subject:* Re: [Freeswitch-users] rtp timeout yet
It shows! ;) VoIP / Telephony isn't an easy thing to wrap your head around.
/b
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
no router ;) I tried with 2 softphone directly from public IP ----- Original Message ----- From: Aloysius Lloyd To: freeswitch-users@lists.freeswitch.org Sent: Monday, March 22, 2010 1:27 AM Subject: Re: [Freeswitch-users] rtp timeout yet I think your router losing the state of the registration. What is the router model? Lloyd On Mon, Mar 22, 2010 at 12:37 AM, Brian West <brian@freeswitch.org> wrote: Without a full pcap I can only guess you have a network issue. /b On Mar 21, 2010, at 11:20 PM, Madovsky wrote: So do you have an answer to the problem I explained on this thread ? ----- Original Message ----- From: Brian West To: freeswitch-users@lists.freeswitch.org Sent: Monday, March 22, 2010 12:10 AM Subject: Re: [Freeswitch-users] rtp timeout yet It shows! ;) VoIP / Telephony isn't an easy thing to wrap your head around. /b _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ------------------------------------------------------------------------------ _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
result with tcpdump -ennqti br0 -T rtp -vvv dst port 5060 10.10.10.132 = softphone1 registered from public IP 11.11.11.= softphone2 registered from public IP 10.10.10.138 = FS 00:d0:04:01:ec:00 > 00:e0:ed:0b:00:c2, IPv4, length 1047: (tos 0x0, ttl 122, id 61054, offset 0, flags [none], proto UDP (17), length 1033) 11.11.11.38.11720 > 10.10.10.138.5060: udp/rtpv1 997 c14 * 22089 1413816435 1768962609 00:d0:04:01:ec:00 > 00:e0:ed:0b:00:c2, IPv4, length 365: (tos 0x0, ttl 122, id 61082, offset 0, flags [none], proto UDP (17), length 351) 11.11.11.38.11720 > 10.10.10.138.5060: udp/rtpv1 315 c3 * 19232 1936289850 825241648 00:d0:04:01:ec:00 > 00:e0:ed:0b:00:c2, IPv4, length 1307: (tos 0x0, ttl 122, id 61083, offset 0, flags [none], proto UDP (17), length 1293) 11.11.11.38.11720 > 10.10.10.138.5060: udp/rtpv1 1257 c14 * 22089 1413816435 1768962609 00:04:23:b5:3f:05 > 00:e0:ed:0b:00:c2, IPv4, length 328: (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 314) 10.10.10.132.59749 > 10.10.10.138.5060: udp/rtpv1 278 c9 * 20527 841887776 825241632 00:04:23:b5:3f:05 > 00:e0:ed:0b:00:c2, IPv4, length 555: (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 541) 10.10.10.132.59749 > 10.10.10.138.5060: udp/rtpv1 505 c9 * 20527 841887776 842018848 00:d0:04:01:ec:00 > 00:e0:ed:0b:00:c2, IPv4, length 748: (tos 0x0, ttl 122, id 62599, offset 0, flags [none], proto UDP (17), length 734) 11.11.11.38.11720 > 10.10.10.138.5060: udp/rtpv1 698 c3 * 19232 1936289850 825241648 00:d0:04:01:ec:00 > 00:e0:ed:0b:00:c2, IPv4, length 46: (tos 0x0, ttl 122, id 62813, offset 0, flags [none], proto UDP (17), length 32) 11.11.11.38.11720 > 10.10.10.138.5060: udp/rtp -8 c10 3338 1936289850 825241648 00:04:23:b5:3f:05 > 00:e0:ed:0b:00:c2, IPv4, length 338: (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 324) 10.10.10.132.59749 > 10.10.10.138.5060: udp/rtpv1 288 c9 * 20527 841887776 842018848 00:04:23:b5:3f:05 > 00:e0:ed:0b:00:c2, IPv4, length 439: (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 425) 10.10.10.132.59749 > 10.10.10.138.5060: udp/rtpv1 389 c25 * 17696 1936289850 1836016735 00:d0:04:01:ec:00 > 00:e0:ed:0b:00:c2, IPv4, length 415: (tos 0x0, ttl 122, id 63102, offset 0, flags [none], proto UDP (17), length 401) 11.11.11.38.11720 > 10.10.10.138.5060: udp/rtpv1 365 c9 * 20527 841887776 842018848 Danke ----- Original Message ----- From: Brian West To: freeswitch-users@lists.freeswitch.org Sent: Monday, March 22, 2010 12:37 AM Subject: Re: [Freeswitch-users] rtp timeout yet Without a full pcap I can only guess you have a network issue. /b On Mar 21, 2010, at 11:20 PM, Madovsky wrote: So do you have an answer to the problem I explained on this thread ? ----- Original Message ----- From: Brian West To: freeswitch-users@lists.freeswitch.org Sent: Monday, March 22, 2010 12:10 AM Subject: Re: [Freeswitch-users] rtp timeout yet It shows! ;) VoIP / Telephony isn't an easy thing to wrap your head around. /b ------------------------------------------------------------------------------ _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Madovsky <infos@madovsky.org> wrote:
result with
tcpdump -ennqti br0 -T rtp -vvv dst port 5060
10.10.10.132 = softphone1 registered from public IP
11.11.11.= softphone2 registered from public IP
10.10.10.138 = FS
Those are private addresses; there's a NAT device involved somewhere, and that's likely to be where your problems are.
I replace public ip by these fake one... ----- Original Message ----- From: "Jason White" <jason@jasonjgw.net> To: <freeswitch-users@lists.freeswitch.org> Sent: Monday, March 22, 2010 1:49 AM Subject: Re: [Freeswitch-users] rtp timeout yet
Madovsky <infos@madovsky.org> wrote:
result with
tcpdump -ennqti br0 -T rtp -vvv dst port 5060
10.10.10.132 = softphone1 registered from public IP
11.11.11.= softphone2 registered from public IP
10.10.10.138 = FS
Those are private addresses; there's a NAT device involved somewhere, and that's likely to be where your problems are.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (4)
-
Aloysius Lloyd
-
Brian West
-
Jason White
-
Madovsky