Hello, I've got two different PAT2T boxes pointing to my FS box. First one works ok while second what gets INCOMPATIBLE_DESTINATION. Looking at INVITE request I am not be able to get the reason. If you see http://pastebin.com/3emQDfER you will get 2 INVITE, first one works while second no. Do you know why? Regards
m=audio 0 RTP/AVP 18 0 2 4 8 96 97 98 100 101. media port is 0 maybe some param to choose port range is wrong ? On Fri, Apr 12, 2013 at 11:42 AM, Juan Antonio Ibañez Santorum < juanito1982@gmail.com> wrote:
Hello,
I've got two different PAT2T boxes pointing to my FS box. First one works ok while second what gets INCOMPATIBLE_DESTINATION. Looking at INVITE request I am not be able to get the reason. If you see http://pastebin.com/3emQDfER you will get 2 INVITE, first one works while second no.
Do you know why? Regards
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
That what the problem. Bad RTP range. Regards 2013/4/12 Anthony Minessale <anthony.minessale@gmail.com>
m=audio 0 RTP/AVP 18 0 2 4 8 96 97 98 100 101.
media port is 0 maybe some param to choose port range is wrong ?
On Fri, Apr 12, 2013 at 11:42 AM, Juan Antonio Ibañez Santorum < juanito1982@gmail.com> wrote:
Hello,
I've got two different PAT2T boxes pointing to my FS box. First one works ok while second what gets INCOMPATIBLE_DESTINATION. Looking at INVITE request I am not be able to get the reason. If you see http://pastebin.com/3emQDfER you will get 2 INVITE, first one works while second no.
Do you know why? Regards
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Sorry for the late reply but I just remembered something about older linksys stuff: There is a bug that under some conditions causes the FLASH to get corupt and the device starts doing all sorts of shit you can't figure out, to fix do the following: 1) Factory reset (**** get ivr prompt enter 73738# (spells reset)) 2) Reload firmware the fast way, hit it w/ upgrade url (http://devip/admin/upgrade?http://pathtotobinfile) 3) Factory reset again 4) re-configure. This should make the weirdness go away. The device can also get to this state if it had its firmware upgraded at some point, and it was not factory reset, both before and after the upgrade. --Dave _____ From: Anthony Minessale [mailto:anthony.minessale@gmail.com] To: FreeSWITCH Users Help [mailto:freeswitch-users@lists.freeswitch.org] Sent: Fri, 12 Apr 2013 09:51:39 -0700 Subject: Re: [Freeswitch-users] PAP2T INCOMPATIBLE_DESTINATION m=audio 0 RTP/AVP 18 0 2 4 8 96 97 98 100 101. media port is 0 maybe some param to choose port range is wrong ? On Fri, Apr 12, 2013 at 11:42 AM, Juan Antonio Ibañez Santorum <juanito1982@gmail.com> wrote: Hello, I've got two different PAT2T boxes pointing to my FS box. First one works ok while second what gets INCOMPATIBLE_DESTINATION. Looking at INVITE request I am not be able to get the reason. If you see http://pastebin.com/3emQDfER you will get 2 INVITE, first one works while second no. Do you know why? Regards _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
Woops I forget to mention if you don't have the firmware handy on some http server, you can always use my copy of the latest. I've had to fix/upgrade them many times in the past 6 years since the final version of the firmware was released. http://yourdeviceip/admin/upgrade?http://64.62.214.101/d0wndl/pap2t-5-1-6.bi... --Dave _____ From: Dave R. Kompel [mailto:drk@drkngs.net] To: FreeSWITCH Users Help [mailto:freeswitch-users@lists.freeswitch.org] Sent: Sun, 14 Apr 2013 09:59:44 -0700 Subject: Re: [Freeswitch-users] PAP2T INCOMPATIBLE_DESTINATION Sorry for the late reply but I just remembered something about older linksys stuff: There is a bug that under some conditions causes the FLASH to get corupt and the device starts doing all sorts of shit you can't figure out, to fix do the following: 1) Factory reset (**** get ivr prompt enter 73738# (spells reset)) 2) Reload firmware the fast way, hit it w/ upgrade url (http://devip/admin/upgrade?http://pathtotobinfile) 3) Factory reset again 4) re-configure. This should make the weirdness go away. The device can also get to this state if it had its firmware upgraded at some point, and it was not factory reset, both before and after the upgrade. --Dave _____ From: Anthony Minessale [mailto:anthony.minessale@gmail.com] To: FreeSWITCH Users Help [mailto:freeswitch-users@lists.freeswitch.org] Sent: Fri, 12 Apr 2013 09:51:39 -0700 Subject: Re: [Freeswitch-users] PAP2T INCOMPATIBLE_DESTINATION m=audio 0 RTP/AVP 18 0 2 4 8 96 97 98 100 101. media port is 0 maybe some param to choose port range is wrong ? On Fri, Apr 12, 2013 at 11:42 AM, Juan Antonio Ibañez Santorum <juanito1982@gmail.com> wrote: Hello, I've got two different PAT2T boxes pointing to my FS box. First one works ok while second what gets INCOMPATIBLE_DESTINATION. Looking at INVITE request I am not be able to get the reason. If you see http://pastebin.com/3emQDfER you will get 2 INVITE, first one works while second no. Do you know why? Regards _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
Never mind, ya'all fuckers on the list and you know who you are, starting DDOSing this host at over 5,000,000 spoofed Syn's so the host is gone... Blackholed, and is NEVER coming back. So for all you assholes reading this list: GO FUCK YOURSELF. Everyone else, thank you and have a nice day :) --Dave _____ From: Dave R. Kompel [mailto:drk@drkngs.net] To: FreeSWITCH Users Help [mailto:freeswitch-users@lists.freeswitch.org] Sent: Sun, 14 Apr 2013 10:16:47 -0700 Subject: Re: [Freeswitch-users] PAP2T INCOMPATIBLE_DESTINATION Woops I forget to mention if you don't have the firmware handy on some http server, you can always use my copy of the latest. I've had to fix/upgrade them many times in the past 6 years since the final version of the firmware was released. http://yourdeviceip/admin/upgrade?http://64.62.214.101/d0wndl/pap2t-5-1-6.bi... --Dave _____ From: Dave R. Kompel [mailto:drk@drkngs.net] To: FreeSWITCH Users Help [mailto:freeswitch-users@lists.freeswitch.org] Sent: Sun, 14 Apr 2013 09:59:44 -0700 Subject: Re: [Freeswitch-users] PAP2T INCOMPATIBLE_DESTINATION Sorry for the late reply but I just remembered something about older linksys stuff: There is a bug that under some conditions causes the FLASH to get corupt and the device starts doing all sorts of shit you can't figure out, to fix do the following: 1) Factory reset (**** get ivr prompt enter 73738# (spells reset)) 2) Reload firmware the fast way, hit it w/ upgrade url (http://devip/admin/upgrade?http://pathtotobinfile) 3) Factory reset again 4) re-configure. This should make the weirdness go away. The device can also get to this state if it had its firmware upgraded at some point, and it was not factory reset, both before and after the upgrade. --Dave _____ From: Anthony Minessale [mailto:anthony.minessale@gmail.com] To: FreeSWITCH Users Help [mailto:freeswitch-users@lists.freeswitch.org] Sent: Fri, 12 Apr 2013 09:51:39 -0700 Subject: Re: [Freeswitch-users] PAP2T INCOMPATIBLE_DESTINATION m=audio 0 RTP/AVP 18 0 2 4 8 96 97 98 100 101. media port is 0 maybe some param to choose port range is wrong ? On Fri, Apr 12, 2013 at 11:42 AM, Juan Antonio Ibañez Santorum <juanito1982@gmail.com> wrote: Hello, I've got two different PAT2T boxes pointing to my FS box. First one works ok while second what gets INCOMPATIBLE_DESTINATION. Looking at INVITE request I am not be able to get the reason. If you see http://pastebin.com/3emQDfER you will get 2 INVITE, first one works while second no. Do you know why? Regards _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
1. DDosing people trying to help someone out is just lame. If you are doing this, please go away. 2. This kind of language on the mailing list is not acceptable. Anyone doing this may be moderated or banned from the list. Mike On Apr 14, 2013, at 3:11 PM, Dave R. Kompel <drk@drkngs.net> wrote:
Never mind, ya'all fuckers on the list and you know who you are, starting DDOSing this host at over 5,000,000 spoofed Syn's so the host is gone... Blackholed, and is NEVER coming back.
So for all you assholes reading this list: GO FUCK YOURSELF.
Everyone else, thank you and have a nice day :)
--Dave
From: Dave R. Kompel [mailto:drk@drkngs.net] To: FreeSWITCH Users Help [mailto:freeswitch-users@lists.freeswitch.org] Sent: Sun, 14 Apr 2013 10:16:47 -0700 Subject: Re: [Freeswitch-users] PAP2T INCOMPATIBLE_DESTINATION
Woops I forget to mention if you don't have the firmware handy on some http server, you can always use my copy of the latest. I've had to fix/upgrade them many times in the past 6 years since the final version of the firmware was released.
http://yourdeviceip/admin/upgrade?http://64.62.214.101/d0wndl/pap2t-5-1-6.bi...
--Dave
From: Dave R. Kompel [mailto:drk@drkngs.net] To: FreeSWITCH Users Help [mailto:freeswitch-users@lists.freeswitch.org] Sent: Sun, 14 Apr 2013 09:59:44 -0700 Subject: Re: [Freeswitch-users] PAP2T INCOMPATIBLE_DESTINATION
Sorry for the late reply but I just remembered something about older linksys stuff:
There is a bug that under some conditions causes the FLASH to get corupt and the device starts doing all sorts of shit you can't figure out, to fix do the following:
1) Factory reset (**** get ivr prompt enter 73738# (spells reset)) 2) Reload firmware the fast way, hit it w/ upgrade url (http://devip/admin/upgrade?http://pathtotobinfile) 3) Factory reset again 4) re-configure.
This should make the weirdness go away.
The device can also get to this state if it had its firmware upgraded at some point, and it was not factory reset, both before and after the upgrade.
--Dave
From: Anthony Minessale [mailto:anthony.minessale@gmail.com] To: FreeSWITCH Users Help [mailto:freeswitch-users@lists.freeswitch.org] Sent: Fri, 12 Apr 2013 09:51:39 -0700 Subject: Re: [Freeswitch-users] PAP2T INCOMPATIBLE_DESTINATION
m=audio 0 RTP/AVP 18 0 2 4 8 96 97 98 100 101. media port is 0 maybe some param to choose port range is wrong ?
On Fri, Apr 12, 2013 at 11:42 AM, Juan Antonio Ibañez Santorum <juanito1982@gmail.com> wrote: Hello,
I've got two different PAT2T boxes pointing to my FS box. First one works ok while second what gets INCOMPATIBLE_DESTINATION. Looking at INVITE request I am not be able to get the reason. If you see http://pastebin.com/3emQDfER you will get 2 INVITE, first one works while second no.
Do you know why? Regards
hello all, i am tryng to listen and talk to a currently connected A-B call. I tried the following: ./fs_cli show calls (to know the uuid) originator 1xxx@sip.server.com &eavesdrop <uuid> this rings the 1xxx phone and then disconnects any idea regards, S.O
That's a conference, not an eavesdrop ain't it? João Mesquita On Sun, Apr 14, 2013 at 4:13 PM, Sherif Omran <sherifomran2000@yahoo.com>wrote:
hello all,
i am tryng to listen and talk to a currently connected A-B call.
I tried the following:
./fs_cli show calls (to know the uuid) originator 1xxx@sip.server.com &eavesdrop <uuid>
this rings the 1xxx phone and then disconnects
any idea regards,
S.O
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Pastebin the debug output of your originate command. I suspect that it will tell you what's happening. -MC On Sun, Apr 14, 2013 at 12:13 PM, Sherif Omran <sherifomran2000@yahoo.com>wrote:
hello all,
i am tryng to listen and talk to a currently connected A-B call.
I tried the following:
./fs_cli show calls (to know the uuid) originator 1xxx@sip.server.com &eavesdrop <uuid>
this rings the 1xxx phone and then disconnects
any idea regards,
S.O
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Michael S Collins Twitter: @mercutioviz http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org
originat*e* 1xxx@sip.server.com &eavesdrop*(*<uuid>*) * or eavesdrop(all) try that* * 2013/4/16 Michael Collins <msc@freeswitch.org>
Pastebin the debug output of your originate command. I suspect that it will tell you what's happening. -MC
On Sun, Apr 14, 2013 at 12:13 PM, Sherif Omran <sherifomran2000@yahoo.com>wrote:
hello all,
i am tryng to listen and talk to a currently connected A-B call.
I tried the following:
./fs_cli show calls (to know the uuid) originator 1xxx@sip.server.com &eavesdrop <uuid>
this rings the 1xxx phone and then disconnects
any idea regards,
S.O
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Michael S Collins Twitter: @mercutioviz http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Are you trying to send one to a fax (t38?), or can you post a debug log from the call that fails.
console loglevel debug
Nick On Apr 12, 2013, at 9:42 AM, Juan Antonio Ibañez Santorum <juanito1982@gmail.com> wrote:
Hello,
I've got two different PAT2T boxes pointing to my FS box. First one works ok while second what gets INCOMPATIBLE_DESTINATION. Looking at INVITE request I am not be able to get the reason. If you see http://pastebin.com/3emQDfER you will get 2 INVITE, first one works while second no.
Do you know why? Regards _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (9)
-
Anthony Minessale
-
Dave R. Kompel
-
João Mesquita
-
Juan Antonio Ibañez Santorum
-
Michael Collins
-
Michael Jerris
-
Nick Vines
-
Regis M
-
Sherif Omran