1. DDosing people trying to help someone out is just lame.  If you are doing this, please go away.
2. This kind of language on the mailing list is not acceptable.  Anyone doing this may be moderated or banned from the list.

Mike

On Apr 14, 2013, at 3:11 PM, Dave R. Kompel <drk@drkngs.net> wrote:

Never mind, ya'all fuckers on the list and you know who you are, starting DDOSing this host at over 5,000,000 spoofed Syn's so the host is gone... Blackholed, and is NEVER coming back.
 
So for all you assholes reading this list: GO FUCK YOURSELF.
 
Everyone else, thank you and have a nice day :)
 
--Dave

From: Dave R. Kompel [mailto:drk@drkngs.net]
To: FreeSWITCH Users Help [mailto:freeswitch-users@lists.freeswitch.org]
Sent: Sun, 14 Apr 2013 10:16:47 -0700
Subject: Re: [Freeswitch-users] PAP2T INCOMPATIBLE_DESTINATION

Woops I forget to mention if you don't have the firmware handy on some http server, you can always use my copy of the latest. I've had to fix/upgrade them many times in the past 6 years since the final version of the firmware was released.
 
 
--Dave

From: Dave R. Kompel [mailto:drk@drkngs.net]
To: FreeSWITCH Users Help [mailto:freeswitch-users@lists.freeswitch.org]
Sent: Sun, 14 Apr 2013 09:59:44 -0700
Subject: Re: [Freeswitch-users] PAP2T INCOMPATIBLE_DESTINATION

Sorry for the late reply but I just remembered something about older linksys stuff:
 
There is a bug that under some conditions causes the FLASH to get corupt and the device starts doing all sorts of shit you can't figure out, to fix do the following:
 
1) Factory reset (**** get ivr prompt enter 73738# (spells reset))
2) Reload firmware the fast way, hit it w/ upgrade url (http://devip/admin/upgrade?http://pathtotobinfile)
3) Factory reset again
4) re-configure.
 
This should make the weirdness go away.
 
The device can also get to this state if it had its firmware upgraded at some point, and it was not factory reset, both before and after the upgrade.
 
--Dave

From: Anthony Minessale [mailto:anthony.minessale@gmail.com]
To: FreeSWITCH Users Help [mailto:freeswitch-users@lists.freeswitch.org]
Sent: Fri, 12 Apr 2013 09:51:39 -0700
Subject: Re: [Freeswitch-users] PAP2T INCOMPATIBLE_DESTINATION

m=audio 0 RTP/AVP 18 0 2 4 8 96 97 98 100 101.
media port is 0 maybe some param to choose port range is wrong ?



On Fri, Apr 12, 2013 at 11:42 AM, Juan Antonio Ibaņez Santorum <juanito1982@gmail.com> wrote:
Hello,

   I've got two different PAT2T boxes pointing to my FS box. First one works ok while second what gets INCOMPATIBLE_DESTINATION. Looking at INVITE request I am not be able to get the reason. If you see http://pastebin.com/3emQDfER you will get 2 INVITE, first one works while second no.

Do you know why?
Regards