Hi Guys, I'm pretty sure this is a Cisco firmware problem (v 8.9) problem but just wanted to check if anyone else has seen this. With Line 1 on the Cisco 7960 registered to FS, when the line buttons is pressed or the "Speaker" button is pressed, it immediately gets a re-order tone instead of a dial-tone. Watching the console on FS, I see an Invite going to "%14" which obv doesn't exist. INVITE sip:%14@192.168.3.80 SIP/2.0 Via: SIP/2.0/UDP 69.201.146.xxx:5062;branch=z9hG4bK121399ed From: "user1" <sip:user1@192.168.3.80

;tag=003094c3e08b02705d7d5000-560be9da To: <sip:%14@192.168.3.80> Call-ID: 003094c3-e08b000a-43fa29c5-5d1840e9@69.201.146.xxx Max-Forwards: 70 Date: Thu, 01 Sep 2011 16:39:30 GMT CSeq: 101 INVITE User-Agent: Cisco-CP7960G/8.0 Contact: <sip:user1@69.201.146.xxx:5062;transport=udp> Expires: 180 Accept: application/sdp Allow: ACK,BYE,CANCEL,INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE Supported: replaces,join,norefersub Content-Length: 278 Content-Type: application/sdp Content-Disposition: session;handling=optional

v=0 o=Cisco-SIPUA 12375 0 IN IP4 69.201.146.xxx s=SIP Call t=0 0 m=audio 19982 RTP/AVP 0 8 18 101 c=IN IP4 69.201.146.xxx a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:18 G729/8000 a=fmtp:18 annexb=no a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15 a=sendrecv When this same account is configured on any other line, pressing the line button brings up a dial-tone. Anyone have any idea why it does that or how to make it not do it? Cheers aeg