Hi Guys,
I'm pretty sure this is a Cisco firmware problem (v 8.9) problem but just wanted to check if anyone else has seen this.
With Line 1 on the Cisco 7960 registered to FS, when the line buttons is pressed or the "Speaker" button is pressed, it immediately gets a re-order tone instead of a dial-tone. Watching the console on FS, I see an Invite going to "%14" which obv doesn't exist.
Via: SIP/2.0/UDP 69.201.146.xxx:5062;branch=z9hG4bK121399ed
Call-ID: 003094c3-e08b000a-43fa29c5-5d1840e9@69.201.146.xxx
Max-Forwards: 70
Date: Thu, 01 Sep 2011 16:39:30 GMT
CSeq: 101 INVITE
User-Agent: Cisco-CP7960G/8.0
Contact: <sip:user1@69.201.146.xxx:5062;transport=udp>
Expires: 180
Accept: application/sdp
Allow: ACK,BYE,CANCEL,INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE
Supported: replaces,join,norefersub
Content-Length: 278
Content-Type: application/sdp
Content-Disposition: session;handling=optional
v=0
o=Cisco-SIPUA 12375 0 IN IP4 69.201.146.xxx
s=SIP Call
t=0 0
m=audio 19982 RTP/AVP 0 8 18 101
c=IN IP4 69.201.146.xxx
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=sendrecv
When this same account is configured on any other line, pressing the line button brings up a dial-tone.
Anyone have any idea why it does that or how to make it not do it?
Cheers
aeg