Do you have mod_sangoma_codec loaded? If so, it'll automatically use the card instead of CPU for transcoding for the supported codecs. You should also avoid having the modules loaded that provide any of the codecs that mod_sangoma_codec provides. i.e. do not load mod_g729, mod_com_g729, mod_g7231, mod_amr, mod_ilbc. The parameters you mentioned only affect how codec negotiation is performed, they don't control transcoding and any settings for those parameter will work with the Sandoma card. Rather importantly disable-transcoding is a bit of a misnomer, it doesn't actually disable transcoding, just attempts to force it not to be needed by forcing the aleg and bleg codecs to match. -Steve On 5 June 2011 15:40, Gustavo Espeche <gustavo.espeche@easyipcall.com>wrote:

Hi some one can do work sangoma d100 transcoding, i installed the card, load the sangoma codec into freeswitch, but i can't do that the freeswitch do a transcoding using sangoma card. I configure my profile <param name="inbound-late-negotiation" value="false"/> <param name="disable-transcoding" value="false"/> if some one configure with success this card i appreciate a lot any advice. Best Regards.

--

Gustavo Espechese EasyIpCall S.R.L. www.easyipcall.com Bv Mitre 517 24° E Cordoba - Argentina Te: +54 - 351 - 4280633

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org