Do you have mod_sangoma_codec loaded? If so, it'll automatically use the card instead of CPU for transcoding for the supported codecs.
You should also avoid having the modules loaded that provide any of the codecs that mod_sangoma_codec provides. i.e. do not load mod_g729, mod_com_g729, mod_g7231, mod_amr, mod_ilbc.
The parameters you mentioned only affect how codec negotiation is performed, they don't control transcoding and any settings for those parameter will work with the Sandoma card. Rather importantly disable-transcoding is a bit of a misnomer, it doesn't actually disable transcoding, just attempts to force it not to be needed by forcing the aleg and bleg codecs to match.
-Steve
Hi some one can do work sangoma d100 transcoding, i installed the card,
load the sangoma codec into freeswitch, but i can't do that the
freeswitch do a transcoding using sangoma card.
I configure my profile
<param name="inbound-late-negotiation" value="false"/>
<param name="disable-transcoding" value="false"/>
if some one configure with success this card i appreciate a lot any
advice.
Best Regards.
--
Gustavo Espechese
EasyIpCall S.R.L.
www.easyipcall.com
Bv Mitre 517 24° E
Cordoba - Argentina
Te: +54 - 351 - 4280633
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org