H.323 Connection
Hello, I am trying to connect to FreeSWITCH by H.323 protcol. I built,installed and loaded the module of mod_h323. but it not work properly. I installed it as follows. (OS, Version info) OS: CentOS Linux release 7.5.1804 (Core) FreeSWITCH: 1.6.2 PTlib: 2.10.9.2 h323plus: 1.27.0 Configure was reference to the following. https://freeswitch.org/confluence/display/FREESWITCH/mod_h323 It is in the following state.(When Call to SIP Extension) - It seems to connection is successfly(Connection established) on Client, but it can not hear any sound. - In Server of FreeSWITCH, the CPU load abnormally increases, and there is the case that service of Freeswith is stopped. I looking for logs of past mailing lists, there are cases of success and failure. http://lists.freeswitch.org/pipermail/freeswitch-users/2016-September/122560... <http://lists.freeswitch.org/pipermail/freeswitch-users/2016-June/120918.html>http://lists.freeswitch.org/pipermail/freeswitch-users/2016-June/120896.html Can you tell me what settings and installation procedures can be successfully connected? Best Regards, Satoh
Hi Satoh, check if your H.323 endpoints are behind a firewall. Freeswitch doesn't support H.460 NAT traversal natively, so you might have to install a GnuGk in front of it to proxy the media data. Regards, Jan -- Jan Willamowius, Founder of the GNU Gatekeeper Project EMail : jan@willamowius.de Website: https://www.gnugk.org Support: https://www.willamowius.com/gnugk-support.html Relaxed Communications GmbH Frahmredder 91, 22393 Hamburg, Germany Geschäftsführer: Jan Willamowius HRB 125261 (Amtsgericht Hamburg) USt-IdNr: DE286003584 satoh.osamu@nttdata-sbc.co.jp wrote:
Hello,
I am trying to connect to FreeSWITCH by H.323 protcol. I built,installed and loaded the module of mod_h323. but it not work properly.
I installed it as follows. (OS, Version info) OS: CentOS Linux release 7.5.1804 (Core) FreeSWITCH: 1.6.2 PTlib: 2.10.9.2 h323plus: 1.27.0
Configure was reference to the following. https://freeswitch.org/confluence/display/FREESWITCH/mod_h323
It is in the following state.(When Call to SIP Extension) - It seems to connection is successfly(Connection established) on Client, but it can not hear any sound. - In Server of FreeSWITCH, the CPU load abnormally increases, and there is the case that service of Freeswith is stopped.
I looking for logs of past mailing lists, there are cases of success and failure. http://lists.freeswitch.org/pipermail/freeswitch-users/2016-September/122560... <http://lists.freeswitch.org/pipermail/freeswitch-users/2016-June/120918.html>http://lists.freeswitch.org/pipermail/freeswitch-users/2016-June/120896.html
Can you tell me what settings and installation procedures can be successfully connected?
Best Regards, Satoh
Hello Jan, Thank you for your reply. Now I using FreeSWITCH on internal network of company only. Therefore, firewall and H.460 NAT have nothing todo with it. I think that the cause of this problem is FreeSWTICH setting or version of library etc, maybe. I tried other version of PTLib and h323plus, (ptlib-2.8.2 + h323plus-20100525, ptlib-trunk + h323plus-trunk) but this problem is not solve. If you are able to connect of H.323, it will be appreciated if you can share information on the environment, settings. Best Regards, Satoh ________________________________ 差出人: Jan Willamowius <jan@willamowius.de> 送信日時: 2018年11月7日 21:41 宛先: 佐藤 督; FreeSWITCH Users Help CC: 堀田 忠司 件名: Re: [Freeswitch-users] H.323 Connection Hi Satoh, check if your H.323 endpoints are behind a firewall. Freeswitch doesn't support H.460 NAT traversal natively, so you might have to install a GnuGk in front of it to proxy the media data. Regards, Jan -- Jan Willamowius, Founder of the GNU Gatekeeper Project EMail : jan@willamowius.de Website: https://www.gnugk.org [https://www.gnugk.org/logo-200x200.png]<https://www.gnugk.org/> GNU Gatekeeper - a free VOIP Gatekeeper for H.323<https://www.gnugk.org/> www.gnugk.org The GNU Gatekeeper (GnuGk) is a H.323 gatekeeper, available freely under GPL license. It forms the basis for IP telephony (VOIP) or video conferencing systems. Support: https://www.willamowius.com/gnugk-support.html Relaxed Communications GmbH Frahmredder 91, 22393 Hamburg, Germany Geschäftsführer: Jan Willamowius HRB 125261 (Amtsgericht Hamburg) USt-IdNr: DE286003584 satoh.osamu@nttdata-sbc.co.jp wrote:
Hello,
I am trying to connect to FreeSWITCH by H.323 protcol. I built,installed and loaded the module of mod_h323. but it not work properly.
I installed it as follows. (OS, Version info) OS: CentOS Linux release 7.5.1804 (Core) FreeSWITCH: 1.6.2 PTlib: 2.10.9.2 h323plus: 1.27.0
Configure was reference to the following. https://freeswitch.org/confluence/display/FREESWITCH/mod_h323
It is in the following state.(When Call to SIP Extension) - It seems to connection is successfly(Connection established) on Client, but it can not hear any sound. - In Server of FreeSWITCH, the CPU load abnormally increases, and there is the case that service of Freeswith is stopped.
I looking for logs of past mailing lists, there are cases of success and failure. http://lists.freeswitch.org/pipermail/freeswitch-users/2016-September/122560... <http://lists.freeswitch.org/pipermail/freeswitch-users/2016-June/120918.html>http://lists.freeswitch.org/pipermail/freeswitch-users/2016-June/120896.html
Can you tell me what settings and installation procedures can be successfully connected?
Best Regards, Satoh
participants (2)
-
Jan Willamowius
-
satoh.osamu＠nttdata-sbc.co.jp