Hello Jan,
Thank you for your reply.
Now I using FreeSWITCH on internal network of company only.
Therefore, firewall and H.460 NAT have nothing todo with it.
I think that the cause of this problem is FreeSWTICH setting or version of library etc, maybe.
I tried other version of PTLib and h323plus,
(ptlib-2.8.2 + h323plus-20100525, ptlib-trunk + h323plus-trunk)
but this problem is not solve.
If you are able to connect of H.323,
it will be appreciated if you can share information on the environment, settings.
Best Regards,
Satoh
差出人: Jan Willamowius <jan@willamowius.de>
送信日時: 2018年11月7日 21:41
宛先: 佐藤 督; FreeSWITCH Users Help
CC: 堀田 忠司
件名: Re: [Freeswitch-users] H.323 Connection
送信日時: 2018年11月7日 21:41
宛先: 佐藤 督; FreeSWITCH Users Help
CC: 堀田 忠司
件名: Re: [Freeswitch-users] H.323 Connection
Hi Satoh,
check if your H.323 endpoints are behind a firewall. Freeswitch doesn't
support H.460 NAT traversal natively, so you might have to install a
GnuGk in front of it to proxy the media data.
Regards,
Jan
--
Jan Willamowius, Founder of the GNU Gatekeeper Project
EMail : jan@willamowius.de
Website: https://www.gnugk.org
Support: https://www.willamowius.com/gnugk-support.html
Relaxed Communications GmbH
Frahmredder 91, 22393 Hamburg, Germany
Geschäftsführer: Jan Willamowius
HRB 125261 (Amtsgericht Hamburg)
USt-IdNr: DE286003584
satoh.osamu@nttdata-sbc.co.jp wrote:
> Hello,
>
> I am trying to connect to FreeSWITCH by H.323 protcol.
> I built,installed and loaded the module of mod_h323. but it not work properly.
>
> I installed it as follows.
> (OS, Version info)
> OS: CentOS Linux release 7.5.1804 (Core)
> FreeSWITCH: 1.6.2
> PTlib: 2.10.9.2
> h323plus: 1.27.0
>
> Configure was reference to the following.
> https://freeswitch.org/confluence/display/FREESWITCH/mod_h323
>
>
> It is in the following state.(When Call to SIP Extension)
> - It seems to connection is successfly(Connection established) on Client, but it can not hear any sound.
> - In Server of FreeSWITCH, the CPU load abnormally increases, and there is the case that service of Freeswith is stopped.
>
>
> I looking for logs of past mailing lists, there are cases of success and failure.
> http://lists.freeswitch.org/pipermail/freeswitch-users/2016-September/122560.html
> <http://lists.freeswitch.org/pipermail/freeswitch-users/2016-June/120918.html>http://lists.freeswitch.org/pipermail/freeswitch-users/2016-June/120896.html
>
> Can you tell me what settings and installation procedures can be successfully connected?
>
>
> Best Regards,
> Satoh
>
check if your H.323 endpoints are behind a firewall. Freeswitch doesn't
support H.460 NAT traversal natively, so you might have to install a
GnuGk in front of it to proxy the media data.
Regards,
Jan
--
Jan Willamowius, Founder of the GNU Gatekeeper Project
EMail : jan@willamowius.de
Website: https://www.gnugk.org
 |
www.gnugk.org
The GNU Gatekeeper (GnuGk) is a H.323 gatekeeper, available freely under GPL license. It forms the basis for IP telephony (VOIP) or video conferencing systems.
|
|
Support: https://www.willamowius.com/gnugk-support.html
Relaxed Communications GmbH
Frahmredder 91, 22393 Hamburg, Germany
Geschäftsführer: Jan Willamowius
HRB 125261 (Amtsgericht Hamburg)
USt-IdNr: DE286003584
satoh.osamu@nttdata-sbc.co.jp wrote:
> Hello,
>
> I am trying to connect to FreeSWITCH by H.323 protcol.
> I built,installed and loaded the module of mod_h323. but it not work properly.
>
> I installed it as follows.
> (OS, Version info)
> OS: CentOS Linux release 7.5.1804 (Core)
> FreeSWITCH: 1.6.2
> PTlib: 2.10.9.2
> h323plus: 1.27.0
>
> Configure was reference to the following.
> https://freeswitch.org/confluence/display/FREESWITCH/mod_h323
>
>
> It is in the following state.(When Call to SIP Extension)
> - It seems to connection is successfly(Connection established) on Client, but it can not hear any sound.
> - In Server of FreeSWITCH, the CPU load abnormally increases, and there is the case that service of Freeswith is stopped.
>
>
> I looking for logs of past mailing lists, there are cases of success and failure.
> http://lists.freeswitch.org/pipermail/freeswitch-users/2016-September/122560.html
> <http://lists.freeswitch.org/pipermail/freeswitch-users/2016-June/120918.html>http://lists.freeswitch.org/pipermail/freeswitch-users/2016-June/120896.html
>
> Can you tell me what settings and installation procedures can be successfully connected?
>
>
> Best Regards,
> Satoh
>