I have a server with 4 ETH. Each one have a different IP In 2 cases i fixed the ip address, In the other 2 cases i have 2 cable connections in bridge mode so i receive the public ip in dhcp mode. eth0 local address 192.168.1.100 eth1 local address 192.168.2.100 eth2 public address dhcp (cable) eth3 public address dhcp (cable) I was thinking to build 4 different profiles for each eth port, but i came to know that if we change the place of colocation it will not work properly because the dhcp ip. It is any way to attach a profile to the eth port, not the ip? Or if you know a better way to manage this case. I would like to receive traffic from the 2 public ip's and route it both like if i have just one profile. Josue Diaz Cruz Departamento Tecnico y Soporte <mailto:jdiaz@coinfru.com> jdiaz@coinfru.com C/ Balsicas 3 Alquerias | 30580 | Murcia <http://www.coinfru.com/> www.coinfru.com