I have a server
with 4 ETH. Each one have a different IP
In 2 cases i
fixed the ip address, In the other 2 cases i have 2 cable connections in bridge
mode so i receive the public ip in dhcp mode.
eth0 local
address 192.168.1.100
eth1 local
address 192.168.2.100
eth2 public
address dhcp (cable)
eth3 public
address dhcp (cable)
I was thinking to
build 4 different profiles for each eth port, but i came to know that if we
change the place of colocation it will not work properly because the dhcp ip. It
is any way to attach a profile to the eth port, not the ip?
Or if you know a
better way to manage this case. I would like to receive traffic from the 2
public ip's and route it both like if i have just one
profile.