Steve Thanks for the reply netstat -anlp | grep 8021 is blank (nothing showing up) /opt/freeswitch/bin/fs_cli -d 7 -H 75.xxx.xxx.xxx -P 8021 [DEBUG] libs/esl/src/esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] libs/esl/src/esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] libs/esl/fs_cli.c:1159 main() profile default does not exist using builtin profile [DEBUG] libs/esl/fs_cli.c:1188 main() Using profile internal [75.xxx.xxx.xxx] [ERROR] libs/esl/fs_cli.c:1206 main() Error Connecting [Socket Connection Error] yes mod_event_socket is after mod_xml_curl but I changed the order in modules.conf.xml still getting above (restarted freeswitch) thx deniro-- On Mon, Feb 28, 2011 at 3:35 AM, Steven Ayre <steveayre@gmail.com> wrote:

Enable debug logging and you should see an error that'll tell you more.

Is mod_event_socket loading before or after mod_xml_curl? Chances are mod_xml_curl is loading first, so it's trying to read event_socket.conf.xml and/or acl.conf.xml through xml_curl and either getting a different config to your previous local copy or the ACLs are different.

What does "netstat -anlp | grep :8021" from the linux cli show you? Does it show that freeswitch is actually listening on the port? If it is it's probably an ACL problem, if it isn't then it's probably a problem with event_socket.conf.xml

-Steve

On 28 February 2011 00:53, deniro <ayhkor@gmail.com> wrote:

...

What would be possible reasons for this and how to resolve? running fs 106 on ubuntu 10.04 server

/opt/freeswitch/bin/fs_cli -H xxx.xxx.xxx.xxx -P 8021 [ERROR] libs/esl/fs_cli.c:1206 main() Error Connecting [Socket Connection Error] was working fine before I installed mod_xml_cdr configure --prefix=/opt/freeswitch --without-libcurl make mod_xml_cdr-install (no errors)

in modules.conf.xml <load module="mod_event_socket"/>

is there a packaged version of mod_xml_cdr (for fs 1.0.6)?

thx deniro-- _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

Checked the log Nothing is logged when fs_cli -d 7 -H 75.xxx.xxx.xxx -P 8021 is issued /opt/freeswitch/log# tail -f freeswitch.log ls -l freeswitch.log -rwxrwxrwx 1 freeswitch daemon 33018 2011-02-28 17:39 freeswitch.log thx On Mon, Feb 28, 2011 at 3:59 PM, Peter Olsson < peter.olsson@visionutveckling.se> wrote:

Check freeswitch.log, it probably reports some problem when loading the mod_event_socket module.

/Peter ________________________________________ Från: freeswitch-users-bounces@lists.freeswitch.org [ freeswitch-users-bounces@lists.freeswitch.org] för deniro [ ayhkor@gmail.com] Skickat: den 28 februari 2011 21:42 Till: FreeSWITCH Users Help Ämne: Re: [Freeswitch-users] fs_cli socket connection error

Steve Thanks for the reply netstat -anlp | grep 8021 is blank (nothing showing up)

/opt/freeswitch/bin/fs_cli -d 7 -H 75.xxx.xxx.xxx -P 8021 [DEBUG] libs/esl/src/esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] libs/esl/src/esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] libs/esl/fs_cli.c:1159 main() profile default does not exist using builtin profile [DEBUG] libs/esl/fs_cli.c:1188 main() Using profile internal [75.xxx.xxx.xxx] [ERROR] libs/esl/fs_cli.c:1206 main() Error Connecting [Socket Connection Error] yes mod_event_socket is after mod_xml_curl but I changed the order in modules.conf.xml still getting above (restarted freeswitch)

thx deniro--

On Mon, Feb 28, 2011 at 3:35 AM, Steven Ayre <steveayre@gmail.com<mailto: steveayre@gmail.com>> wrote: Enable debug logging and you should see an error that'll tell you more.

Is mod_event_socket loading before or after mod_xml_curl? Chances are mod_xml_curl is loading first, so it's trying to read event_socket.conf.xml and/or acl.conf.xml through xml_curl and either getting a different config to your previous local copy or the ACLs are different.

What does "netstat -anlp | grep :8021" from the linux cli show you? Does it show that freeswitch is actually listening on the port? If it is it's probably an ACL problem, if it isn't then it's probably a problem with event_socket.conf.xml

-Steve

On 28 February 2011 00:53, deniro <ayhkor@gmail.com<mailto: ayhkor@gmail.com>> wrote:

...

What would be possible reasons for this and how to resolve? running fs 106 on ubuntu 10.04 server

/opt/freeswitch/bin/fs_cli -H xxx.xxx.xxx.xxx -P 8021 [ERROR] libs/esl/fs_cli.c:1206 main() Error Connecting [Socket Connection Error] was working fine before I installed mod_xml_cdr configure --prefix=/opt/freeswitch --without-libcurl make mod_xml_cdr-install (no errors)

in modules.conf.xml <load module="mod_event_socket"/>

is there a packaged version of mod_xml_cdr (for fs 1.0.6)?

thx deniro-- _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto: FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org<http://www.freeswitch.org/>

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto: FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org<http://www.freeswitch.org/>

!DSPAM:4d6c0a1132761029518849!

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

I put the log in pastebin freeswitch.log only when starting freeswitch (after stop) http://pastebin.freeswitch.org/15502 thx deniro On Mon, Feb 28, 2011 at 5:46 PM, Steven Ayre <steveayre@gmail.com> wrote:

You must check the logfile for when FS starts up - if netstat shows nothing for port 8021 then either mod_event_socket isn't being loaded or you'll see an error when it tries to load.

Nothing from netstat means nothing's listening, so trying to connect using fs_cli won't do anything.

-Steve

On 28 February 2011 22:40, deniro <ayhkor@gmail.com> wrote:

...

Checked the log Nothing is logged when fs_cli -d 7 -H 75.xxx.xxx.xxx -P 8021 is issued /opt/freeswitch/log# tail -f freeswitch.log

ls -l freeswitch.log -rwxrwxrwx 1 freeswitch daemon 33018 2011-02-28 17:39 freeswitch.log thx

On Mon, Feb 28, 2011 at 3:59 PM, Peter Olsson <peter.olsson@visionutveckling.se> wrote:

...

Check freeswitch.log, it probably reports some problem when loading the mod_event_socket module.

/Peter ________________________________________ Från: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org] för deniro [ayhkor@gmail.com] Skickat: den 28 februari 2011 21:42 Till: FreeSWITCH Users Help Ämne: Re: [Freeswitch-users] fs_cli socket connection error

Steve Thanks for the reply netstat -anlp | grep 8021 is blank (nothing showing up)

/opt/freeswitch/bin/fs_cli -d 7 -H 75.xxx.xxx.xxx -P 8021 [DEBUG] libs/esl/src/esl_config.c:56 esl_config_open_file()

Configuration

...

file is /root/.fs_cli_conf. [DEBUG] libs/esl/src/esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] libs/esl/fs_cli.c:1159 main() profile default does not exist using builtin profile [DEBUG] libs/esl/fs_cli.c:1188 main() Using profile internal [75.xxx.xxx.xxx] [ERROR] libs/esl/fs_cli.c:1206 main() Error Connecting [Socket Connection Error] yes mod_event_socket is after mod_xml_curl but I changed the order in modules.conf.xml still getting above (restarted freeswitch)

thx deniro--

On Mon, Feb 28, 2011 at 3:35 AM, Steven Ayre <steveayre@gmail.com<mailto:steveayre@gmail.com>> wrote: Enable debug logging and you should see an error that'll tell you more.

Is mod_event_socket loading before or after mod_xml_curl? Chances are mod_xml_curl is loading first, so it's trying to read event_socket.conf.xml and/or acl.conf.xml through xml_curl and either getting a different config to your previous local copy or the ACLs are different.

What does "netstat -anlp | grep :8021" from the linux cli show you? Does it show that freeswitch is actually listening on the port? If it is it's probably an ACL problem, if it isn't then it's probably a problem with event_socket.conf.xml

-Steve

On 28 February 2011 00:53, deniro <ayhkor@gmail.com<mailto:ayhkor@gmail.com>> wrote:

...

What would be possible reasons for this and how to resolve? running fs 106 on ubuntu 10.04 server

/opt/freeswitch/bin/fs_cli -H xxx.xxx.xxx.xxx -P 8021 [ERROR] libs/esl/fs_cli.c:1206 main() Error Connecting [Socket Connection Error] was working fine before I installed mod_xml_cdr configure --prefix=/opt/freeswitch --without-libcurl make mod_xml_cdr-install (no errors)

in modules.conf.xml <load module="mod_event_socket"/>

is there a packaged version of mod_xml_cdr (for fs 1.0.6)?

thx deniro-- _______________________________________________ FreeSWITCH-users mailing list

FreeSWITCH-users@lists.freeswitch.org<mailto: FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org<http://www.freeswitch.org/>

_______________________________________________ FreeSWITCH-users mailing list

FreeSWITCH-users@lists.freeswitch.org<mailto: FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org<http://www.freeswitch.org/>

!DSPAM:4d6c0a1132761029518849!

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

Anthony Thanks for the quick response I appreciate the help but I am not getting this Again, It was working fine before I installed mod_xml_cdr configure --prefix=/opt/freeswitch --without-libcurl make mod_xml_cdr-install (no errors) I have the tar of /opt/freeswitch before installing mod_xml_cdr When I restore that tar eveything is working fine and netstat shows 8021 connections. I tested again. Just restored from tar backup and I am able to run fs_cli without any problem my firewall settings are the same before and after tar restore. /opt# tar -xvf freeswitch.tar.feb26 /etc/init.d/freeswitch start /opt# /opt/freeswitch/bin/fs_cli -H 75.xxx.xxx.xxx -P 8021 _____ ____ ____ _ ___ | ___/ ___| / ___| | |_ _| | |_ \___ \ | | | | | | | _| ___) | | |___| |___ | | |_| |____/ \____|_____|___| ******************************************************* * Anthony Minessale II, Ken Rice, Michael Jerris * * FreeSWITCH (http://www.freeswitch.org) * * Paypal Donations Appreciated: paypal@freeswitch.org * * Brought to you by ClueCon http://www.cluecon.com/ * ******************************************************* Type /help <enter> to see a list of commands +OK log level [7] freeswitch@75.xxx.xxx.xxx@internal> On Mon, Feb 28, 2011 at 6:21 PM, Anthony Minessale < anthony.minessale@gmail.com> wrote:

seems to me like you solved your own problem when you say you see no activity. It makes it pretty clear you have firewall or nat issue on your client or server.

On Mon, Feb 28, 2011 at 5:18 PM, deniro <ayhkor@gmail.com> wrote:

...

I put the log in pastebin freeswitch.log only when starting freeswitch (after stop)

http://pastebin.freeswitch.org/15502 thx deniro On Mon, Feb 28, 2011 at 5:46 PM, Steven Ayre <steveayre@gmail.com> wrote:

...

You must check the logfile for when FS starts up - if netstat shows nothing for port 8021 then either mod_event_socket isn't being loaded or you'll see an error when it tries to load.

Nothing from netstat means nothing's listening, so trying to connect using fs_cli won't do anything.

-Steve

On 28 February 2011 22:40, deniro <ayhkor@gmail.com> wrote:

...

Checked the log Nothing is logged when fs_cli -d 7 -H 75.xxx.xxx.xxx -P 8021 is issued /opt/freeswitch/log# tail -f freeswitch.log

ls -l freeswitch.log -rwxrwxrwx 1 freeswitch daemon 33018 2011-02-28 17:39 freeswitch.log thx

On Mon, Feb 28, 2011 at 3:59 PM, Peter Olsson <peter.olsson@visionutveckling.se> wrote:

...

Check freeswitch.log, it probably reports some problem when loading

the

...

...

...

mod_event_socket module.

/Peter ________________________________________ Från: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org] för deniro [ayhkor@gmail.com] Skickat: den 28 februari 2011 21:42 Till: FreeSWITCH Users Help Ämne: Re: [Freeswitch-users] fs_cli socket connection error

Steve Thanks for the reply netstat -anlp | grep 8021 is blank (nothing showing up)

/opt/freeswitch/bin/fs_cli -d 7 -H 75.xxx.xxx.xxx -P 8021 [DEBUG] libs/esl/src/esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] libs/esl/src/esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] libs/esl/fs_cli.c:1159 main() profile default does not exist using builtin profile [DEBUG] libs/esl/fs_cli.c:1188 main() Using profile internal [75.xxx.xxx.xxx] [ERROR] libs/esl/fs_cli.c:1206 main() Error Connecting [Socket Connection Error] yes mod_event_socket is after mod_xml_curl but I changed the order in modules.conf.xml still getting above (restarted freeswitch)

thx deniro--

On Mon, Feb 28, 2011 at 3:35 AM, Steven Ayre <steveayre@gmail.com<mailto:steveayre@gmail.com>> wrote: Enable debug logging and you should see an error that'll tell you more.

Is mod_event_socket loading before or after mod_xml_curl? Chances are mod_xml_curl is loading first, so it's trying to read event_socket.conf.xml and/or acl.conf.xml through xml_curl and either getting a different config to your previous local copy or the ACLs are different.

What does "netstat -anlp | grep :8021" from the linux cli show you? Does it show that freeswitch is actually listening on the port? If it is it's probably an ACL problem, if it isn't then it's probably a problem with event_socket.conf.xml

-Steve

On 28 February 2011 00:53, deniro <ayhkor@gmail.com<mailto:ayhkor@gmail.com>> wrote:

...

What would be possible reasons for this and how to resolve? running fs 106 on ubuntu 10.04 server

/opt/freeswitch/bin/fs_cli -H xxx.xxx.xxx.xxx -P 8021 [ERROR] libs/esl/fs_cli.c:1206 main() Error Connecting [Socket Connection Error] was working fine before I installed mod_xml_cdr configure --prefix=/opt/freeswitch --without-libcurl make mod_xml_cdr-install (no errors)

in modules.conf.xml <load module="mod_event_socket"/>

is there a packaged version of mod_xml_cdr (for fs 1.0.6)?

thx deniro-- _______________________________________________ FreeSWITCH-users mailing list

FreeSWITCH-users@lists.freeswitch.org<mailto: FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users

UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org<http://www.freeswitch.org/>

_______________________________________________ FreeSWITCH-users mailing list

FreeSWITCH-users@lists.freeswitch.org<mailto: FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users

UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org<http://www.freeswitch.org/>

!DSPAM:4d6c0a1132761029518849!

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users

UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

-- Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire

AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch

FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

Ok, you really need to pay attention to any log message that logs with the CRIT (critical) log level - they're really serious errors. You should look at adding the critical="true" attribute to all the tags in modules.conf.xml which you want to be sure are loaded. If a module fails to load without that tag FS will continue to run anyway, with that tag it'll refuse to start so you'll know instantly something is wrong. Most of your modules aren't loading, because they haven't been compiled correctly. Some look like they're missing (no such file or directory) and others haven't been built right (undefined symbols). Here are a few of the important lines from your log: 2011-02-28 18:12:21.910738 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_event_socket.so **/opt/freeswitch/mod/mod_event_socket.so: undefined symbol: switch_event_serialize_json** 2011-02-28 18:12:21.910789 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_xml_curl.so **/opt/freeswitch/mod/mod_xml_curl.so: cannot open shared object file: No such file or directory** 2011-02-28 18:12:21.910813 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_xml_cdr.so **/opt/freeswitch/mod/mod_xml_cdr.so: cannot open shared object file: No such file or directory** 2011-02-28 18:12:21.911581 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_commands.so **/opt/freeswitch/mod/mod_commands.so: undefined symbol: switch_xml_reload** 2011-02-28 18:12:21.911709 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_conference.so **/opt/freeswitch/mod/mod_conference.so: undefined symbol: switch_channel_test_app_flag_key** 2011-02-28 18:12:21.911842 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_dptools.so **/opt/freeswitch/mod/mod_dptools.so: undefined symbol: switch_event_merge** 2011-02-28 18:12:21.912264 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_dialplan_xml.so **/opt/freeswitch/mod/mod_dialplan_xml.so: undefined symbol: switch_xml_std_datetime_check** 2011-02-28 18:12:21.912531 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_g723_1.so **/opt/freeswitch/mod/mod_g723_1.so: cannot open shared object file: No such file or directory** 2011-02-28 18:12:21.912573 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_g729.so **/opt/freeswitch/mod/mod_g729.so: cannot open shared object file: No such file or directory** 2011-02-28 18:12:21.912609 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_amr.so **/opt/freeswitch/mod/mod_amr.so: cannot open shared object file: No such file or directory** Important things to note: mod_event_socket hasn't loaded because of a undefined symbol, it wasn't built correctly mod_xml_curl hasn't loaded because it doesn't exist, it was either never built or never installed Something pretty strange has happened. Did you recompile when trying to add mod_xml_curl? I'd suggest you delete all the FS files, including the Git clone, make a fresh checkout and build it from scratch. -Steve On 28 February 2011 23:18, deniro <ayhkor@gmail.com> wrote:

I put the log in pastebin freeswitch.log only when starting freeswitch (after stop)

http://pastebin.freeswitch.org/15502 thx deniro On Mon, Feb 28, 2011 at 5:46 PM, Steven Ayre <steveayre@gmail.com> wrote:

...

You must check the logfile for when FS starts up - if netstat shows nothing for port 8021 then either mod_event_socket isn't being loaded or you'll see an error when it tries to load.

Nothing from netstat means nothing's listening, so trying to connect using fs_cli won't do anything.

-Steve

On 28 February 2011 22:40, deniro <ayhkor@gmail.com> wrote:

...

Checked the log Nothing is logged when fs_cli -d 7 -H 75.xxx.xxx.xxx -P 8021 is issued /opt/freeswitch/log# tail -f freeswitch.log

ls -l freeswitch.log -rwxrwxrwx 1 freeswitch daemon 33018 2011-02-28 17:39 freeswitch.log thx

On Mon, Feb 28, 2011 at 3:59 PM, Peter Olsson <peter.olsson@visionutveckling.se> wrote:

...

Check freeswitch.log, it probably reports some problem when loading the mod_event_socket module.

/Peter ________________________________________ Från: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org] för deniro [ayhkor@gmail.com] Skickat: den 28 februari 2011 21:42 Till: FreeSWITCH Users Help Ämne: Re: [Freeswitch-users] fs_cli socket connection error

Steve Thanks for the reply netstat -anlp | grep 8021  is blank (nothing showing up)

/opt/freeswitch/bin/fs_cli -d 7 -H 75.xxx.xxx.xxx -P 8021 [DEBUG] libs/esl/src/esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] libs/esl/src/esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] libs/esl/fs_cli.c:1159 main() profile default does not exist using builtin profile [DEBUG] libs/esl/fs_cli.c:1188 main() Using profile internal [75.xxx.xxx.xxx] [ERROR] libs/esl/fs_cli.c:1206 main() Error Connecting [Socket Connection Error] yes mod_event_socket is after  mod_xml_curl but I changed the order in  modules.conf.xml still getting above (restarted freeswitch)

thx deniro--

On Mon, Feb 28, 2011 at 3:35 AM, Steven Ayre <steveayre@gmail.com<mailto:steveayre@gmail.com>> wrote: Enable debug logging and you should see an error that'll tell you more.

Is mod_event_socket loading before or after mod_xml_curl? Chances are mod_xml_curl is loading first, so it's trying to read event_socket.conf.xml and/or acl.conf.xml through xml_curl and either getting a different config to your previous local copy or the ACLs are different.

What does "netstat -anlp | grep :8021" from the linux cli show you? Does it show that freeswitch is actually listening on the port? If it is it's probably an ACL problem, if it isn't then it's probably a problem with event_socket.conf.xml

-Steve

On 28 February 2011 00:53, deniro <ayhkor@gmail.com<mailto:ayhkor@gmail.com>> wrote:

...

What would be possible reasons for this and how to resolve? running fs 106 on ubuntu 10.04 server

/opt/freeswitch/bin/fs_cli -H xxx.xxx.xxx.xxx -P 8021 [ERROR] libs/esl/fs_cli.c:1206 main() Error Connecting [Socket Connection Error] was working fine before I installed  mod_xml_cdr configure --prefix=/opt/freeswitch --without-libcurl make mod_xml_cdr-install (no errors)

in modules.conf.xml <load module="mod_event_socket"/>

is there a packaged version of mod_xml_cdr (for fs 1.0.6)?

thx deniro-- _______________________________________________ FreeSWITCH-users mailing list

FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users

UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org<http://www.freeswitch.org/>

_______________________________________________ FreeSWITCH-users mailing list

FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users

UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org<http://www.freeswitch.org/>

!DSPAM:4d6c0a1132761029518849!

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users

UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

like I said you re-installed with a new version of libcurl but did not fully rebuild. So most of the modules that depend on curl were broken torn between the old and new version it was linked to.. had you executed the 4 commands I posted yesterday it would be fine. On Tue, Mar 1, 2011 at 11:02 AM, deniro <ayhkor@gmail.com> wrote:

Thank you all for advice  and direction Will re-install from scratch at a later time. deniro--

On Tue, Mar 1, 2011 at 4:16 AM, Steven Ayre <steveayre@gmail.com> wrote:

...

Ok, you really need to pay attention to any log message that logs with the CRIT (critical) log level - they're really serious errors. You should look at adding the critical="true" attribute to all the tags in modules.conf.xml which you want to be sure are loaded. If a module fails to load without that tag FS will continue to run anyway, with that tag it'll refuse to start so you'll know instantly something is wrong.

Most of your modules aren't loading, because they haven't been compiled correctly. Some look like they're missing (no such file or directory) and others haven't been built right (undefined symbols).

Here are a few of the important lines from your log:

2011-02-28 18:12:21.910738 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_event_socket.so **/opt/freeswitch/mod/mod_event_socket.so: undefined symbol: switch_event_serialize_json** 2011-02-28 18:12:21.910789 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_xml_curl.so **/opt/freeswitch/mod/mod_xml_curl.so: cannot open shared object file: No such file or directory** 2011-02-28 18:12:21.910813 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_xml_cdr.so **/opt/freeswitch/mod/mod_xml_cdr.so: cannot open shared object file: No such file or directory** 2011-02-28 18:12:21.911581 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_commands.so **/opt/freeswitch/mod/mod_commands.so: undefined symbol: switch_xml_reload** 2011-02-28 18:12:21.911709 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_conference.so **/opt/freeswitch/mod/mod_conference.so: undefined symbol: switch_channel_test_app_flag_key** 2011-02-28 18:12:21.911842 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_dptools.so **/opt/freeswitch/mod/mod_dptools.so: undefined symbol: switch_event_merge** 2011-02-28 18:12:21.912264 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_dialplan_xml.so **/opt/freeswitch/mod/mod_dialplan_xml.so: undefined symbol: switch_xml_std_datetime_check** 2011-02-28 18:12:21.912531 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_g723_1.so **/opt/freeswitch/mod/mod_g723_1.so: cannot open shared object file: No such file or directory** 2011-02-28 18:12:21.912573 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_g729.so **/opt/freeswitch/mod/mod_g729.so: cannot open shared object file: No such file or directory** 2011-02-28 18:12:21.912609 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_amr.so **/opt/freeswitch/mod/mod_amr.so: cannot open shared object file: No such file or directory**

Important things to note: mod_event_socket hasn't loaded because of a undefined symbol, it wasn't built correctly mod_xml_curl hasn't loaded because it doesn't exist, it was either never built or never installed

Something pretty strange has happened. Did you recompile when trying to add mod_xml_curl?

I'd suggest you delete all the FS files, including the Git clone, make a fresh checkout and build it from scratch.

-Steve

On 28 February 2011 23:18, deniro <ayhkor@gmail.com> wrote:

...

I put the log in pastebin freeswitch.log only when starting freeswitch (after stop)

http://pastebin.freeswitch.org/15502 thx deniro On Mon, Feb 28, 2011 at 5:46 PM, Steven Ayre <steveayre@gmail.com> wrote:

...

You must check the logfile for when FS starts up - if netstat shows nothing for port 8021 then either mod_event_socket isn't being loaded or you'll see an error when it tries to load.

Nothing from netstat means nothing's listening, so trying to connect using fs_cli won't do anything.

-Steve

On 28 February 2011 22:40, deniro <ayhkor@gmail.com> wrote:

...

Checked the log Nothing is logged when fs_cli -d 7 -H 75.xxx.xxx.xxx -P 8021 is issued /opt/freeswitch/log# tail -f freeswitch.log

ls -l freeswitch.log -rwxrwxrwx 1 freeswitch daemon 33018 2011-02-28 17:39 freeswitch.log thx

On Mon, Feb 28, 2011 at 3:59 PM, Peter Olsson <peter.olsson@visionutveckling.se> wrote:

...

Check freeswitch.log, it probably reports some problem when loading the mod_event_socket module.

/Peter ________________________________________ Från: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org] för deniro [ayhkor@gmail.com] Skickat: den 28 februari 2011 21:42 Till: FreeSWITCH Users Help Ämne: Re: [Freeswitch-users] fs_cli socket connection error

Steve Thanks for the reply netstat -anlp | grep 8021  is blank (nothing showing up)

/opt/freeswitch/bin/fs_cli -d 7 -H 75.xxx.xxx.xxx -P 8021 [DEBUG] libs/esl/src/esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] libs/esl/src/esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] libs/esl/fs_cli.c:1159 main() profile default does not exist using builtin profile [DEBUG] libs/esl/fs_cli.c:1188 main() Using profile internal [75.xxx.xxx.xxx] [ERROR] libs/esl/fs_cli.c:1206 main() Error Connecting [Socket Connection Error] yes mod_event_socket is after  mod_xml_curl but I changed the order in  modules.conf.xml still getting above (restarted freeswitch)

thx deniro--

On Mon, Feb 28, 2011 at 3:35 AM, Steven Ayre <steveayre@gmail.com<mailto:steveayre@gmail.com>> wrote: Enable debug logging and you should see an error that'll tell you more.

Is mod_event_socket loading before or after mod_xml_curl? Chances are mod_xml_curl is loading first, so it's trying to read event_socket.conf.xml and/or acl.conf.xml through xml_curl and either getting a different config to your previous local copy or the ACLs are different.

What does "netstat -anlp | grep :8021" from the linux cli show you? Does it show that freeswitch is actually listening on the port? If it is it's probably an ACL problem, if it isn't then it's probably a problem with event_socket.conf.xml

-Steve

On 28 February 2011 00:53, deniro <ayhkor@gmail.com<mailto:ayhkor@gmail.com>> wrote: > What would be possible reasons for this and how to resolve? > running fs 106 on ubuntu 10.04 server > > /opt/freeswitch/bin/fs_cli -H xxx.xxx.xxx.xxx -P 8021 > [ERROR] libs/esl/fs_cli.c:1206 main() Error Connecting [Socket > Connection > Error] > was working fine before I installed  mod_xml_cdr > configure --prefix=/opt/freeswitch --without-libcurl > make mod_xml_cdr-install > (no errors) > > in modules.conf.xml > <load module="mod_event_socket"/> > > is there a packaged version of mod_xml_cdr (for fs 1.0.6)? > > thx > deniro-- > _______________________________________________ > FreeSWITCH-users mailing list > > > > FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > > > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org<http://www.freeswitch.org/> > >

_______________________________________________ FreeSWITCH-users mailing list

FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users

UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org<http://www.freeswitch.org/>

!DSPAM:4d6c0a1132761029518849!

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users

UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users

UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users

UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900

You need to create its config file. It won't load without it. "find . -name xml_cdr.conf" Actually it's xml_cdr.conf.xml, all config files will show .conf as their logical name but on the hard drive they're stored in .conf.xml. It should be in conf/autoload_configs -Steve On 2 March 2011 22:25, deniro <ayhkor@gmail.com> wrote:

I typed the 4 commands but still unable to load mod_xml_cdr and mod_xml_curl

2011-03-02 17:21:32.139672 [ERR] mod_xml_cdr.c:479 Open of xml_cdr.conf failed /opt# find . -name xml_cdr.conf nothing appears

here is errors from fs_cli -d 7

freeswitch@75.xxx.xxx.xx@internal> load mod_xml_cdr [DEBUG] libs/esl/src/esl.c:1063 esl_send() SEND api load mod_xml_cdr console_execute: true [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Content-Type] = [api/response] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Content-Length] = [50] -ERR [module load file routine returned an error] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Content-Type] = [log/data] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Content-Length] = [79] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-Level] = [3] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Text-Channel] = [0] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-File] = [mod_xml_cdr.c] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-Func] = [mod_xml_cdr_load] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-Line] = [479] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [User-Data] = [] [DEBUG] libs/esl/src/esl.c:1037 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: log/data Content-Length: 79 Log-Level: 3 Text-Channel: 0 Log-File: mod_xml_cdr.c Log-Func: mod_xml_cdr_load Log-Line: 479 User-Data: _undef_ 2011-03-02 17:21:32.139672 [ERR] mod_xml_cdr.c:479 Open of xml_cdr.conf failed [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Content-Type] = [log/data] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Content-Length] = [161] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-Level] = [2] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Text-Channel] = [0] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-File] = [switch_loadable_module.c] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-Func] = [switch_loadable_module_load_file] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-Line] = [882] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [User-Data] = [] [DEBUG] libs/esl/src/esl.c:1037 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: log/data Content-Length: 161 Log-Level: 2 Text-Channel: 0 Log-File: switch_loadable_module.c Log-Func: switch_loadable_module_load_file Log-Line: 882 User-Data: _undef_ 2011-03-02 17:21:32.139672 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_xml_cdr.so **Module load routine returned an error**

On Tue, Mar 1, 2011 at 1:11 PM, Anthony Minessale <anthony.minessale@gmail.com> wrote:

...

like I said you re-installed with a new version of libcurl but did not fully rebuild. So most of the modules that depend on curl were broken torn between the old and new version it was linked to..

had you executed the 4 commands I posted yesterday it would be fine.

On Tue, Mar 1, 2011 at 11:02 AM, deniro <ayhkor@gmail.com> wrote:

...

Thank you all for advice  and direction Will re-install from scratch at a later time. deniro--

On Tue, Mar 1, 2011 at 4:16 AM, Steven Ayre <steveayre@gmail.com> wrote:

...

Ok, you really need to pay attention to any log message that logs with the CRIT (critical) log level - they're really serious errors. You should look at adding the critical="true" attribute to all the tags in modules.conf.xml which you want to be sure are loaded. If a module fails to load without that tag FS will continue to run anyway, with that tag it'll refuse to start so you'll know instantly something is wrong.

Most of your modules aren't loading, because they haven't been compiled correctly. Some look like they're missing (no such file or directory) and others haven't been built right (undefined symbols).

Here are a few of the important lines from your log:

2011-02-28 18:12:21.910738 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_event_socket.so **/opt/freeswitch/mod/mod_event_socket.so: undefined symbol: switch_event_serialize_json** 2011-02-28 18:12:21.910789 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_xml_curl.so **/opt/freeswitch/mod/mod_xml_curl.so: cannot open shared object file: No such file or directory** 2011-02-28 18:12:21.910813 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_xml_cdr.so **/opt/freeswitch/mod/mod_xml_cdr.so: cannot open shared object file: No such file or directory** 2011-02-28 18:12:21.911581 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_commands.so **/opt/freeswitch/mod/mod_commands.so: undefined symbol: switch_xml_reload** 2011-02-28 18:12:21.911709 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_conference.so **/opt/freeswitch/mod/mod_conference.so: undefined symbol: switch_channel_test_app_flag_key** 2011-02-28 18:12:21.911842 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_dptools.so **/opt/freeswitch/mod/mod_dptools.so: undefined symbol: switch_event_merge** 2011-02-28 18:12:21.912264 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_dialplan_xml.so **/opt/freeswitch/mod/mod_dialplan_xml.so: undefined symbol: switch_xml_std_datetime_check** 2011-02-28 18:12:21.912531 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_g723_1.so **/opt/freeswitch/mod/mod_g723_1.so: cannot open shared object file: No such file or directory** 2011-02-28 18:12:21.912573 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_g729.so **/opt/freeswitch/mod/mod_g729.so: cannot open shared object file: No such file or directory** 2011-02-28 18:12:21.912609 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_amr.so **/opt/freeswitch/mod/mod_amr.so: cannot open shared object file: No such file or directory**

Important things to note: mod_event_socket hasn't loaded because of a undefined symbol, it wasn't built correctly mod_xml_curl hasn't loaded because it doesn't exist, it was either never built or never installed

Something pretty strange has happened. Did you recompile when trying to add mod_xml_curl?

I'd suggest you delete all the FS files, including the Git clone, make a fresh checkout and build it from scratch.

-Steve

On 28 February 2011 23:18, deniro <ayhkor@gmail.com> wrote:

...

I put the log in pastebin freeswitch.log only when starting freeswitch (after stop)

http://pastebin.freeswitch.org/15502 thx deniro On Mon, Feb 28, 2011 at 5:46 PM, Steven Ayre <steveayre@gmail.com> wrote:

...

You must check the logfile for when FS starts up - if netstat shows nothing for port 8021 then either mod_event_socket isn't being loaded or you'll see an error when it tries to load.

Nothing from netstat means nothing's listening, so trying to connect using fs_cli won't do anything.

-Steve

On 28 February 2011 22:40, deniro <ayhkor@gmail.com> wrote: > Checked the log > Nothing is logged when > fs_cli -d 7 -H 75.xxx.xxx.xxx -P 8021 > is issued > /opt/freeswitch/log# tail -f freeswitch.log > > ls -l freeswitch.log > -rwxrwxrwx 1 freeswitch daemon 33018 2011-02-28 17:39 > freeswitch.log > thx > > > > On Mon, Feb 28, 2011 at 3:59 PM, Peter Olsson > <peter.olsson@visionutveckling.se> wrote: >> >> Check freeswitch.log, it probably reports some problem when >> loading >> the >> mod_event_socket module. >> >> /Peter >> ________________________________________ >> Från: freeswitch-users-bounces@lists.freeswitch.org >> [freeswitch-users-bounces@lists.freeswitch.org] för deniro >> [ayhkor@gmail.com] >> Skickat: den 28 februari 2011 21:42 >> Till: FreeSWITCH Users Help >> Ämne: Re: [Freeswitch-users] fs_cli socket connection error >> >> Steve >> Thanks for the reply >> netstat -anlp | grep 8021  is blank (nothing showing up) >> >> /opt/freeswitch/bin/fs_cli -d 7 -H 75.xxx.xxx.xxx -P 8021 >> [DEBUG] libs/esl/src/esl_config.c:56 esl_config_open_file() >> Configuration >> file is /root/.fs_cli_conf. >> [DEBUG] libs/esl/src/esl_config.c:56 esl_config_open_file() >> Configuration >> file is /etc/fs_cli.conf. >> [DEBUG] libs/esl/fs_cli.c:1159 main() profile default does not >> exist >> using >> builtin profile >> [DEBUG] libs/esl/fs_cli.c:1188 main() Using profile internal >> [75.xxx.xxx.xxx] >> [ERROR] libs/esl/fs_cli.c:1206 main() Error Connecting [Socket >> Connection >> Error] >> yes mod_event_socket is after  mod_xml_curl but I changed the >> order >> in >>  modules.conf.xml >> still getting above (restarted freeswitch) >> >> thx >> deniro-- >> >> >> >> On Mon, Feb 28, 2011 at 3:35 AM, Steven Ayre >> <steveayre@gmail.com<mailto:steveayre@gmail.com>> wrote: >> Enable debug logging and you should see an error that'll tell you >> more. >> >> Is mod_event_socket loading before or after mod_xml_curl? Chances >> are >> mod_xml_curl is loading first, so it's trying to read >> event_socket.conf.xml and/or acl.conf.xml through xml_curl and >> either >> getting a different config to your previous local copy or the >> ACLs >> are >> different. >> >> What does "netstat -anlp | grep :8021" from the linux cli show >> you? >> Does it show that freeswitch is actually listening on the port? >> If >> it >> is it's probably an ACL problem, if it isn't then it's probably a >> problem with event_socket.conf.xml >> >> -Steve >> >> On 28 February 2011 00:53, deniro >> <ayhkor@gmail.com<mailto:ayhkor@gmail.com>> wrote: >> > What would be possible reasons for this and how to resolve? >> > running fs 106 on ubuntu 10.04 server >> > >> > /opt/freeswitch/bin/fs_cli -H xxx.xxx.xxx.xxx -P 8021 >> > [ERROR] libs/esl/fs_cli.c:1206 main() Error Connecting [Socket >> > Connection >> > Error] >> > was working fine before I installed  mod_xml_cdr >> > configure --prefix=/opt/freeswitch --without-libcurl >> > make mod_xml_cdr-install >> > (no errors) >> > >> > in modules.conf.xml >> > <load module="mod_event_socket"/> >> > >> > is there a packaged version of mod_xml_cdr (for fs 1.0.6)? >> > >> > thx >> > deniro-- >> > _______________________________________________ >> > FreeSWITCH-users mailing list >> > >> > >> > >> > >> > FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> >> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> > >> > >> > >> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> > http://www.freeswitch.org<http://www.freeswitch.org/> >> > >> > >> >> _______________________________________________ >> FreeSWITCH-users mailing list >> >> >> >> >> FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> >> >> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org<http://www.freeswitch.org/> >> >> !DSPAM:4d6c0a1132761029518849! >> >> _______________________________________________ >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> >> >> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org > > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > > > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > >

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users

UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users

UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users

UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

-- Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire

AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch

FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

freeswitch@xxx@internal> load mod_xml_curl -ERR [module load file routine returned an error] There's still an error while loading. You need to look at the logs for freeswitch, not the fs_cli ones. Either run 'fs_cli -l debug' or do '/log 7' within fs_cli -Steve On 3 March 2011 00:28, deniro <ayhkor@gmail.com> wrote:

ok, I see one under src. I copied that to conf/autoload_configs and looks like I am able to load mod_xml_cdr this way freeswitch@xxxx@internal> load mod_xml_cdr module_exists mod_xml_cdr true same method did not work for mod_xml_curl below is error message after I copied file cp /usr/src/freeswitch-1.0.6/conf/autoload_configs/xml_curl.conf.xml /opt/freeswitch/conf/autoload_configs/xml_curl.conf.xml

freeswitch@xxx@internal> load mod_xml_curl [DEBUG] libs/esl/src/esl.c:1140 esl_send() SEND api load mod_xml_curl console_execute: true [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Content-Type] = [api/response] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Content-Length] = [68] +OK Reloading XML -ERR [module load file routine returned an error] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Content-Type] = [log/data] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Content-Length] = [63] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Level] = [6] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Text-Channel] = [0] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-File] = [mod_enum.c] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Func] = [event_handler] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Line] = [808] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [User-Data] = [] [DEBUG] libs/esl/src/esl.c:1114 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: log/data Content-Length: 63 Log-Level: 6 Text-Channel: 0 Log-File: mod_enum.c Log-Func: event_handler Log-Line: 808 User-Data: _undef_ 2011-03-02 19:23:34.416231 [INFO] mod_enum.c:808 ENUM Reloaded 2011-03-02 19:23:34.416231 [INFO] mod_enum.c:808 ENUM Reloaded [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Content-Type] = [log/data] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Content-Length] = [72] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Level] = [3] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Text-Channel] = [0] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-File] = [mod_xml_curl.c] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Func] = [do_config] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Line] = [444] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [User-Data] = [] [DEBUG] libs/esl/src/esl.c:1114 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: log/data Content-Length: 72 Log-Level: 3 Text-Channel: 0 Log-File: mod_xml_curl.c Log-Func: do_config Log-Line: 444 User-Data: _undef_ 2011-03-02 19:23:34.416231 [ERR] mod_xml_curl.c:444 Binding has no url! 2011-03-02 19:23:34.416231 [ERR] mod_xml_curl.c:444 Binding has no url! [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Content-Type] = [log/data] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Content-Length] = [162] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Level] = [2] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Text-Channel] = [0] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-File] = [switch_loadable_module.c] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Func] = [switch_loadable_module_load_file] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Line] = [926] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [User-Data] = [] [DEBUG] libs/esl/src/esl.c:1114 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: log/data Content-Length: 162 Log-Level: 2 Text-Channel: 0 Log-File: switch_loadable_module.c Log-Func: switch_loadable_module_load_file Log-Line: 926 User-Data: _undef_ 2011-03-02 19:23:34.416231 [CRIT] switch_loadable_module.c:926 Error Loading module /opt/freeswitch/mod/mod_xml_curl.so **Module load routine returned an error** 2011-03-02 19:23:34.416231 [CRIT] switch_loadable_module.c:926 Error Loading module /opt/freeswitch/mod/mod_xml_curl.so **Module load routine returned an error** [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Content-Type] = [log/data] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Content-Length] = [86] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Level] = [6] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Text-Channel] = [0] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-File] = [switch_time.c] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Func] = [switch_load_timezones] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Line] = [950] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [User-Data] = [] [DEBUG] libs/esl/src/esl.c:1114 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: log/data Content-Length: 86 Log-Level: 6 Text-Channel: 0 Log-File: switch_time.c Log-Func: switch_load_timezones Log-Line: 950 User-Data: _undef_ 2011-03-02 19:23:34.417121 [INFO] switch_time.c:950 Timezone reloaded 530 definitions 2011-03-02 19:23:34.417121 [INFO] switch_time.c:950 Timezone reloaded 530 definitions

On Wed, Mar 2, 2011 at 6:25 PM, Steven Ayre <steveayre@gmail.com> wrote:

...

You need to create its config file. It won't load without it.

"find . -name xml_cdr.conf"

Actually it's xml_cdr.conf.xml, all config files will show .conf as their logical name but on the hard drive they're stored in .conf.xml. It should be in conf/autoload_configs

-Steve

On 2 March 2011 22:25, deniro <ayhkor@gmail.com> wrote:

...

I typed the 4 commands but still unable to load mod_xml_cdr and mod_xml_curl

2011-03-02 17:21:32.139672 [ERR] mod_xml_cdr.c:479 Open of xml_cdr.conf failed /opt# find . -name xml_cdr.conf nothing appears

here is errors from fs_cli -d 7

freeswitch@75.xxx.xxx.xx@internal> load mod_xml_cdr [DEBUG] libs/esl/src/esl.c:1063 esl_send() SEND api load mod_xml_cdr console_execute: true [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Content-Type] = [api/response] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Content-Length] = [50] -ERR [module load file routine returned an error] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Content-Type] = [log/data] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Content-Length] = [79] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-Level] = [3] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Text-Channel] = [0] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-File] = [mod_xml_cdr.c] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-Func] = [mod_xml_cdr_load] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-Line] = [479] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [User-Data] = [] [DEBUG] libs/esl/src/esl.c:1037 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: log/data Content-Length: 79 Log-Level: 3 Text-Channel: 0 Log-File: mod_xml_cdr.c Log-Func: mod_xml_cdr_load Log-Line: 479 User-Data: _undef_ 2011-03-02 17:21:32.139672 [ERR] mod_xml_cdr.c:479 Open of xml_cdr.conf failed [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Content-Type] = [log/data] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Content-Length] = [161] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-Level] = [2] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Text-Channel] = [0] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-File] = [switch_loadable_module.c] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-Func] = [switch_loadable_module_load_file] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-Line] = [882] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [User-Data] = [] [DEBUG] libs/esl/src/esl.c:1037 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: log/data Content-Length: 161 Log-Level: 2 Text-Channel: 0 Log-File: switch_loadable_module.c Log-Func: switch_loadable_module_load_file Log-Line: 882 User-Data: _undef_ 2011-03-02 17:21:32.139672 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_xml_cdr.so **Module load routine returned an error**

On Tue, Mar 1, 2011 at 1:11 PM, Anthony Minessale <anthony.minessale@gmail.com> wrote:

...

like I said you re-installed with a new version of libcurl but did not fully rebuild. So most of the modules that depend on curl were broken torn between the old and new version it was linked to..

had you executed the 4 commands I posted yesterday it would be fine.

On Tue, Mar 1, 2011 at 11:02 AM, deniro <ayhkor@gmail.com> wrote:

...

Thank you all for advice  and direction Will re-install from scratch at a later time. deniro--

On Tue, Mar 1, 2011 at 4:16 AM, Steven Ayre <steveayre@gmail.com> wrote:

...

Ok, you really need to pay attention to any log message that logs with the CRIT (critical) log level - they're really serious errors. You should look at adding the critical="true" attribute to all the tags in modules.conf.xml which you want to be sure are loaded. If a module fails to load without that tag FS will continue to run anyway, with that tag it'll refuse to start so you'll know instantly something is wrong.

Most of your modules aren't loading, because they haven't been compiled correctly. Some look like they're missing (no such file or directory) and others haven't been built right (undefined symbols).

Here are a few of the important lines from your log:

2011-02-28 18:12:21.910738 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_event_socket.so **/opt/freeswitch/mod/mod_event_socket.so: undefined symbol: switch_event_serialize_json** 2011-02-28 18:12:21.910789 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_xml_curl.so **/opt/freeswitch/mod/mod_xml_curl.so: cannot open shared object file: No such file or directory** 2011-02-28 18:12:21.910813 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_xml_cdr.so **/opt/freeswitch/mod/mod_xml_cdr.so: cannot open shared object file: No such file or directory** 2011-02-28 18:12:21.911581 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_commands.so **/opt/freeswitch/mod/mod_commands.so: undefined symbol: switch_xml_reload** 2011-02-28 18:12:21.911709 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_conference.so **/opt/freeswitch/mod/mod_conference.so: undefined symbol: switch_channel_test_app_flag_key** 2011-02-28 18:12:21.911842 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_dptools.so **/opt/freeswitch/mod/mod_dptools.so: undefined symbol: switch_event_merge** 2011-02-28 18:12:21.912264 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_dialplan_xml.so **/opt/freeswitch/mod/mod_dialplan_xml.so: undefined symbol: switch_xml_std_datetime_check** 2011-02-28 18:12:21.912531 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_g723_1.so **/opt/freeswitch/mod/mod_g723_1.so: cannot open shared object file: No such file or directory** 2011-02-28 18:12:21.912573 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_g729.so **/opt/freeswitch/mod/mod_g729.so: cannot open shared object file: No such file or directory** 2011-02-28 18:12:21.912609 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_amr.so **/opt/freeswitch/mod/mod_amr.so: cannot open shared object file: No such file or directory**

Important things to note: mod_event_socket hasn't loaded because of a undefined symbol, it wasn't built correctly mod_xml_curl hasn't loaded because it doesn't exist, it was either never built or never installed

Something pretty strange has happened. Did you recompile when trying to add mod_xml_curl?

I'd suggest you delete all the FS files, including the Git clone, make a fresh checkout and build it from scratch.

-Steve

On 28 February 2011 23:18, deniro <ayhkor@gmail.com> wrote: > I put the log in pastebin > freeswitch.log only when starting freeswitch (after stop) > > http://pastebin.freeswitch.org/15502 > thx > deniro > On Mon, Feb 28, 2011 at 5:46 PM, Steven Ayre <steveayre@gmail.com> > wrote: >> >> You must check the logfile for when FS starts up - if netstat >> shows >> nothing for port 8021 then either mod_event_socket isn't being >> loaded >> or you'll see an error when it tries to load. >> >> Nothing from netstat means nothing's listening, so trying to >> connect >> using fs_cli won't do anything. >> >> -Steve >> >> >> On 28 February 2011 22:40, deniro <ayhkor@gmail.com> wrote: >> > Checked the log >> > Nothing is logged when >> > fs_cli -d 7 -H 75.xxx.xxx.xxx -P 8021 >> > is issued >> > /opt/freeswitch/log# tail -f freeswitch.log >> > >> > ls -l freeswitch.log >> > -rwxrwxrwx 1 freeswitch daemon 33018 2011-02-28 17:39 >> > freeswitch.log >> > thx >> > >> > >> > >> > On Mon, Feb 28, 2011 at 3:59 PM, Peter Olsson >> > <peter.olsson@visionutveckling.se> wrote: >> >> >> >> Check freeswitch.log, it probably reports some problem when >> >> loading >> >> the >> >> mod_event_socket module. >> >> >> >> /Peter >> >> ________________________________________ >> >> Från: freeswitch-users-bounces@lists.freeswitch.org >> >> [freeswitch-users-bounces@lists.freeswitch.org] för >> >> deniro >> >> [ayhkor@gmail.com] >> >> Skickat: den 28 februari 2011 21:42 >> >> Till: FreeSWITCH Users Help >> >> Ämne: Re: [Freeswitch-users] fs_cli socket connection error >> >> >> >> Steve >> >> Thanks for the reply >> >> netstat -anlp | grep 8021  is blank (nothing showing up) >> >> >> >> /opt/freeswitch/bin/fs_cli -d 7 -H 75.xxx.xxx.xxx -P 8021 >> >> [DEBUG] libs/esl/src/esl_config.c:56 esl_config_open_file() >> >> Configuration >> >> file is /root/.fs_cli_conf. >> >> [DEBUG] libs/esl/src/esl_config.c:56 esl_config_open_file() >> >> Configuration >> >> file is /etc/fs_cli.conf. >> >> [DEBUG] libs/esl/fs_cli.c:1159 main() profile default does not >> >> exist >> >> using >> >> builtin profile >> >> [DEBUG] libs/esl/fs_cli.c:1188 main() Using profile internal >> >> [75.xxx.xxx.xxx] >> >> [ERROR] libs/esl/fs_cli.c:1206 main() Error Connecting [Socket >> >> Connection >> >> Error] >> >> yes mod_event_socket is after  mod_xml_curl but I changed the >> >> order >> >> in >> >>  modules.conf.xml >> >> still getting above (restarted freeswitch) >> >> >> >> thx >> >> deniro-- >> >> >> >> >> >> >> >> On Mon, Feb 28, 2011 at 3:35 AM, Steven Ayre >> >> <steveayre@gmail.com<mailto:steveayre@gmail.com>> wrote: >> >> Enable debug logging and you should see an error that'll tell >> >> you >> >> more. >> >> >> >> Is mod_event_socket loading before or after mod_xml_curl? >> >> Chances >> >> are >> >> mod_xml_curl is loading first, so it's trying to read >> >> event_socket.conf.xml and/or acl.conf.xml through xml_curl and >> >> either >> >> getting a different config to your previous local copy or the >> >> ACLs >> >> are >> >> different. >> >> >> >> What does "netstat -anlp | grep :8021" from the linux cli show >> >> you? >> >> Does it show that freeswitch is actually listening on the >> >> port? >> >> If >> >> it >> >> is it's probably an ACL problem, if it isn't then it's >> >> probably a >> >> problem with event_socket.conf.xml >> >> >> >> -Steve >> >> >> >> On 28 February 2011 00:53, deniro >> >> <ayhkor@gmail.com<mailto:ayhkor@gmail.com>> wrote: >> >> > What would be possible reasons for this and how to resolve? >> >> > running fs 106 on ubuntu 10.04 server >> >> > >> >> > /opt/freeswitch/bin/fs_cli -H xxx.xxx.xxx.xxx -P 8021 >> >> > [ERROR] libs/esl/fs_cli.c:1206 main() Error Connecting >> >> > [Socket >> >> > Connection >> >> > Error] >> >> > was working fine before I installed  mod_xml_cdr >> >> > configure --prefix=/opt/freeswitch --without-libcurl >> >> > make mod_xml_cdr-install >> >> > (no errors) >> >> > >> >> > in modules.conf.xml >> >> > <load module="mod_event_socket"/> >> >> > >> >> > is there a packaged version of mod_xml_cdr (for fs 1.0.6)? >> >> > >> >> > thx >> >> > deniro-- >> >> > _______________________________________________ >> >> > FreeSWITCH-users mailing list >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> >> >> > >> >> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> >> > >> >> > >> >> > >> >> > >> >> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> >> > http://www.freeswitch.org<http://www.freeswitch.org/> >> >> > >> >> > >> >> >> >> _______________________________________________ >> >> FreeSWITCH-users mailing list >> >> >> >> >> >> >> >> >> >> >> >> FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> >> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> >> >> >> >> >> >> >> >> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> >> http://www.freeswitch.org<http://www.freeswitch.org/> >> >> >> >> !DSPAM:4d6c0a1132761029518849! >> >> >> >> _______________________________________________ >> >> FreeSWITCH-users mailing list >> >> FreeSWITCH-users@lists.freeswitch.org >> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> >> >> >> >> >> >> >> >> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> >> http://www.freeswitch.org >> > >> > >> > _______________________________________________ >> > FreeSWITCH-users mailing list >> > FreeSWITCH-users@lists.freeswitch.org >> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> > >> > >> > >> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> > http://www.freeswitch.org >> > >> > >> >> _______________________________________________ >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> >> >> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org > > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > > > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > >

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users

UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users

UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

-- Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire

AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch

FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users

UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

If you don't know what it's for, you've just broken your fs setup. The mod_XML_curl module replaces certain bindings with URLs - dialplan, configuration, directory. Any request to access those generates a http request to the URL you give in the config, so that you can build a script that generates the XML dynamically. Every binding is optional - you do not have to have any of them. The error probably means you had defined a binding but with no URL. Can't say for sure without seeing your old config file though. I'd suggest you read up on the wiki pages if you haven't already done so - http://wiki.freeswitch.org/wiki/Mod_xml_curl. If you don't need the module then I'd not bother loading it. Steve on iPhone On 4 Mar 2011, at 04:08, deniro <ayhkor@gmail.com> wrote:

Alright, I did some googling around "[ERR] mod_xml_curl.c:444 Binding has no url " then uncommented below line in conf/autoload_configs/xml_curl.conf.xml <param name="gateway-url" value="http://www.freeswitch.org/gateway.xml" bindings="dialplan"/> though I don't know what this is for..

Now I am able to load mod_xml_curl no need to re-install everything thanks everyone deniro--

On Thu, Mar 3, 2011 at 3:32 AM, Steven Ayre <steveayre@gmail.com> wrote: freeswitch@xxx@internal> load mod_xml_curl -ERR [module load file routine returned an error]

There's still an error while loading. You need to look at the logs for freeswitch, not the fs_cli ones.

Either run 'fs_cli -l debug' or do '/log 7' within fs_cli

-Steve

On 3 March 2011 00:28, deniro <ayhkor@gmail.com> wrote:

...

ok, I see one under src. I copied that to conf/autoload_configs and looks like I am able to load mod_xml_cdr this way freeswitch@xxxx@internal> load mod_xml_cdr module_exists mod_xml_cdr true same method did not work for mod_xml_curl below is error message after I copied file cp /usr/src/freeswitch-1.0.6/conf/autoload_configs/xml_curl.conf.xml /opt/freeswitch/conf/autoload_configs/xml_curl.conf.xml

freeswitch@xxx@internal> load mod_xml_curl [DEBUG] libs/esl/src/esl.c:1140 esl_send() SEND api load mod_xml_curl console_execute: true [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Content-Type] = [api/response] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Content-Length] = [68] +OK Reloading XML -ERR [module load file routine returned an error] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Content-Type] = [log/data] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Content-Length] = [63] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Level] = [6] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Text-Channel] = [0] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-File] = [mod_enum.c] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Func] = [event_handler] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Line] = [808] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [User-Data] = [] [DEBUG] libs/esl/src/esl.c:1114 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: log/data Content-Length: 63 Log-Level: 6 Text-Channel: 0 Log-File: mod_enum.c Log-Func: event_handler Log-Line: 808 User-Data: _undef_ 2011-03-02 19:23:34.416231 [INFO] mod_enum.c:808 ENUM Reloaded 2011-03-02 19:23:34.416231 [INFO] mod_enum.c:808 ENUM Reloaded [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Content-Type] = [log/data] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Content-Length] = [72] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Level] = [3] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Text-Channel] = [0] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-File] = [mod_xml_curl.c] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Func] = [do_config] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Line] = [444] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [User-Data] = [] [DEBUG] libs/esl/src/esl.c:1114 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: log/data Content-Length: 72 Log-Level: 3 Text-Channel: 0 Log-File: mod_xml_curl.c Log-Func: do_config Log-Line: 444 User-Data: _undef_ 2011-03-02 19:23:34.416231 [ERR] mod_xml_curl.c:444 Binding has no url! 2011-03-02 19:23:34.416231 [ERR] mod_xml_curl.c:444 Binding has no url! [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Content-Type] = [log/data] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Content-Length] = [162] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Level] = [2] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Text-Channel] = [0] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-File] = [switch_loadable_module.c] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Func] = [switch_loadable_module_load_file] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Line] = [926] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [User-Data] = [] [DEBUG] libs/esl/src/esl.c:1114 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: log/data Content-Length: 162 Log-Level: 2 Text-Channel: 0 Log-File: switch_loadable_module.c Log-Func: switch_loadable_module_load_file Log-Line: 926 User-Data: _undef_ 2011-03-02 19:23:34.416231 [CRIT] switch_loadable_module.c:926 Error Loading module /opt/freeswitch/mod/mod_xml_curl.so **Module load routine returned an error** 2011-03-02 19:23:34.416231 [CRIT] switch_loadable_module.c:926 Error Loading module /opt/freeswitch/mod/mod_xml_curl.so **Module load routine returned an error** [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Content-Type] = [log/data] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Content-Length] = [86] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Level] = [6] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Text-Channel] = [0] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-File] = [switch_time.c] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Func] = [switch_load_timezones] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [Log-Line] = [950] [DEBUG] libs/esl/src/esl.c:988 esl_recv_event() RECV HEADER [User-Data] = [] [DEBUG] libs/esl/src/esl.c:1114 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: log/data Content-Length: 86 Log-Level: 6 Text-Channel: 0 Log-File: switch_time.c Log-Func: switch_load_timezones Log-Line: 950 User-Data: _undef_ 2011-03-02 19:23:34.417121 [INFO] switch_time.c:950 Timezone reloaded 530 definitions 2011-03-02 19:23:34.417121 [INFO] switch_time.c:950 Timezone reloaded 530 definitions

On Wed, Mar 2, 2011 at 6:25 PM, Steven Ayre <steveayre@gmail.com> wrote:

...

You need to create its config file. It won't load without it.

"find . -name xml_cdr.conf"

Actually it's xml_cdr.conf.xml, all config files will show .conf as their logical name but on the hard drive they're stored in .conf.xml. It should be in conf/autoload_configs

-Steve

On 2 March 2011 22:25, deniro <ayhkor@gmail.com> wrote:

...

I typed the 4 commands but still unable to load mod_xml_cdr and mod_xml_curl

2011-03-02 17:21:32.139672 [ERR] mod_xml_cdr.c:479 Open of xml_cdr.conf failed /opt# find . -name xml_cdr.conf nothing appears

here is errors from fs_cli -d 7

freeswitch@75.xxx.xxx.xx@internal> load mod_xml_cdr [DEBUG] libs/esl/src/esl.c:1063 esl_send() SEND api load mod_xml_cdr console_execute: true [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Content-Type] = [api/response] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Content-Length] = [50] -ERR [module load file routine returned an error] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Content-Type] = [log/data] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Content-Length] = [79] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-Level] = [3] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Text-Channel] = [0] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-File] = [mod_xml_cdr.c] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-Func] = [mod_xml_cdr_load] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-Line] = [479] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [User-Data] = [] [DEBUG] libs/esl/src/esl.c:1037 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: log/data Content-Length: 79 Log-Level: 3 Text-Channel: 0 Log-File: mod_xml_cdr.c Log-Func: mod_xml_cdr_load Log-Line: 479 User-Data: _undef_ 2011-03-02 17:21:32.139672 [ERR] mod_xml_cdr.c:479 Open of xml_cdr.conf failed [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Content-Type] = [log/data] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Content-Length] = [161] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-Level] = [2] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Text-Channel] = [0] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-File] = [switch_loadable_module.c] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-Func] = [switch_loadable_module_load_file] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [Log-Line] = [882] [DEBUG] libs/esl/src/esl.c:918 esl_recv_event() RECV HEADER [User-Data] = [] [DEBUG] libs/esl/src/esl.c:1037 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: log/data Content-Length: 161 Log-Level: 2 Text-Channel: 0 Log-File: switch_loadable_module.c Log-Func: switch_loadable_module_load_file Log-Line: 882 User-Data: _undef_ 2011-03-02 17:21:32.139672 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_xml_cdr.so **Module load routine returned an error**

On Tue, Mar 1, 2011 at 1:11 PM, Anthony Minessale <anthony.minessale@gmail.com> wrote:

...

like I said you re-installed with a new version of libcurl but did not fully rebuild. So most of the modules that depend on curl were broken torn between the old and new version it was linked to..

had you executed the 4 commands I posted yesterday it would be fine.

On Tue, Mar 1, 2011 at 11:02 AM, deniro <ayhkor@gmail.com> wrote:

...

Thank you all for advice and direction Will re-install from scratch at a later time. deniro--

On Tue, Mar 1, 2011 at 4:16 AM, Steven Ayre <steveayre@gmail.com> wrote: > > Ok, you really need to pay attention to any log message that logs > with > the CRIT (critical) log level - they're really serious errors. You > should look at adding the critical="true" attribute to all the tags > in > modules.conf.xml which you want to be sure are loaded. If a module > fails to load without that tag FS will continue to run anyway, with > that tag it'll refuse to start so you'll know instantly something is > wrong. > > Most of your modules aren't loading, because they haven't been > compiled correctly. Some look like they're missing (no such file or > directory) and others haven't been built right (undefined symbols). > > Here are a few of the important lines from your log: > > 2011-02-28 18:12:21.910738 [CRIT] switch_loadable_module.c:882 Error > Loading module /opt/freeswitch/mod/mod_event_socket.so > **/opt/freeswitch/mod/mod_event_socket.so: undefined symbol: > switch_event_serialize_json** > 2011-02-28 18:12:21.910789 [CRIT] switch_loadable_module.c:882 Error > Loading module /opt/freeswitch/mod/mod_xml_curl.so > **/opt/freeswitch/mod/mod_xml_curl.so: cannot open shared object > file: > No such file or directory** > 2011-02-28 18:12:21.910813 [CRIT] switch_loadable_module.c:882 Error > Loading module /opt/freeswitch/mod/mod_xml_cdr.so > **/opt/freeswitch/mod/mod_xml_cdr.so: cannot open shared object > file: > No such file or directory** > 2011-02-28 18:12:21.911581 [CRIT] switch_loadable_module.c:882 Error > Loading module /opt/freeswitch/mod/mod_commands.so > **/opt/freeswitch/mod/mod_commands.so: undefined symbol: > switch_xml_reload** > 2011-02-28 18:12:21.911709 [CRIT] switch_loadable_module.c:882 Error > Loading module /opt/freeswitch/mod/mod_conference.so > **/opt/freeswitch/mod/mod_conference.so: undefined symbol: > switch_channel_test_app_flag_key** > 2011-02-28 18:12:21.911842 [CRIT] switch_loadable_module.c:882 Error > Loading module /opt/freeswitch/mod/mod_dptools.so > **/opt/freeswitch/mod/mod_dptools.so: undefined symbol: > switch_event_merge** > 2011-02-28 18:12:21.912264 [CRIT] switch_loadable_module.c:882 Error > Loading module /opt/freeswitch/mod/mod_dialplan_xml.so > **/opt/freeswitch/mod/mod_dialplan_xml.so: undefined symbol: > switch_xml_std_datetime_check** > 2011-02-28 18:12:21.912531 [CRIT] switch_loadable_module.c:882 Error > Loading module /opt/freeswitch/mod/mod_g723_1.so > **/opt/freeswitch/mod/mod_g723_1.so: cannot open shared object file: > No such file or directory** > 2011-02-28 18:12:21.912573 [CRIT] switch_loadable_module.c:882 Error > Loading module /opt/freeswitch/mod/mod_g729.so > **/opt/freeswitch/mod/mod_g729.so: cannot open shared object file: > No > such file or directory** > 2011-02-28 18:12:21.912609 [CRIT] switch_loadable_module.c:882 Error > Loading module /opt/freeswitch/mod/mod_amr.so > **/opt/freeswitch/mod/mod_amr.so: cannot open shared object file: No > such file or directory** > > Important things to note: > mod_event_socket hasn't loaded because of a undefined symbol, it > wasn't built correctly > mod_xml_curl hasn't loaded because it doesn't exist, it was either > never built or never installed > > Something pretty strange has happened. Did you recompile when trying > to add mod_xml_curl? > > I'd suggest you delete all the FS files, including the Git clone, > make > a fresh checkout and build it from scratch. > > -Steve > > > > On 28 February 2011 23:18, deniro <ayhkor@gmail.com> wrote: > > I put the log in pastebin > > freeswitch.log only when starting freeswitch (after stop) > > > > http://pastebin.freeswitch.org/15502 > > thx > > deniro > > On Mon, Feb 28, 2011 at 5:46 PM, Steven Ayre <steveayre@gmail.com> > > wrote: > >> > >> You must check the logfile for when FS starts up - if netstat > >> shows > >> nothing for port 8021 then either mod_event_socket isn't being > >> loaded > >> or you'll see an error when it tries to load. > >> > >> Nothing from netstat means nothing's listening, so trying to > >> connect > >> using fs_cli won't do anything. > >> > >> -Steve > >> > >> > >> On 28 February 2011 22:40, deniro <ayhkor@gmail.com> wrote: > >> > Checked the log > >> > Nothing is logged when > >> > fs_cli -d 7 -H 75.xxx.xxx.xxx -P 8021 > >> > is issued > >> > /opt/freeswitch/log# tail -f freeswitch.log > >> > > >> > ls -l freeswitch.log > >> > -rwxrwxrwx 1 freeswitch daemon 33018 2011-02-28 17:39 > >> > freeswitch.log > >> > thx > >> > > >> > > >> > > >> > On Mon, Feb 28, 2011 at 3:59 PM, Peter Olsson > >> > <peter.olsson@visionutveckling.se> wrote: > >> >> > >> >> Check freeswitch.log, it probably reports some problem when > >> >> loading > >> >> the > >> >> mod_event_socket module. > >> >> > >> >> /Peter > >> >> ________________________________________ > >> >> Från: freeswitch-users-bounces@lists.freeswitch.org > >> >> [freeswitch-users-bounces@lists.freeswitch.org] för > >> >> deniro > >> >> [ayhkor@gmail.com] > >> >> Skickat: den 28 februari 2011 21:42 > >> >> Till: FreeSWITCH Users Help > >> >> Ämne: Re: [Freeswitch-users] fs_cli socket connection error > >> >> > >> >> Steve > >> >> Thanks for the reply > >> >> netstat -anlp | grep 8021 is blank (nothing showing up) > >> >> > >> >> /opt/freeswitch/bin/fs_cli -d 7 -H 75.xxx.xxx.xxx -P 8021 > >> >> [DEBUG] libs/esl/src/esl_config.c:56 esl_config_open_file() > >> >> Configuration > >> >> file is /root/.fs_cli_conf. > >> >> [DEBUG] libs/esl/src/esl_config.c:56 esl_config_open_file() > >> >> Configuration > >> >> file is /etc/fs_cli.conf. > >> >> [DEBUG] libs/esl/fs_cli.c:1159 main() profile default does not > >> >> exist > >> >> using > >> >> builtin profile > >> >> [DEBUG] libs/esl/fs_cli.c:1188 main() Using profile internal > >> >> [75.xxx.xxx.xxx] > >> >> [ERROR] libs/esl/fs_cli.c:1206 main() Error Connecting [Socket > >> >> Connection > >> >> Error] > >> >> yes mod_event_socket is after mod_xml_curl but I changed the > >> >> order > >> >> in > >> >> modules.conf.xml > >> >> still getting above (restarted freeswitch) > >> >> > >> >> thx > >> >> deniro-- > >> >> > >> >> > >> >> > >> >> On Mon, Feb 28, 2011 at 3:35 AM, Steven Ayre > >> >> <steveayre@gmail.com<mailto:steveayre@gmail.com>> wrote: > >> >> Enable debug logging and you should see an error that'll tell > >> >> you > >> >> more. > >> >> > >> >> Is mod_event_socket loading before or after mod_xml_curl? > >> >> Chances > >> >> are > >> >> mod_xml_curl is loading first, so it's trying to read > >> >> event_socket.conf.xml and/or acl.conf.xml through xml_curl and > >> >> either > >> >> getting a different config to your previous local copy or the > >> >> ACLs > >> >> are > >> >> different. > >> >> > >> >> What does "netstat -anlp | grep :8021" from the linux cli show > >> >> you? > >> >> Does it show that freeswitch is actually listening on the > >> >> port? > >> >> If > >> >> it > >> >> is it's probably an ACL problem, if it isn't then it's > >> >> probably a > >> >> problem with event_socket.conf.xml > >> >> > >> >> -Steve > >> >> > >> >> On 28 February 2011 00:53, deniro > >> >> <ayhkor@gmail.com<mailto:ayhkor@gmail.com>> wrote: > >> >> > What would be possible reasons for this and how to resolve? > >> >> > running fs 106 on ubuntu 10.04 server > >> >> > > >> >> > /opt/freeswitch/bin/fs_cli -H xxx.xxx.xxx.xxx -P 8021 > >> >> > [ERROR] libs/esl/fs_cli.c:1206 main() Error Connecting > >> >> > [Socket > >> >> > Connection > >> >> > Error] > >> >> > was working fine before I installed mod_xml_cdr > >> >> > configure --prefix=/opt/freeswitch --without-libcurl > >> >> > make mod_xml_cdr-install > >> >> > (no errors) > >> >> > > >> >> > in modules.conf.xml > >> >> > <load module="mod_event_socket"/> > >> >> > > >> >> > is there a packaged version of mod_xml_cdr (for fs 1.0.6)? > >> >> > > >> >> > thx > >> >> > deniro-- > >> >> > _______________________________________________ > >> >> > FreeSWITCH-users mailing list > >> >> > > >> >> > > >> >> > > >> >> > > >> >> > > >> >> > FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> > >> >> > > >> >> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > >> >> > > >> >> > > >> >> > > >> >> > > >> >> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > >> >> > http://www.freeswitch.org<http://www.freeswitch.org/> > >> >> > > >> >> > > >> >> > >> >> _______________________________________________ > >> >> FreeSWITCH-users mailing list > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> > >> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > >> >> > >> >> > >> >> > >> >> > >> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > >> >> http://www.freeswitch.org<http://www.freeswitch.org/> > >> >> > >> >> !DSPAM:4d6c0a1132761029518849! > >> >> > >> >> _______________________________________________ > >> >> FreeSWITCH-users mailing list > >> >> FreeSWITCH-users@lists.freeswitch.org > >> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > >> >> > >> >> > >> >> > >> >> > >> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > >> >> http://www.freeswitch.org > >> > > >> > > >> > _______________________________________________ > >> > FreeSWITCH-users mailing list > >> > FreeSWITCH-users@lists.freeswitch.org > >> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > >> > > >> > > >> > > >> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > >> > http://www.freeswitch.org > >> > > >> > > >> > >> _______________________________________________ > >> FreeSWITCH-users mailing list > >> FreeSWITCH-users@lists.freeswitch.org > >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > >> > >> > >> > >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > >> http://www.freeswitch.org > > > > > > _______________________________________________ > > FreeSWITCH-users mailing list > > FreeSWITCH-users@lists.freeswitch.org > > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > > > > > > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > > http://www.freeswitch.org > > > > > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > > > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users

UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

-- Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire

AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch

FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users

UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org