Yes No confirmation on Outgoing call.
Hiya All. I search for a solution, however I don't know where to even begin looking for this request. I have been ask to be able to provide a "Press 1 to proceed and 2 to cancel" option on outgoing calls, that are specified on a list. I have seen that it I should be able to evaluate a list using the dial plan, and that Outgoing IVR can allow some sort of menu interaction. However this seems to not quite fit what I need. Does anyone have any idea where I can start looking? Regards Liam
Hiya All. A little more searching and would it be possible to do the following. Have a Dial-Plan evaluate a list (xml) if the number is on this list then pass the call to an "Answer Confirmation" http://wiki.freeswitch.org/wiki/Freeswitch_IVR_Originate#Answer_confirmation Could this then allow the call to proceed if 1 is pressed and hangup if 2 is? Regards Liam On 03/04/2014 14:48, Liam Carter wrote:
Hiya All.
I search for a solution, however I don't know where to even begin looking for this request.
I have been ask to be able to provide a "Press 1 to proceed and 2 to cancel" option on outgoing calls, that are specified on a list.
I have seen that it I should be able to evaluate a list using the dial plan, and that Outgoing IVR can allow some sort of menu interaction.
However this seems to not quite fit what I need.
Does anyone have any idea where I can start looking?
Regards
Liam
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Liam Carter | E2E Software Ltd -------------------------------------------- T: +44 0843 463 1587 | M: +44 7429 047 021 -------------------------------------------- www.yii-crm.com | Skype: liamgcarter
Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node.However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users.Should I look at any other GUIs? I am running against time, as I need it functioning in a few days.My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right. Question 1:Keep getting this message:"[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151] from 10.50.1.151You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials." I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder).Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem. Question 2:As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there. Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added? Thank you.A.C.
Perhaps the SBC from Sangoma would work for you. Hope its not taboo to say this. On Apr 3, 2014 12:49 PM, "Adelia C." <hexade@hotmail.com> wrote:
Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users. Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right.
Question 1: Keep getting this message: "[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials."
I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem.
Question 2: As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there.
Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added?
Thank you. A.C.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hiya. I am trying out Bluebox at the moment. Regards Liam On 03/04/14 17:48, Adelia C. wrote:
Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users. Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right.
Question 1: Keep getting this message: "[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials."
I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem.
Question 2: As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there.
Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added?
Thank you. A.C.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Liam, Where did you get your copy of Bluebox? I thought they had ceased all development on that concentrating on Kazoo instead? On Thu, Apr 3, 2014 at 1:03 PM, Liam Carter <liam@yii-crm.com> wrote:
Hiya.
I am trying out Bluebox at the moment.
Regards
Liam
On 03/04/14 17:48, Adelia C. wrote:
Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users. Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right.
Question 1: Keep getting this message: "[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials."
I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem.
Question 2: As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there.
Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added?
Thank you. A.C.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
That's what I read as well - Kazoo vs. Bluebox. Although a Darren Schreiber comment/reply on a similar thread mentioned Bluebox will be kept alive with minimal dev, I am wary to go that road. Kazoo looks a bit big for what I need. To rephrase my question then - any successful Kazoo users out there (and has it been easy to use)? Still waiting on some happy FusionPBX users. I like it but I need something that makes my life easier not adds to the difficulty of a first setup. Thx.A.C.
Date: Thu, 3 Apr 2014 13:25:02 -0400 From: phil@cbasoftware.com To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying?
Liam,
Where did you get your copy of Bluebox? I thought they had ceased all development on that concentrating on Kazoo instead?
On Thu, Apr 3, 2014 at 1:03 PM, Liam Carter <liam@yii-crm.com> wrote:
Hiya.
I am trying out Bluebox at the moment.
Regards
Liam
On 03/04/14 17:48, Adelia C. wrote:
Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users. Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right.
Question 1: Keep getting this message: "[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials."
I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem.
Question 2: As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there.
Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added?
Thank you. A.C.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Adelia, Hopefully what I'm about to say will not disrupt everything. However, since I'm over 60 I don't worry about things like that much anymore. 1. FreeSWITCH is, without a doubt the most sophisticated and capable softswitch out there now. However, it is not the easiest to work with nor the simplest. With sophistication and capabilities and speed you also gain complexity. BTW, I've had more than a bit of experience with Kazoo and 2600hz and that product makes FS and Fusion easy. I won't get started on that. 2. FusionPBX does work. I've gotten it to work. As you have found, it's not the easiest to setup. And, it's basically supported by a single person. He does try to help and he provides classes with some regularity. 3. If you are not planning on making VoIP your life work (which it sounds like you're not) may I recommend (without getting flamed too much) that you look at Asterisk? I believe you'll find the amount of support is much more complete both in GUIs available and just general support. There are whole lot more people using Asterisk than FS. I will tell you, you can't do multi-tenant (at least not reasonably - before I get flamed by the Asterisk folks out there too!). And, it also cannot handle anywhere near the number of concurrent calls that FS can. But, if you're mostly interested in getting something off the ground, you're going to do in-house installation and you're going to have < 100 concurrent calls (this is a very conservative estimate and greatly depends on your hardware, etc) then please take a look at Asterisk. Regards On Thu, Apr 3, 2014 at 1:35 PM, Adelia C. <hexade@hotmail.com> wrote:
That's what I read as well - Kazoo vs. Bluebox. Although a Darren Schreiber comment/reply on a similar thread mentioned Bluebox will be kept alive with minimal dev, I am wary to go that road. Kazoo looks a bit big for what I need.
To rephrase my question then - any successful Kazoo users out there (and has it been easy to use)?
Still waiting on some happy FusionPBX users. I like it but I need something that makes my life easier not adds to the difficulty of a first setup.
Thx. A.C.
Date: Thu, 3 Apr 2014 13:25:02 -0400 From: phil@cbasoftware.com To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying?
Liam,
Where did you get your copy of Bluebox? I thought they had ceased all development on that concentrating on Kazoo instead?
On Thu, Apr 3, 2014 at 1:03 PM, Liam Carter <liam@yii-crm.com> wrote:
Hiya.
I am trying out Bluebox at the moment.
Regards
Liam
On 03/04/14 17:48, Adelia C. wrote:
Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users. Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right.
Question 1: Keep getting this message: "[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials."
I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck:
http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem.
Question 2: As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there.
Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added?
Thank you. A.C.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hiya Phil http://www.2600hz.org/bluebox_download.html Is where i got it and it runs well on centos Regards Liam On 03/04/2014 18:25, Phil Mickelson wrote:
Liam,
Where did you get your copy of Bluebox? I thought they had ceased all development on that concentrating on Kazoo instead?
On Thu, Apr 3, 2014 at 1:03 PM, Liam Carter <liam@yii-crm.com> wrote:
Hiya.
I am trying out Bluebox at the moment.
Regards
Liam
On 03/04/14 17:48, Adelia C. wrote:
Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users. Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right.
Question 1: Keep getting this message: "[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials."
I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem.
Question 2: As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there.
Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added?
Thank you. A.C.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Liam Carter | E2E Software Ltd -------------------------------------------- T: +44 0843 463 1587 | M: +44 7429 047 021 -------------------------------------------- www.yii-crm.com | Skype: liamgcarter
For what you want, fusionpbx should work, at least I have done it. I did have to modify some profiles, but those then never change. You should be able to add uusers in the gui and it will generate a password. I would add them as extensions, rather than users. Liam Carter <liam@yii-crm.com> wrote:
Hiya.
I am trying out Bluebox at the moment.
Regards
Liam
On 03/04/14 17:48, Adelia C. wrote:
Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users. Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right.
Question 1: Keep getting this message: "[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials."
I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem.
Question 2: As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there.
Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added?
Thank you. A.C.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
---------------------------------------------------- Alternatives:
---------------------------------------------------- _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici covici@ccs.covici.com
Thank you. Do you know why all the components I added seem to be gone once I started adding files manually? I added 2 devices (one Cisco, one unnamed - for my SjPhone), users, extensions (following the FusionPBX online instructions) but then got frustrated by the error message I kept getting ("define a domain in your directory, add user and configure a device"). I though I did all that - through the GUI.Files were generated and correctly put in the right places - as far as I can tell - but still no success. When I started messing with files on FreeSwitch, I lost teh GUI - i.e. I can't see any device, user, etc.I am logged into FreeSwitch (see the logout option) - not sure what I am missing and what else to try. I add new users via FusionPBX (for example) and the file shows up in conf/directory but is not visible in the GUI.Any idea why this might happen? I can always start fresh, restore my conf directory and try again. Thx.A.C.
To: freeswitch-users@lists.freeswitch.org Date: Thu, 3 Apr 2014 13:32:51 -0400 From: covici@ccs.covici.com Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying?
For what you want, fusionpbx should work, at least I have done it. I did have to modify some profiles, but those then never change. You should be able to add uusers in the gui and it will generate a password. I would add them as extensions, rather than users.
Liam Carter <liam@yii-crm.com> wrote:
Hiya.
I am trying out Bluebox at the moment.
Regards
Liam
On 03/04/14 17:48, Adelia C. wrote:
Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users. Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right.
Question 1: Keep getting this message: "[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials."
I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem.
Question 2: As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there.
Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added?
Thank you. A.C.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
---------------------------------------------------- Alternatives:
---------------------------------------------------- _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Your life is like a penny. You're going to lose it. The question is: How do you spend it?
John Covici covici@ccs.covici.com
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I would start over again, just add the extensions and register the phones manually. Don't add any files, I know how to fool with that, but you have to do them in a certain way -- maybe we can discuss off list. Adelia C. <hexade@hotmail.com> wrote:
Thank you. Do you know why all the components I added seem to be gone once I started adding files manually? I added 2 devices (one Cisco, one unnamed - for my SjPhone), users, extensions (following the FusionPBX online instructions) but then got frustrated by the error message I kept getting ("define a domain in your directory, add user and configure a device"). I though I did all that - through the GUI.Files were generated and correctly put in the right places - as far as I can tell - but still no success. When I started messing with files on FreeSwitch, I lost teh GUI - i.e. I can't see any device, user, etc.I am logged into FreeSwitch (see the logout option) - not sure what I am missing and what else to try. I add new users via FusionPBX (for example) and the file shows up in conf/directory but is not visible in the GUI.Any idea why this might happen? I can always start fresh, restore my conf directory and try again. Thx.A.C.
To: freeswitch-users@lists.freeswitch.org Date: Thu, 3 Apr 2014 13:32:51 -0400 From: covici@ccs.covici.com Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying?
For what you want, fusionpbx should work, at least I have done it. I did have to modify some profiles, but those then never change. You should be able to add uusers in the gui and it will generate a password. I would add them as extensions, rather than users.
Liam Carter <liam@yii-crm.com> wrote:
Hiya.
I am trying out Bluebox at the moment.
Regards
Liam
On 03/04/14 17:48, Adelia C. wrote:
Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users. Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right.
Question 1: Keep getting this message: "[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials."
I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem.
Question 2: As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there.
Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added?
Thank you. A.C.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
---------------------------------------------------- Alternatives:
---------------------------------------------------- _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Your life is like a penny. You're going to lose it. The question is: How do you spend it?
John Covici covici@ccs.covici.com
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
---------------------------------------------------- Alternatives:
---------------------------------------------------- _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici covici@ccs.covici.com
Hi, We are very close to releasing a PRE BETA version of my FreeSWITCH powered PBX RockSolidPBX. It "may" be mature enough for what you need, if not, I would value all feedback so that we can make it better. If you are interest, please email me at richard@rocksolidpbx.co.uk and I'll email you privately. Sorry for the "noise" on the list without an [ANN] :) Richard RockSolidPBX On 3 April 2014 18:54, <covici@ccs.covici.com> wrote:
I would start over again, just add the extensions and register the phones manually. Don't add any files, I know how to fool with that, but you have to do them in a certain way -- maybe we can discuss off list.
Adelia C. <hexade@hotmail.com> wrote:
Thank you. Do you know why all the components I added seem to be gone once I started adding files manually? I added 2 devices (one Cisco, one unnamed - for my SjPhone), users, extensions (following the FusionPBX online instructions) but then got frustrated by the error message I kept getting ("define a domain in your directory, add user and configure a device"). I though I did all that - through the GUI.Files were generated and correctly put in the right places - as far as I can tell - but still no success. When I started messing with files on FreeSwitch, I lost teh GUI - i.e. I can't see any device, user, etc.I am logged into FreeSwitch (see the logout option) - not sure what I am missing and what else to try. I add new users via FusionPBX (for example) and the file shows up in conf/directory but is not visible in the GUI.Any idea why this might happen? I can always start fresh, restore my conf directory and try again. Thx.A.C.
To: freeswitch-users@lists.freeswitch.org Date: Thu, 3 Apr 2014 13:32:51 -0400 From: covici@ccs.covici.com Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying?
For what you want, fusionpbx should work, at least I have done it. I did have to modify some profiles, but those then never change. You should be able to add uusers in the gui and it will generate a password. I would add them as extensions, rather than users.
Liam Carter <liam@yii-crm.com> wrote:
Hiya.
I am trying out Bluebox at the moment.
Regards
Liam
On 03/04/14 17:48, Adelia C. wrote:
Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users. Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right.
Question 1: Keep getting this message: "[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials."
I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck:
http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h...
If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem.
Question 2: As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there.
Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added?
Thank you. A.C.
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
---------------------------------------------------- Alternatives:
----------------------------------------------------
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Your life is like a penny. You're going to lose it. The question is: How do you spend it?
John Covici covici@ccs.covici.com
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
---------------------------------------------------- Alternatives:
---------------------------------------------------- _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Your life is like a penny. You're going to lose it. The question is: How do you spend it?
John Covici covici@ccs.covici.com
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" With Fusion multitenant you need to register to the FQDN of the domain. You should also only use the GUI to modify XML, as the manual edits will be overwritten. You can visit IRC #FusionPBX for more help, they also have paid support offerings on their website. You should also look at Cudatel appliance if you are running against time. Thanks, Moishe Grunstein Tornado Computer Systems, Inc. 212.400.7650 888.IPPBX.US Service Request Email: support@nysolutions.com<mailto:support@nysolutions.com> Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified [cid:image001.jpg@01C72F94.9EE45D60]<http://www.nysolutions.com/> Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Adelia C. Sent: Thursday, April 03, 2014 12:49 PM To: FreeSWITCH Users Help Subject: [Freeswitch-users] FusionPBX - any other options or should I keep trying? Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users. Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right. Question 1: Keep getting this message: "[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials." I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem. Question 2: As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there. Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added? Thank you. A.C.
Thank you! Very useful!A.C. From: max@nysolutions.com To: freeswitch-users@lists.freeswitch.org Date: Thu, 3 Apr 2014 18:13:48 +0000 Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" With Fusion multitenant you need to register to the FQDN of the domain. You should also only use the GUI to modify XML, as the manual edits will be overwritten. You can visit IRC #FusionPBX for more help, they also have paid support offerings on their website. You should also look at Cudatel appliance if you are running against time. Thanks, Moishe Grunstein Tornado Computer Systems, Inc. 212.400.7650 888.IPPBX.US Service Request Email: support@nysolutions.com Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Adelia C. Sent: Thursday, April 03, 2014 12:49 PM To: FreeSWITCH Users Help Subject: [Freeswitch-users] FusionPBX - any other options or should I keep trying? Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users. Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right. Question 1: Keep getting this message: "[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials." I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem. Question 2: As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there. Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added? Thank you. A.C. _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
You're not alone but I'm able to manage. I assume you're NOT setting a multi-tenant system. Here's some things to look for: Check the Variables (conf/vars.xml): domain=${local_ip_v4} domain_name=${domain} Then check this line in conf/sip_profiles/default.xml: domain=${domain} Check these lines too: sip-ip=${local_ip_v4} rtp-ip=${{local_ip_v4} You may delete/disable these : ext-sip-ip ext-rtp-ip Delete the created files and folder 10.50.1.151. They will conflict conf/default.xml. Check Advanced>Domains. If it's set 10.50.1.151, I think that entry created these directory and file. Try to set this to "default". Restart the system. Hope you'll get started. /Nandy On Fri, Apr 4, 2014 at 12:48 AM, Adelia C. <hexade@hotmail.com> wrote:
Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users. Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right.
Question 1: Keep getting this message: "[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials."
I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem.
Question 2: As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there.
Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added?
Thank you. A.C.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Before starting with a clean "conf", I gave it another try - logged out and back into FusionPBX and lo' and behold - all my users and devices were there. Domains, too. I opened one of the domains to look at it - and for some reason, instead of pushing "back", I pushed "save".All config in the GUI - gone again. Same thing that happened yesterday but I wasn't paying attention and know what triggered that behavior.Logged out and in again - users, etc - all visible. I can repeat that pretty consistently. Maybe I am doing something wrong but - as a beginner - this fazed me. I don't understand what I am doing wrong. I am still logged in as a sysadmin.I had already run "chmod -R 777" on /directory, based on some wiki pages. Nor sure why this is happening. As part of the install, I selected MyQSL and not sqlite (some wiki pages suggest that would be a bad idea).One more bit of info (at this time I don't really know what is significant and what not) - I wanted to enable more debug and went to switch.conf.xml to enable <param name="debug-level" value="10"/> I got swamped by "Reuse Unused Cached DB handle" from the callcenter module. I don't need that functionality, my install is just 2-3 days so I ignored older threads on how to deal with this. I reset my debug level to get rid of the noise. Going to try everyone suggested yesterday and today. Thx,A.C. Date: Fri, 4 Apr 2014 08:31:04 +0800 From: nandy1925@gmail.com To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? You're not alone but I'm able to manage. I assume you're NOT setting a multi-tenant system. Here's some things to look for: Check the Variables (conf/vars.xml): domain=${local_ip_v4}domain_name=${domain} Then check this line in conf/sip_profiles/default.xml:domain=${domain} Check these lines too:sip-ip=${local_ip_v4} rtp-ip=${{local_ip_v4} You may delete/disable these :ext-sip-ipext-rtp-ip Delete the created files and folder 10.50.1.151. They will conflict conf/default.xml. Check Advanced>Domains. If it's set 10.50.1.151, I think that entry created these directory and file. Try to set this to "default". Restart the system. Hope you'll get started. /Nandy On Fri, Apr 4, 2014 at 12:48 AM, Adelia C. <hexade@hotmail.com> wrote: Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users.Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right. Question 1:Keep getting this message:"[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials." I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem. Question 2:As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there. Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added? Thank you.A.C. _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Oh man! deleted that second domain 10.50.1.151. That's what confused me - I can switch between domains.I didn't even notice that extra selection in the upper right corner. My bad.I added it because of the registration failure that prompts me to add a domain. Nandy - I don't have conf/sip_profiles/default.xml. Should it be there? Thx,A.C. From: hexade@hotmail.com To: freeswitch-users@lists.freeswitch.org Date: Fri, 4 Apr 2014 16:07:37 -0400 Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? Before starting with a clean "conf", I gave it another try - logged out and back into FusionPBX and lo' and behold - all my users and devices were there. Domains, too. I opened one of the domains to look at it - and for some reason, instead of pushing "back", I pushed "save".All config in the GUI - gone again. Same thing that happened yesterday but I wasn't paying attention and know what triggered that behavior.Logged out and in again - users, etc - all visible. I can repeat that pretty consistently. Maybe I am doing something wrong but - as a beginner - this fazed me. I don't understand what I am doing wrong. I am still logged in as a sysadmin.I had already run "chmod -R 777" on /directory, based on some wiki pages. Nor sure why this is happening. As part of the install, I selected MyQSL and not sqlite (some wiki pages suggest that would be a bad idea).One more bit of info (at this time I don't really know what is significant and what not) - I wanted to enable more debug and went to switch.conf.xml to enable <param name="debug-level" value="10"/> I got swamped by "Reuse Unused Cached DB handle" from the callcenter module. I don't need that functionality, my install is just 2-3 days so I ignored older threads on how to deal with this. I reset my debug level to get rid of the noise. Going to try everyone suggested yesterday and today. Thx,A.C. Date: Fri, 4 Apr 2014 08:31:04 +0800 From: nandy1925@gmail.com To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? You're not alone but I'm able to manage. I assume you're NOT setting a multi-tenant system. Here's some things to look for: Check the Variables (conf/vars.xml): domain=${local_ip_v4}domain_name=${domain} Then check this line in conf/sip_profiles/default.xml:domain=${domain} Check these lines too:sip-ip=${local_ip_v4} rtp-ip=${{local_ip_v4} You may delete/disable these :ext-sip-ipext-rtp-ip Delete the created files and folder 10.50.1.151. They will conflict conf/default.xml. Check Advanced>Domains. If it's set 10.50.1.151, I think that entry created these directory and file. Try to set this to "default". Restart the system. Hope you'll get started. /Nandy On Fri, Apr 4, 2014 at 12:48 AM, Adelia C. <hexade@hotmail.com> wrote: Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users.Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right. Question 1:Keep getting this message:"[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials." I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem. Question 2:As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there. Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added? Thank you.A.C. _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Deleting the domain does not convert it back to a single domain system, once you add a 2nd domain, the system is converted in to a multi-tenant system not very easy to revert. Thanks, Moishe Grunstein Tornado Computer Systems, Inc. 212.400.7650 888.IPPBX.US Service Request Email: support@nysolutions.com<mailto:support@nysolutions.com> Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified [cid:image001.jpg@01C72F94.9EE45D60]<http://www.nysolutions.com/> Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Adelia C. Sent: Friday, April 04, 2014 4:21 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? Oh man! deleted that second domain 10.50.1.151. That's what confused me - I can switch between domains. I didn't even notice that extra selection in the upper right corner. My bad. I added it because of the registration failure that prompts me to add a domain. Nandy - I don't have conf/sip_profiles/default.xml. Should it be there? Thx, A.C. ________________________________ From: hexade@hotmail.com<mailto:hexade@hotmail.com> To: freeswitch-users@lists.freeswitch.org<mailto:freeswitch-users@lists.freeswitch.org> Date: Fri, 4 Apr 2014 16:07:37 -0400 Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? Before starting with a clean "conf", I gave it another try - logged out and back into FusionPBX and lo' and behold - all my users and devices were there. Domains, too. I opened one of the domains to look at it - and for some reason, instead of pushing "back", I pushed "save". All config in the GUI - gone again. Same thing that happened yesterday but I wasn't paying attention and know what triggered that behavior. Logged out and in again - users, etc - all visible. I can repeat that pretty consistently. Maybe I am doing something wrong but - as a beginner - this fazed me. I don't understand what I am doing wrong. I am still logged in as a sysadmin. I had already run "chmod -R 777" on /directory, based on some wiki pages. Nor sure why this is happening. As part of the install, I selected MyQSL and not sqlite (some wiki pages suggest that would be a bad idea). One more bit of info (at this time I don't really know what is significant and what not) - I wanted to enable more debug and went to switch.conf.xml to enable <param name="debug-level" value="10"/> I got swamped by "Reuse Unused Cached DB handle" from the callcenter module. I don't need that functionality, my install is just 2-3 days so I ignored older threads on how to deal with this. I reset my debug level to get rid of the noise. Going to try everyone suggested yesterday and today. Thx, A.C. ________________________________ Date: Fri, 4 Apr 2014 08:31:04 +0800 From: nandy1925@gmail.com<mailto:nandy1925@gmail.com> To: freeswitch-users@lists.freeswitch.org<mailto:freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? You're not alone but I'm able to manage. I assume you're NOT setting a multi-tenant system. Here's some things to look for: Check the Variables (conf/vars.xml): domain=${local_ip_v4} domain_name=${domain} Then check this line in conf/sip_profiles/default.xml: domain=${domain} Check these lines too: sip-ip=${local_ip_v4} rtp-ip=${{local_ip_v4} You may delete/disable these : ext-sip-ip ext-rtp-ip Delete the created files and folder 10.50.1.151. They will conflict conf/default.xml. Check Advanced>Domains. If it's set 10.50.1.151, I think that entry created these directory and file. Try to set this to "default". Restart the system. Hope you'll get started. /Nandy On Fri, Apr 4, 2014 at 12:48 AM, Adelia C. <hexade@hotmail.com<mailto:hexade@hotmail.com>> wrote: Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users. Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right. Question 1: Keep getting this message: "[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151<mailto:1000@10.50.1.151>] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials." I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem. Question 2: As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there. Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added? Thank you. A.C. _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I realize this now. I managed to complicate an easy install.What's my best bet to recover? How do I delete EVERYTHING and start fresh?Thank you.A.C. From: max@nysolutions.com To: freeswitch-users@lists.freeswitch.org Date: Fri, 4 Apr 2014 21:11:51 +0000 Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? Deleting the domain does not convert it back to a single domain system, once you add a 2nd domain, the system is converted in to a multi-tenant system not very easy to revert. Thanks, Moishe Grunstein Tornado Computer Systems, Inc. 212.400.7650 888.IPPBX.US Service Request Email: support@nysolutions.com Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Adelia C. Sent: Friday, April 04, 2014 4:21 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? Oh man! deleted that second domain 10.50.1.151. That's what confused me - I can switch between domains. I didn't even notice that extra selection in the upper right corner. My bad. I added it because of the registration failure that prompts me to add a domain. Nandy - I don't have conf/sip_profiles/default.xml. Should it be there? Thx, A.C. From: hexade@hotmail.com To: freeswitch-users@lists.freeswitch.org Date: Fri, 4 Apr 2014 16:07:37 -0400 Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? Before starting with a clean "conf", I gave it another try - logged out and back into FusionPBX and lo' and behold - all my users and devices were there. Domains, too. I opened one of the domains to look at it - and for some reason, instead of pushing "back", I pushed "save". All config in the GUI - gone again. Same thing that happened yesterday but I wasn't paying attention and know what triggered that behavior. Logged out and in again - users, etc - all visible. I can repeat that pretty consistently. Maybe I am doing something wrong but - as a beginner - this fazed me. I don't understand what I am doing wrong. I am still logged in as a sysadmin. I had already run "chmod -R 777" on /directory, based on some wiki pages. Nor sure why this is happening. As part of the install, I selected MyQSL and not sqlite (some wiki pages suggest that would be a bad idea). One more bit of info (at this time I don't really know what is significant and what not) - I wanted to enable more debug and went to switch.conf.xml to enable <param name="debug-level" value="10"/> I got swamped by "Reuse Unused Cached DB handle" from the callcenter module. I don't need that functionality, my install is just 2-3 days so I ignored older threads on how to deal with this. I reset my debug level to get rid of the noise. Going to try everyone suggested yesterday and today. Thx, A.C. Date: Fri, 4 Apr 2014 08:31:04 +0800 From: nandy1925@gmail.com To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? You're not alone but I'm able to manage. I assume you're NOT setting a multi-tenant system. Here's some things to look for: Check the Variables (conf/vars.xml): domain=${local_ip_v4} domain_name=${domain} Then check this line in conf/sip_profiles/default.xml: domain=${domain} Check these lines too: sip-ip=${local_ip_v4} rtp-ip=${{local_ip_v4} You may delete/disable these : ext-sip-ip ext-rtp-ip Delete the created files and folder 10.50.1.151. They will conflict conf/default.xml. Check Advanced>Domains. If it's set 10.50.1.151, I think that entry created these directory and file. Try to set this to "default". Restart the system. Hope you'll get started. /Nandy On Fri, Apr 4, 2014 at 12:48 AM, Adelia C. <hexade@hotmail.com> wrote: Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users. Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right. Question 1: Keep getting this message: "[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials." I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem. Question 2: As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there. Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added? Thank you. A.C. _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Delete the db and delete config.php. Thanks, Moishe Grunstein Tornado Computer Systems, Inc. 212.400.7650 888.IPPBX.US Service Request Email: support@nysolutions.com<mailto:support@nysolutions.com> Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified [cid:image001.jpg@01C72F94.9EE45D60]<http://www.nysolutions.com/> Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Adelia C. Sent: Friday, April 04, 2014 6:25 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? I realize this now. I managed to complicate an easy install. What's my best bet to recover? How do I delete EVERYTHING and start fresh? Thank you. A.C. ________________________________ From: max@nysolutions.com<mailto:max@nysolutions.com> To: freeswitch-users@lists.freeswitch.org<mailto:freeswitch-users@lists.freeswitch.org> Date: Fri, 4 Apr 2014 21:11:51 +0000 Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? Deleting the domain does not convert it back to a single domain system, once you add a 2nd domain, the system is converted in to a multi-tenant system not very easy to revert. Thanks, Moishe Grunstein Tornado Computer Systems, Inc. 212.400.7650 888.IPPBX.US Service Request Email: support@nysolutions.com<mailto:support@nysolutions.com> Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified [cid:image001.jpg@01C72F94.9EE45D60]<http://www.nysolutions.com/> Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS From: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Adelia C. Sent: Friday, April 04, 2014 4:21 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? Oh man! deleted that second domain 10.50.1.151. That's what confused me - I can switch between domains. I didn't even notice that extra selection in the upper right corner. My bad. I added it because of the registration failure that prompts me to add a domain. Nandy - I don't have conf/sip_profiles/default.xml. Should it be there? Thx, A.C. ________________________________ From: hexade@hotmail.com<mailto:hexade@hotmail.com> To: freeswitch-users@lists.freeswitch.org<mailto:freeswitch-users@lists.freeswitch.org> Date: Fri, 4 Apr 2014 16:07:37 -0400 Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? Before starting with a clean "conf", I gave it another try - logged out and back into FusionPBX and lo' and behold - all my users and devices were there. Domains, too. I opened one of the domains to look at it - and for some reason, instead of pushing "back", I pushed "save". All config in the GUI - gone again. Same thing that happened yesterday but I wasn't paying attention and know what triggered that behavior. Logged out and in again - users, etc - all visible. I can repeat that pretty consistently. Maybe I am doing something wrong but - as a beginner - this fazed me. I don't understand what I am doing wrong. I am still logged in as a sysadmin. I had already run "chmod -R 777" on /directory, based on some wiki pages. Nor sure why this is happening. As part of the install, I selected MyQSL and not sqlite (some wiki pages suggest that would be a bad idea). One more bit of info (at this time I don't really know what is significant and what not) - I wanted to enable more debug and went to switch.conf.xml to enable <param name="debug-level" value="10"/> I got swamped by "Reuse Unused Cached DB handle" from the callcenter module. I don't need that functionality, my install is just 2-3 days so I ignored older threads on how to deal with this. I reset my debug level to get rid of the noise. Going to try everyone suggested yesterday and today. Thx, A.C. ________________________________ Date: Fri, 4 Apr 2014 08:31:04 +0800 From: nandy1925@gmail.com<mailto:nandy1925@gmail.com> To: freeswitch-users@lists.freeswitch.org<mailto:freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? You're not alone but I'm able to manage. I assume you're NOT setting a multi-tenant system. Here's some things to look for: Check the Variables (conf/vars.xml): domain=${local_ip_v4} domain_name=${domain} Then check this line in conf/sip_profiles/default.xml: domain=${domain} Check these lines too: sip-ip=${local_ip_v4} rtp-ip=${{local_ip_v4} You may delete/disable these : ext-sip-ip ext-rtp-ip Delete the created files and folder 10.50.1.151. They will conflict conf/default.xml. Check Advanced>Domains. If it's set 10.50.1.151, I think that entry created these directory and file. Try to set this to "default". Restart the system. Hope you'll get started. /Nandy On Fri, Apr 4, 2014 at 12:48 AM, Adelia C. <hexade@hotmail.com<mailto:hexade@hotmail.com>> wrote: Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users. Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right. Question 1: Keep getting this message: "[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151<mailto:1000@10.50.1.151>] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials." I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem. Question 2: As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there. Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added? Thank you. A.C. _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I mean conf/sip_profiles/internal.xml /Nandy On Sat, Apr 5, 2014 at 4:20 AM, Adelia C. <hexade@hotmail.com> wrote:
Oh man! deleted that second domain 10.50.1.151. That's what confused me - I can switch between domains. I didn't even notice that extra selection in the upper right corner. My bad. I added it because of the registration failure that prompts me to add a domain.
Nandy - I don't have conf/sip_profiles/default.xml. Should it be there?
Thx, A.C.
------------------------------ From: hexade@hotmail.com To: freeswitch-users@lists.freeswitch.org Date: Fri, 4 Apr 2014 16:07:37 -0400
Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying?
Before starting with a clean "conf", I gave it another try - logged out and back into FusionPBX and lo' and behold - all my users and devices were there. Domains, too.
I opened one of the domains to look at it - and for some reason, instead of pushing "back", I pushed "save". All config in the GUI - gone again.
Same thing that happened yesterday but I wasn't paying attention and know what triggered that behavior. Logged out and in again - users, etc - all visible. I can repeat that pretty consistently. Maybe I am doing something wrong but - as a beginner - this fazed me. I don't understand what I am doing wrong. I am still logged in as a sysadmin. I had already run "chmod -R 777" on /directory, based on some wiki pages. Nor sure why this is happening.
As part of the install, I selected MyQSL and not sqlite (some wiki pages suggest that would be a bad idea). One more bit of info (at this time I don't really know what is significant and what not) - I wanted to enable more debug and went to switch.conf.xml to enable <param name="debug-level" value="10"/> I got swamped by "*Reuse Unused* Cached DB handle" from the callcenter module. I don't need that functionality, my install is just 2-3 days so I ignored older threads on how to deal with this. I reset my debug level to get rid of the noise.
Going to try everyone suggested yesterday and today.
Thx, A.C.
------------------------------ Date: Fri, 4 Apr 2014 08:31:04 +0800 From: nandy1925@gmail.com To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying?
You're not alone but I'm able to manage. I assume you're NOT setting a multi-tenant system. Here's some things to look for:
Check the Variables (conf/vars.xml): domain=${local_ip_v4} domain_name=${domain}
Then check this line in conf/sip_profiles/default.xml: domain=${domain}
Check these lines too: sip-ip=${local_ip_v4} rtp-ip=${{local_ip_v4}
You may delete/disable these : ext-sip-ip ext-rtp-ip
Delete the created files and folder 10.50.1.151. They will conflict conf/default.xml. Check Advanced>Domains. If it's set 10.50.1.151, I think that entry created these directory and file. Try to set this to "default".
Restart the system. Hope you'll get started.
/Nandy
On Fri, Apr 4, 2014 at 12:48 AM, Adelia C. <hexade@hotmail.com> wrote:
Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users. Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right.
Question 1: Keep getting this message: "[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials."
I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem.
Question 2: As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there.
Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added?
Thank you. A.C.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
You would be better off using Postgres than MYSQL, MYSQL would need odbc, postgres can be compiled in the core Thanks, Moishe Grunstein Tornado Computer Systems, Inc. 212.400.7650 888.IPPBX.US Service Request Email: support@nysolutions.com<mailto:support@nysolutions.com> Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified [cid:image001.jpg@01C72F94.9EE45D60]<http://www.nysolutions.com/> Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Adelia C. Sent: Friday, April 04, 2014 4:08 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? Before starting with a clean "conf", I gave it another try - logged out and back into FusionPBX and lo' and behold - all my users and devices were there. Domains, too. I opened one of the domains to look at it - and for some reason, instead of pushing "back", I pushed "save". All config in the GUI - gone again. Same thing that happened yesterday but I wasn't paying attention and know what triggered that behavior. Logged out and in again - users, etc - all visible. I can repeat that pretty consistently. Maybe I am doing something wrong but - as a beginner - this fazed me. I don't understand what I am doing wrong. I am still logged in as a sysadmin. I had already run "chmod -R 777" on /directory, based on some wiki pages. Nor sure why this is happening. As part of the install, I selected MyQSL and not sqlite (some wiki pages suggest that would be a bad idea). One more bit of info (at this time I don't really know what is significant and what not) - I wanted to enable more debug and went to switch.conf.xml to enable <param name="debug-level" value="10"/> I got swamped by "Reuse Unused Cached DB handle" from the callcenter module. I don't need that functionality, my install is just 2-3 days so I ignored older threads on how to deal with this. I reset my debug level to get rid of the noise. Going to try everyone suggested yesterday and today. Thx, A.C. ________________________________ Date: Fri, 4 Apr 2014 08:31:04 +0800 From: nandy1925@gmail.com<mailto:nandy1925@gmail.com> To: freeswitch-users@lists.freeswitch.org<mailto:freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? You're not alone but I'm able to manage. I assume you're NOT setting a multi-tenant system. Here's some things to look for: Check the Variables (conf/vars.xml): domain=${local_ip_v4} domain_name=${domain} Then check this line in conf/sip_profiles/default.xml: domain=${domain} Check these lines too: sip-ip=${local_ip_v4} rtp-ip=${{local_ip_v4} You may delete/disable these : ext-sip-ip ext-rtp-ip Delete the created files and folder 10.50.1.151. They will conflict conf/default.xml. Check Advanced>Domains. If it's set 10.50.1.151, I think that entry created these directory and file. Try to set this to "default". Restart the system. Hope you'll get started. /Nandy On Fri, Apr 4, 2014 at 12:48 AM, Adelia C. <hexade@hotmail.com<mailto:hexade@hotmail.com>> wrote: Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users. Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right. Question 1: Keep getting this message: "[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151<mailto:1000@10.50.1.151>] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials." I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem. Question 2: As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there. Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added? Thank you. A.C. _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
i don't recommend using the core-odbc-support, your better off using postgres via odbc. On Apr 4, 2014, at 5:01 PM, Moishe Grunstein <max@nysolutions.com> wrote:
You would be better off using Postgres than MYSQL, MYSQL would need odbc, postgres can be compiled in the core
Thanks,
Moishe Grunstein Tornado Computer Systems, Inc. 212.400.7650 888.IPPBX.US Service Request Email: support@nysolutions.com Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified <image001.jpg> Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Adelia C. Sent: Friday, April 04, 2014 4:08 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying?
Before starting with a clean "conf", I gave it another try - logged out and back into FusionPBX and lo' and behold - all my users and devices were there. Domains, too.
I opened one of the domains to look at it - and for some reason, instead of pushing "back", I pushed "save". All config in the GUI - gone again.
Same thing that happened yesterday but I wasn't paying attention and know what triggered that behavior. Logged out and in again - users, etc - all visible. I can repeat that pretty consistently. Maybe I am doing something wrong but - as a beginner - this fazed me. I don't understand what I am doing wrong. I am still logged in as a sysadmin. I had already run "chmod -R 777" on /directory, based on some wiki pages. Nor sure why this is happening.
As part of the install, I selected MyQSL and not sqlite (some wiki pages suggest that would be a bad idea). One more bit of info (at this time I don't really know what is significant and what not) - I wanted to enable more debug and went to switch.conf.xml to enable <param name="debug-level" value="10"/> I got swamped by "Reuse Unused Cached DB handle" from the callcenter module. I don't need that functionality, my install is just 2-3 days so I ignored older threads on how to deal with this. I reset my debug level to get rid of the noise.
Going to try everyone suggested yesterday and today.
Thx, A.C.
Date: Fri, 4 Apr 2014 08:31:04 +0800 From: nandy1925@gmail.com To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying?
You're not alone but I'm able to manage. I assume you're NOT setting a multi-tenant system. Here's some things to look for:
Check the Variables (conf/vars.xml): domain=${local_ip_v4} domain_name=${domain}
Then check this line in conf/sip_profiles/default.xml: domain=${domain}
Check these lines too: sip-ip=${local_ip_v4} rtp-ip=${{local_ip_v4}
You may delete/disable these : ext-sip-ip ext-rtp-ip
Delete the created files and folder 10.50.1.151. They will conflict conf/default.xml. Check Advanced>Domains. If it's set 10.50.1.151, I think that entry created these directory and file. Try to set this to "default".
Restart the system. Hope you'll get started.
/Nandy
On Fri, Apr 4, 2014 at 12:48 AM, Adelia C. <hexade@hotmail.com> wrote: Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users. Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right.
Question 1: Keep getting this message: "[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials."
I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem.
Question 2: As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there.
Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added?
Thank you. A.C.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.orghttp://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-usersUNSUBSCRIBE:htt... http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I installed the odbc and it worked somewhat fine.How do I delete the db I installed as part of the FusionPBX install? How would I delete the entire thing? Just clean my freeswitch directories? I don't see a fusionpbx one.Sorry, new (again) to Linux. I thought FusionPBX would make my life easier but now even a re-install is not as I expected. It detects the existing DB and doesn't overwrite it - probably that's the desired behavior but I can't get rid of it I want to. So, having the ODBC part figured out, how do I delete and re-install the DB? Thanks,A From: mike@jerris.com Date: Fri, 4 Apr 2014 17:35:45 -0400 To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? i don't recommend using the core-odbc-support, your better off using postgres via odbc. On Apr 4, 2014, at 5:01 PM, Moishe Grunstein <max@nysolutions.com> wrote:You would be better off using Postgres than MYSQL, MYSQL would need odbc, postgres can be compiled in the core Thanks, Moishe GrunsteinTornado Computer Systems, Inc.212.400.7650 888.IPPBX.US Service Request Email: support@nysolutions.comPolycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified<image001.jpg>Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Adelia C. Sent: Friday, April 04, 2014 4:08 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? Before starting with a clean "conf", I gave it another try - logged out and back into FusionPBX and lo' and behold - all my users and devices were there. Domains, too. I opened one of the domains to look at it - and for some reason, instead of pushing "back", I pushed "save".All config in the GUI - gone again. Same thing that happened yesterday but I wasn't paying attention and know what triggered that behavior.Logged out and in again - users, etc - all visible. I can repeat that pretty consistently. Maybe I am doing something wrong but - as a beginner - this fazed me. I don't understand what I am doing wrong. I am still logged in as a sysadmin.I had already run "chmod -R 777" on /directory, based on some wiki pages. Nor sure why this is happening. As part of the install, I selected MyQSL and not sqlite (some wiki pages suggest that would be a bad idea).One more bit of info (at this time I don't really know what is significant and what not) - I wanted to enable more debug and went to switch.conf.xml to enable <param name="debug-level" value="10"/> I got swamped by "Reuse Unused Cached DB handle" from the callcenter module. I don't need that functionality, my install is just 2-3 days so I ignored older threads on how to deal with this. I reset my debug level to get rid of the noise. Going to try everyone suggested yesterday and today. Thx,A.C. Date: Fri, 4 Apr 2014 08:31:04 +0800 From: nandy1925@gmail.com To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying?You're not alone but I'm able to manage. I assume you're NOT setting a multi-tenant system. Here's some things to look for: Check the Variables (conf/vars.xml):domain=${local_ip_v4}domain_name=${domain} Then check this line in conf/sip_profiles/default.xml:domain=${domain} Check these lines too:sip-ip=${local_ip_v4} rtp-ip=${{local_ip_v4} You may delete/disable these :ext-sip-ipext-rtp-ip Delete the created files and folder 10.50.1.151. They will conflict conf/default.xml.Check Advanced>Domains. If it's set 10.50.1.151, I think that entry created these directory and file. Try to set this to "default". Restart the system. Hope you'll get started. /Nandy On Fri, Apr 4, 2014 at 12:48 AM, Adelia C. <hexade@hotmail.com> wrote:Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node.However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users.Should I look at any other GUIs? I am running against time, as I need it functioning in a few days.My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right. Question 1:Keep getting this message:"[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151] from 10.50.1.151You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials." I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder).Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem. Question 2:As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there. Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added? Thank you.A.C. _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.orghttp://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-usersUNSUBSCRIBE:htt... http://www.freeswitch.org___________________________________________________... Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
You would delete the DB the same way you delete any other db, sqlite db is just a file, mysql and Postgres have db management tools you need to use. You would find much more Fusion help using their IRC channel, this mailing list is more geared to Freeswitch itself. See http://wiki.fusionpbx.com/index.php?title=Main_Page#Support And see http://www.fusionpbx.com Thanks, Moishe Grunstein Tornado Computer Systems, Inc. 212.400.7650 888.IPPBX.US Service Request Email: support@nysolutions.com<mailto:support@nysolutions.com> Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified [cid:image001.jpg@01C72F94.9EE45D60]<http://www.nysolutions.com/> Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Adelia C. Sent: Friday, April 04, 2014 6:14 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? I installed the odbc and it worked somewhat fine. How do I delete the db I installed as part of the FusionPBX install? How would I delete the entire thing? Just clean my freeswitch directories? I don't see a fusionpbx one. Sorry, new (again) to Linux. I thought FusionPBX would make my life easier but now even a re-install is not as I expected. It detects the existing DB and doesn't overwrite it - probably that's the desired behavior but I can't get rid of it I want to. So, having the ODBC part figured out, how do I delete and re-install the DB? Thanks, A ________________________________ From: mike@jerris.com<mailto:mike@jerris.com> Date: Fri, 4 Apr 2014 17:35:45 -0400 To: freeswitch-users@lists.freeswitch.org<mailto:freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? i don't recommend using the core-odbc-support, your better off using postgres via odbc. On Apr 4, 2014, at 5:01 PM, Moishe Grunstein <max@nysolutions.com<mailto:max@nysolutions.com>> wrote: You would be better off using Postgres than MYSQL, MYSQL would need odbc, postgres can be compiled in the core Thanks, Moishe Grunstein Tornado Computer Systems, Inc. 212.400.7650 888.IPPBX.US Service Request Email: support@nysolutions.com<mailto:support@nysolutions.com> Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified <image001.jpg><http://www.nysolutions.com/> Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS From: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Adelia C. Sent: Friday, April 04, 2014 4:08 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? Before starting with a clean "conf", I gave it another try - logged out and back into FusionPBX and lo' and behold - all my users and devices were there. Domains, too. I opened one of the domains to look at it - and for some reason, instead of pushing "back", I pushed "save". All config in the GUI - gone again. Same thing that happened yesterday but I wasn't paying attention and know what triggered that behavior. Logged out and in again - users, etc - all visible. I can repeat that pretty consistently. Maybe I am doing something wrong but - as a beginner - this fazed me. I don't understand what I am doing wrong. I am still logged in as a sysadmin. I had already run "chmod -R 777" on /directory, based on some wiki pages. Nor sure why this is happening. As part of the install, I selected MyQSL and not sqlite (some wiki pages suggest that would be a bad idea). One more bit of info (at this time I don't really know what is significant and what not) - I wanted to enable more debug and went to switch.conf.xml to enable <param name="debug-level" value="10"/> I got swamped by "Reuse Unused Cached DB handle" from the callcenter module. I don't need that functionality, my install is just 2-3 days so I ignored older threads on how to deal with this. I reset my debug level to get rid of the noise. Going to try everyone suggested yesterday and today. Thx, A.C. ________________________________ Date: Fri, 4 Apr 2014 08:31:04 +0800 From: nandy1925@gmail.com<mailto:nandy1925@gmail.com> To: freeswitch-users@lists.freeswitch.org<mailto:freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? You're not alone but I'm able to manage. I assume you're NOT setting a multi-tenant system. Here's some things to look for: Check the Variables (conf/vars.xml): domain=${local_ip_v4} domain_name=${domain} Then check this line in conf/sip_profiles/default.xml: domain=${domain} Check these lines too: sip-ip=${local_ip_v4} rtp-ip=${{local_ip_v4} You may delete/disable these : ext-sip-ip ext-rtp-ip Delete the created files and folder 10.50.1.151. They will conflict conf/default.xml. Check Advanced>Domains. If it's set 10.50.1.151, I think that entry created these directory and file. Try to set this to "default". Restart the system. Hope you'll get started. /Nandy On Fri, Apr 4, 2014 at 12:48 AM, Adelia C. <hexade@hotmail.com<mailto:hexade@hotmail.com>> wrote: Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users. Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right. Question 1: Keep getting this message: "[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151<mailto:1000@10.50.1.151>] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials." I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem. Question 2: As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there. Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added? Thank you. A.C. _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com<http://www.freeswitchsolutions.com/> FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com<http://www.cudatel.com/> Official FreeSWITCH Sites http://www.freeswitch.org<http://www.freeswitch.org/> http://wiki.freeswitch.org<http://wiki.freeswitch.org/> http://www.cluecon.com<http://www.cluecon.com/> FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org<http://www.freeswitch.org/> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com<http://www.freeswitchsolutions.com/> FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com<http://www.cudatel.com/> Official FreeSWITCH Sites http://www.freeswitch.org<http://www.freeswitch.org/>http://wiki.freeswitch.org<http://wiki.freeswitch.org/> http://www.cluecon.com<http://www.cluecon.com/> FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-usersUNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users<http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org<http://www.freeswitch.org/> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Go into mysql and drop the database. Adelia C. <hexade@hotmail.com> wrote:
I installed the odbc and it worked somewhat fine.How do I delete the db I installed as part of the FusionPBX install? How would I delete the entire thing? Just clean my freeswitch directories? I don't see a fusionpbx one.Sorry, new (again) to Linux. I thought FusionPBX would make my life easier but now even a re-install is not as I expected. It detects the existing DB and doesn't overwrite it - probably that's the desired behavior but I can't get rid of it I want to. So, having the ODBC part figured out, how do I delete and re-install the DB? Thanks,A
From: mike@jerris.com Date: Fri, 4 Apr 2014 17:35:45 -0400 To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying?
i don't recommend using the core-odbc-support, your better off using postgres via odbc. On Apr 4, 2014, at 5:01 PM, Moishe Grunstein <max@nysolutions.com> wrote:You would be better off using Postgres than MYSQL, MYSQL would need odbc, postgres can be compiled in the core Thanks, Moishe GrunsteinTornado Computer Systems, Inc.212.400.7650 888.IPPBX.US Service Request Email: support@nysolutions.comPolycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified<image001.jpg>Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Adelia C. Sent: Friday, April 04, 2014 4:08 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? Before starting with a clean "conf", I gave it another try - logged out and back into FusionPBX and lo' and behold - all my users and devices were there. Domains, too. I opened one of the domains to look at it - and for some reason, instead of pushing "back", I pushed "save".All config in the GUI - gone again. Same thing that happened yesterday but I wasn't paying attention and know what triggered that behavior.Logged out and in again - users, etc - all visible. I can repeat that pretty consistently. Maybe I am doing something wrong but - as a beginner - this fazed me. I don't understand what I am doing wrong. I am still logged in as a sysadmin.I had already run "chmod -R 777" on /directory, based on some wiki pages. Nor sure why this is happening. As part of the install, I selected MyQSL and not sqlite (some wiki pages suggest that would be a bad idea).One more bit of info (at this ti! me I don't really know what is significant and what not) - I wanted to enable more debug and went to switch.conf.xml to enable <param name="debug-level" value="10"/> I got swamped by "Reuse Unused Cached DB handle" from the callcenter module. I don't need that functionality, my install is just 2-3 days so I ignored older threads on how to deal with this. I reset my debug level to get rid of the noise. Going to try everyone suggested yesterday and today. Thx,A.C. Date: Fri, 4 Apr 2014 08:31:04 +0800 From: nandy1925@gmail.com To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying?You're not alone but I'm able to manage. I assume you're NOT setting a multi-tenant system. Here's some things to look for: Check the Variables (conf/vars.xml):domain=${local_ip_v4}domain_name=${domain} Then check this line in conf/sip_profiles/default.xml:domain=${domain} Check these lines too:sip-ip=${local_ip_v4} rtp-ip=${{local_ip_v4} You may delete/disable these :ext-sip-ipext-rtp-ip Delete the created files and folder 10.50.1.151. They will conflict conf/default.xml.Check Advanced>Domains. If it's set 10.50.1.151, I think that entry created these directory and file. Try to set this to "default". Restart the system. Hope you'll get started. /Nandy
On Fri, Apr 4, 2014 at 12:48 AM, Adelia C. <hexade@hotmail.com> wrote:Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node.However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users.Should I look at any other GUIs? I am running against time, as I need it functioning in a few days.My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right. Question 1:Keep getting this message:"[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151] from 10.50.1.151You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials." I tried all kind of things - adding files left and ! right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder).Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem. Question 2:As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there. Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added? Thank you.A.C. _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.orghttp://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-usersUNSUBSCRIBE:htt... http://www.freeswitch.org___________________________________________________... Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ---------------------------------------------------- Alternatives:
---------------------------------------------------- _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici covici@ccs.covici.com
Delete the database, delete the fusionpbx page resources/config.php and re-install via gui browser. I'm not sure if re-installing via web gui will overwrite the ODBC database tables in case the database is not deleted. My experience is with sqlite db. On Sat, Apr 5, 2014 at 6:14 AM, Adelia C. <hexade@hotmail.com> wrote:
I installed the odbc and it worked somewhat fine. How do I delete the db I installed as part of the FusionPBX install?
How would I delete the entire thing? Just clean my freeswitch directories? I don't see a fusionpbx one. Sorry, new (again) to Linux. I thought FusionPBX would make my life easier but now even a re-install is not as I expected. It detects the existing DB and doesn't overwrite it - probably that's the desired behavior but I can't get rid of it I want to.
So, having the ODBC part figured out, how do I delete and re-install the DB?
Thanks, A
------------------------------ From: mike@jerris.com Date: Fri, 4 Apr 2014 17:35:45 -0400
To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying?
i don't recommend using the core-odbc-support, your better off using postgres via odbc.
On Apr 4, 2014, at 5:01 PM, Moishe Grunstein <max@nysolutions.com> wrote:
You would be better off using Postgres than MYSQL, MYSQL would need odbc, postgres can be compiled in the core
Thanks,
Moishe Grunstein Tornado Computer Systems, Inc. 212.400.7650 888.IPPBX.US *Service Request Email: support@nysolutions.com <support@nysolutions.com>* Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified <image001.jpg> <http://www.nysolutions.com/> Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS
*From:* freeswitch-users-bounces@lists.freeswitch.org [ mailto:freeswitch-users-bounces@lists.freeswitch.org<freeswitch-users-bounces@lists.freeswitch.org> ] *On Behalf Of *Adelia C. *Sent:* Friday, April 04, 2014 4:08 PM *To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying?
Before starting with a clean "conf", I gave it another try - logged out and back into FusionPBX and lo' and behold - all my users and devices were there. Domains, too.
I opened one of the domains to look at it - and for some reason, instead of pushing "back", I pushed "save". All config in the GUI - gone again.
Same thing that happened yesterday but I wasn't paying attention and know what triggered that behavior. Logged out and in again - users, etc - all visible. I can repeat that pretty consistently. Maybe I am doing something wrong but - as a beginner - this fazed me. I don't understand what I am doing wrong. I am still logged in as a sysadmin. I had already run "chmod -R 777" on /directory, based on some wiki pages. Nor sure why this is happening.
As part of the install, I selected MyQSL and not sqlite (some wiki pages suggest that would be a bad idea). One more bit of info (at this time I don't really know what is significant and what not) - I wanted to enable more debug and went to switch.conf.xml to enable <param name="debug-level" value="10"/> I got swamped by "*Reuse Unused* Cached DB handle" from the callcenter module. I don't need that functionality, my install is just 2-3 days so I ignored older threads on how to deal with this. I reset my debug level to get rid of the noise.
Going to try everyone suggested yesterday and today.
Thx, A.C.
------------------------------
Date: Fri, 4 Apr 2014 08:31:04 +0800 From: nandy1925@gmail.com To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? You're not alone but I'm able to manage. I assume you're NOT setting a multi-tenant system. Here's some things to look for:
Check the Variables (conf/vars.xml): domain=${local_ip_v4} domain_name=${domain}
Then check this line in conf/sip_profiles/default.xml: domain=${domain}
Check these lines too: sip-ip=${local_ip_v4} rtp-ip=${{local_ip_v4}
You may delete/disable these : ext-sip-ip ext-rtp-ip
Delete the created files and folder 10.50.1.151. They will conflict conf/default.xml. Check Advanced>Domains. If it's set 10.50.1.151, I think that entry created these directory and file. Try to set this to "default".
Restart the system. Hope you'll get started.
/Nandy
On Fri, Apr 4, 2014 at 12:48 AM, Adelia C. <hexade@hotmail.com> wrote: Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users. Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right.
Question 1: Keep getting this message: "[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials."
I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem.
Question 2: As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there.
Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added?
Thank you. A.C.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.orghttp://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Fusion install scripts use ./configure --enable-core-pgsql-support https://wiki.freeswitch.org/wiki/PostgreSQL_in_the_core which seems to work great. Thanks, Moishe Grunstein Tornado Computer Systems, Inc. 212.400.7650 888.IPPBX.US Service Request Email: support@nysolutions.com<mailto:support@nysolutions.com> Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified [cid:image001.jpg@01C72F94.9EE45D60]<http://www.nysolutions.com/> Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Friday, April 04, 2014 5:36 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? i don't recommend using the core-odbc-support, your better off using postgres via odbc. On Apr 4, 2014, at 5:01 PM, Moishe Grunstein <max@nysolutions.com<mailto:max@nysolutions.com>> wrote: You would be better off using Postgres than MYSQL, MYSQL would need odbc, postgres can be compiled in the core Thanks, Moishe Grunstein Tornado Computer Systems, Inc. 212.400.7650 888.IPPBX.US Service Request Email: support@nysolutions.com<mailto:support@nysolutions.com> Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified <image001.jpg><http://www.nysolutions.com/> Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS From: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Adelia C. Sent: Friday, April 04, 2014 4:08 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? Before starting with a clean "conf", I gave it another try - logged out and back into FusionPBX and lo' and behold - all my users and devices were there. Domains, too. I opened one of the domains to look at it - and for some reason, instead of pushing "back", I pushed "save". All config in the GUI - gone again. Same thing that happened yesterday but I wasn't paying attention and know what triggered that behavior. Logged out and in again - users, etc - all visible. I can repeat that pretty consistently. Maybe I am doing something wrong but - as a beginner - this fazed me. I don't understand what I am doing wrong. I am still logged in as a sysadmin. I had already run "chmod -R 777" on /directory, based on some wiki pages. Nor sure why this is happening. As part of the install, I selected MyQSL and not sqlite (some wiki pages suggest that would be a bad idea). One more bit of info (at this time I don't really know what is significant and what not) - I wanted to enable more debug and went to switch.conf.xml to enable <param name="debug-level" value="10"/> I got swamped by "Reuse Unused Cached DB handle" from the callcenter module. I don't need that functionality, my install is just 2-3 days so I ignored older threads on how to deal with this. I reset my debug level to get rid of the noise. Going to try everyone suggested yesterday and today. Thx, A.C. ________________________________ Date: Fri, 4 Apr 2014 08:31:04 +0800 From: nandy1925@gmail.com<mailto:nandy1925@gmail.com> To: freeswitch-users@lists.freeswitch.org<mailto:freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] FusionPBX - any other options or should I keep trying? You're not alone but I'm able to manage. I assume you're NOT setting a multi-tenant system. Here's some things to look for: Check the Variables (conf/vars.xml): domain=${local_ip_v4} domain_name=${domain} Then check this line in conf/sip_profiles/default.xml: domain=${domain} Check these lines too: sip-ip=${local_ip_v4} rtp-ip=${{local_ip_v4} You may delete/disable these : ext-sip-ip ext-rtp-ip Delete the created files and folder 10.50.1.151. They will conflict conf/default.xml. Check Advanced>Domains. If it's set 10.50.1.151, I think that entry created these directory and file. Try to set this to "default". Restart the system. Hope you'll get started. /Nandy On Fri, Apr 4, 2014 at 12:48 AM, Adelia C. <hexade@hotmail.com<mailto:hexade@hotmail.com>> wrote: Using FusionPBX to configure a FreeSwitch PBX. I find it a pain on its own league. I was successful in configuring a proof of concept by manually changing the Freeswitch XML files on the node. However, I need a GUI as I want to do the basic config and pass it over to admins, with clear and simple instructions on how to add new users. Should I look at any other GUIs? I am running against time, as I need it functioning in a few days. My SIP clients are SJPhones and Cisco 7942. They just don't register, I don't seem to get the passwords right. Question 1: Keep getting this message: "[WARNING] sofia_reg.c:2745 Can't find user [1000@10.50.1.151<mailto:1000@10.50.1.151>] from 10.50.1.151 You must define a domain called '10.50.1.151' in your directory and add a user with the id="1000" attribute and you must configure your device to use the proper domain in it's authentication credentials." I tried all kind of things - adding files left and right (a 10.50.1.151 directory was added for me + an empty file with the same name, in the same folder). Found an older thread and tried to follow it but no luck: http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/090948.h... If I try to use domains instead of IP addresses (in sip clients config, etc), I have the same problem. Question 2: As soon as I start manually modifying and adding config files on FreeSwitch, my FusionPBX configured devices/users/domains/extensions no longer show up in the FusionPBX GUI but the files are still there. Do I have a better option? I find FusionPBX isn't really helping or making it easier to configure the PBX. At this time, do I have an option to manually configure everything (directly on Freeswitch) and get things going and then bring in a GUI that retrieves all the config, displays it and allows for new users to be added? Thank you. A.C. _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com<http://www.freeswitchsolutions.com/> FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com<http://www.cudatel.com/> Official FreeSWITCH Sites http://www.freeswitch.org<http://www.freeswitch.org/> http://wiki.freeswitch.org<http://wiki.freeswitch.org/> http://www.cluecon.com<http://www.cluecon.com/> FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org<http://www.freeswitch.org/> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com<http://www.freeswitchsolutions.com/> FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com<http://www.cudatel.com/> Official FreeSWITCH Sites http://www.freeswitch.org<http://www.freeswitch.org/>http://wiki.freeswitch.org<http://wiki.freeswitch.org/> http://www.cluecon.com<http://www.cluecon.com/> FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-usersUNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users<http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org<http://www.freeswitch.org/> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (9)
-
Adelia C.
-
covici＠ccs.covici.com
-
Liam Carter
-
Michael Jerris
-
Moishe Grunstein
-
Nandy Dagondon
-
Phil Mickelson
-
Richard Mace
-
Russell Treleaven