Hello! My network enviroment is: PRI --- Cisco 5350 --- FreeSwitch (Version 1.0.head (git-1c95ad9 2011-01-20 22-43-50 -0300)) --- AudioCodes MP-118FXS. There is an IVR on FreeSwitch where calling party may press a key for personal client line or wait for a secretary. Sometimes (as client said) the call to line 5 is placed to line 3 (as I undestand DTMF 5 is recognized as 3). How may I detect and solve the problem? Configurations below: Cisco 5350: dial-peer voice 4000 voip description OUTBOUND-CALLS-FROM-USI destination-pattern 50000#.T voice-class codec 1 session protocol sipv2 session target ipv4:82.193.138.187:5060 dtmf-relay rtp-nte fax-relay ecm disable fax rate 9600 fax protocol t38 ls-redundancy 5 hs-redundancy 0 fallback pass-through g711alaw no vad FreeSwitch: profile: <param name="dtmf-duration" value="2000"/> <!-- <param name="dtmf-type" value="rfc2833"/> --> (yes, it is commented) context: <extension name="ext_001"> <condition field="destination_number" expression="^(73435230100)$"> <action application="set" data="v_tagnet_ats_dstport=10005"/> <action application="set" data="v_ats_dstport=10005"/> <action application="set" data="import=v_tagnet_dstport,v_ats_dstpor t"/> <!-- <action application="set" data="import=v_tagnet_ats_dstport"/> --> <action application="set" data="hangup_after_bridge=true"/> <!-- <action application="set" data="continue_on_fail=USER_NOT_REGIS TERED"/> --> <action application="set" data="ringback=$${ru-ring}"/> <action application="javascript" data="${scripts_dir}/common/set_dpe.js B ui.tagnet.cc 3 3"/> <action application="answer"/> <action application="sleep" data="1000"/> <action application="play_and_get_digits" data="1 1 1 5000 # /opt/fs/sounds/ntmjui/welcome.wav silence_stream://250 digits \d* 3000"/> <action application="execute_extension" data="ext_call_internal"/> <action application="bridge" data="${sofia_contact(101@ui.tagnet.cc)}" /> <action application="hangup"/> </condition> </extension> -- Regards, Boris