On 20 February 2010 22:25, Russell Mosemann <Russell.Mosemann@cune.org> wrote:
I believe it is, with the specific error you mention, "Cannot get a RING_START event on a non-fxo channel".
That error was clear. I was able to solve the issue when I saw that, without having to look up the documentation in fact. Only I spent ages before I received this error, trying to debug the other ports with the phone lines connected. These ports didn't give any errors, except for stuff I can ignore. Based on the other responses I have got here, it appears other people were confused too. Lets see if I have got this correct: Ports 1 & 2 are FXS, but use FXO signalling. So, yes I do plug a phone into these. Ports 3 & 4 are FXO, but use FXS signalling. So I plug the phone line into these. I will update the wiki, but there is still one part I don't understand, see the example at the end here: <http://wiki.freeswitch.org/wiki/Openzap.conf.xml_Examples> I assume ports 1&2 (with 3-way and moh set) are the FXS ports that use the FXO signalling? i.e. the same numbering as what I have? Do I really need to set moh for every line in this file? Looking at the openzap part of the wiki, the only thing I see related is "I didn't understand why we have to swap the channel numbers for FXS and FXO." There is also a link to http://unixtoys.ca/wordpress/2008/09/freeswitch-and-tdm-hardware-pots-fxofxs... which looks like it would have helped but unfortunately the link appears to be broken. Am going to try and update these issues now. -- Brian May <brian@microcomaustralia.com.au>