I'm having an issue where originate_timeout doesn't seem to be working as I think it would. I am using lcr to get the gateways. I can bridge to either gateway1 or 2 just fine. Then I set it up with bridge using both gateways for failover and it worked fine. I decided to change gateway1 to a fake IP to test failover and it works, but it takes 30 seconds to timeout. I then found originate_timeout and set it to 4 seconds, but it doesn't timeout. It still takes 30 seconds. Here is the snippet from my dialplan: <action application="set" data="originate_timeout=4"/> <action application="bridge" data="${lcr_route_1}|${lcr_route_2}"/> Here is the debug that shows it is being set: EXECUTE sofia/internal/1111@192.168.1.108 set(originate_timeout=4) 2010-04-28 16:06:28.265187 [DEBUG] mod_dptools.c:818 sofia/internal/1111@192.168.1.108 SET [originate_timeout]=[4] EXECUTE sofia/internal/1111@192.168.1.108 bridge([lcr_carrier=tex,lcr_rate=0.01900]sofia/gateway/Tex/5551212|[lcr_carr ier=tel,lcr_rate=0.03000]sofia/gateway/Tel/5551212) Then I get this: 2010-04-28 16:07:00.273156 [NOTICE] sofia.c:4547 Hangup sofia/external/5551212 [CS_CONSUME_MEDIA] [RECOVERY_ON_TIMER_EXPIRE] And it successfully goes out gateway2, but it is 30 seconds later, not 4 as I would guess. Am I using the timeout wrong? Or is there some other setting I need instead?