Bear in mind that FS will accept both 2833 and INFO in any profile on an inbound call. Param "dtmf-type" is valid only for outbound calls from the profile. Ognjen On Thu, Dec 3, 2009 at 6:11 AM, Yehavi Bourvine <yehavi.bourvine@gmail.com>wrote:
Hello,
I have Polycom phones which send only RFC-2833 (or inband which I dislike) and they should go out to the PSTN via a Cisco gateway. The Cisco gateway has some bug and accepts only INFO.
I did a few tests:
- Some of the phones are on different profile than the Cisco. On their profile I set 'dtmf-type=rfc2833' and on the Cisco's profile I set 'dtmf-type=info' and Freeswitch did the translation. All works ok... - Some of the phones are on the same profile as the Cisco, so I must set dtmf-type to rfc2833; it works with internal applications (like voicemail) but does not work through the Cisco as it misinterprets the rfc2833
Is there a way to set some variable (or a parameter to the bridge application) to do the translation?
Thanks! __Yehavi:
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org