Hi, I cannot get fetch the data in db_data from the dialplan. The ODBC is running and has been tested. I have not found any documentation on what the 'hostname' column in the db_data table should be - so I just put what the server has right now ('freeswitch01') - is that ok? This is what I am doing in the dialplan: <extension name="incoming_did"> <condition field="${sip_received_ip}" expression="^1.2.3.\d+$"/> <condition field="destination_number" expression="^(\d+)$"> <action application="info"/> <action application="set" data="sip_to_user=${db(select/forward/${sip_to_user})}"/> <action application="bridge" data="sofia/gateway/main_trunk/9999$1"/> </condition> </extension> 1.2.3 are the first four digits of the IP address I get the call from - this works, have tested it with a hardcoded forward. The call sent to FS has the To User set to 2000000. I use this to identify the user sending the call, and then want to look in db_data to find out which number the call should be forwarded to. So 2000000 would be the data_key and the value/data is the number to forward to. What I want to get out of it, is that a bridge is made to sofia/gateway/main_trunk/9999forward_number, where the forward_number is the value/data retrieved from db_data, and 9999 is the prefix for the termination partner (this works, has been tested). Input would really be appreciated! Thanks, A.