On Thursday 16 September 2010 02:57 PM, abubacker wrote:
On Tuesday 14 September 2010 01:22 PM, abubacker wrote:
Dear all, I just try to push a call in to the queue using execute function and it works , but the same thing was not working for executeAsync function and dont know why its behaving like this ? , can any one help me out! Thanks in Advance !.
$con->execute("fifo","urvq in"); # works $con->executeAsync("fifo","urvq in"); # not works
fs_cli -------------- Dialplan: sofia/internal/1001@192.168.6.182 Regex (PASS) [socket examples] ${destination_number}(235) =~ /^235$/ break=on-false Dialplan: sofia/internal/1001@192.168.6.182 Action socket(127.0.0.1:8040) 2010-09-14 11:50:59.789373 [DEBUG] switch_core_state_machine.c:119 (sofia/internal/1001@192.168.6.182) State Change CS_ROUTING -> CS_EXECUTE 2010-09-14 11:50:59.789373 [DEBUG] switch_core_session.c:1039 Send signal sofia/internal/1001@192.168.6.182 [BREAK] 2010-09-14 11:50:59.789373 [DEBUG] switch_core_state_machine.c:341 (sofia/internal/1001@192.168.6.182) State ROUTING going to sleep 2010-09-14 11:50:59.789373 [DEBUG] switch_core_state_machine.c:314 (sofia/internal/1001@192.168.6.182) Running State Change CS_EXECUTE 2010-09-14 11:50:59.789373 [DEBUG] switch_core_state_machine.c:348 (sofia/internal/1001@192.168.6.182) State EXECUTE 2010-09-14 11:50:59.789373 [DEBUG] mod_sofia.c:235 sofia/internal/1001@192.168.6.182 SOFIA EXECUTE 2010-09-14 11:50:59.789373 [DEBUG] switch_core_state_machine.c:157 sofia/internal/1001@192.168.6.182 Standard EXECUTE EXECUTE sofia/internal/1001@192.168.6.182 socket(127.0.0.1:8040) 2010-09-14 11:50:59.799364 [DEBUG] switch_ivr.c:551 sofia/internal/1001@192.168.6.182 Command Execute answer() EXECUTE sofia/internal/1001@192.168.6.182 answer() 2010-09-14 11:50:59.809359 [DEBUG] sofia_glue.c:2682 AUDIO RTP [sofia/internal/1001@192.168.6.182] 192.168.6.182 port 20780 -> 192.168.6.163 port 8000 codec: 8 ms: 20 2010-09-14 11:50:59.809359 [DEBUG] switch_rtp.c:1430 Starting timer [soft] 160 bytes per 20ms 2010-09-14 11:50:59.810360 [DEBUG] sofia_glue.c:2892 Set 2833 dtmf send payload to 101 2010-09-14 11:50:59.810360 [DEBUG] sofia_glue.c:2897 Set 2833 dtmf receive payload to 101 2010-09-14 11:50:59.810360 [DEBUG] mod_sofia.c:677 Local SDP sofia/internal/1001@192.168.6.182: v=0 o=FreeSWITCH 1284429879 1284429880 IN IP4 192.168.6.182 s=FreeSWITCH c=IN IP4 192.168.6.182 t=0 0 m=audio 20780 RTP/AVP 8 101 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - a=ptime:20 a=sendrecv
2010-09-14 11:50:59.810360 [DEBUG] switch_core_session.c:658 Send signal sofia/internal/1001@192.168.6.182 [BREAK] 2010-09-14 11:50:59.810360 [DEBUG] switch_channel.c:2542 (sofia/internal/1001@192.168.6.182) Callstate Change RINGING -> ACTIVE 2010-09-14 11:50:59.811360 [DEBUG] sofia.c:4318 Channel sofia/internal/1001@192.168.6.182 entering state [completed][200] 2010-09-14 11:50:59.811360 [NOTICE] mod_dptools.c:746 Channel [sofia/internal/1001@192.168.6.182] has been answered 2010-09-14 11:50:59.812361 [DEBUG] switch_core_session.c:877 Send signal sofia/internal/1001@192.168.6.182 [BREAK] 2010-09-14 11:50:59.833391 [DEBUG] sofia.c:4318 Channel sofia/internal/1001@192.168.6.182 entering state [ready][200]
Did any one come across a scenario like this ?
Pleae tell me that why cannot we use Async operation to push a call into the queue -- Best regards, N.Abubacker , Associate system engineer , bk systems pvt ltd , Ph : 9144-43902701 Disclaimer: http://www.bksystems.co.in/email-policy