Am 07.07.2012 01:19, schrieb Moises Silva:
On Thu, Jul 5, 2012 at 7:33 AM, Marcus Mülbüsch < muelbuesch@as-infodienste.de> wrote:
Hello all,
yes, for hardware reasons (very old Sangoma card with very old firmware) I have to use OpenZAP instead of freetTDM.
So, when setting the effective_caller_id that value isn't used. See that part of my dialplan here:
Please use pastebin.com and provide relevant debug logs.
How are you testing that it does not work?
Thank you, you'll find the freeswitch.log here: http://pastebin.com/mz5fSVwA openzap.conf and openzap.conf.cml are here: http://pastebin.com/7WYVitLN and http://pastebin.com/F1zB6hQq zt.conf and wanpipe.conf are here. http://pastebin.com/5M3ezCPv We're using freeswitch 1.0.4 (Sorry again) and WANPIPE Release: 3.3.14.11 The call comes in via an FXS Analog Line on a Digium TDM 2400P and gets bridged to the ISDN line to a local mobile phone. The number is not changed to the number set but remains the number allocated to the fixed line. Thanks for any pointers, Marcus