You need to put on the PATH (to find binaries) and LD_LIBRARY_PATH (to find the .so) on the installation directory. From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Andrew Keil Sent: 06 December 2016 23:27 To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: [Freeswitch-users] Re- FreeSWITCH 1.6.13 on CentOS 6.8 and mod_flite build issue To FreeSWITCH users, I understand that there is a need to move to CentOS 7 for FreeSWITCH, however my client cannot do this currently. I have tried to get mod_flite to build inside FreeSWITCH 1.6.13 on CentOS 6.8 I get the following when running FreeSWITCH make after ./configure: making all mod_flite make[3]: Entering directory `/usr/local/src/freeswitch/src/mod/asr_tts/mod_flite' Makefile:800: *** You must install libflite-dev to build mod_flite. Stop. make[3]: Leaving directory `/usr/local/src/freeswitch/src/mod/asr_tts/mod_flite' make[2]: *** [mod_flite-all] Error 1 make[2]: Leaving directory `/usr/local/src/freeswitch/src/mod' make[1]: *** [mod_flite] Error 2 make[1]: Leaving directory `/usr/local/src/freeswitch/src/mod' make: *** [mod_flite] Error 2 Since there is no libflite-devel package for CentOS 6 I did the following successfully: cd /usr/src wget http://files.freeswitch.org/downloads/libs/flite-2.0.0.tar.gz tar -xzvf flite-2.0.0.tar.gz cd flite-2.0.0 ./configure --enable-shared --prefix=/usr/local make && make install This worked OK and setup everything inside /usr/local/lib However when I try to run ./configure and make inside the FreeSWITCH source directory again I get the same error above. Any ideas? Kind Regards, Andrew Keil Visytel Pty Ltd [visytellogo] www.visytel.com<http://www.visytel.com/> Mobile: +61 (0) 429 076 431 Skype: visytel This e-mail message may contain confidential and commercially sensitive information. If you are not the intended recipient, any use, interference with, disclosure or copying of this material is unauthorised and prohibited. If you receive this e-mail message by mistake, please contact Visytel Pty Ltd on +61 429 076 431. This email is confidential and may be subject to privilege. If you are not the intended recipient, please do not copy or disclose its content but contact the sender immediately upon receipt.
