-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, sorry for my last post here. It was wrong. So here the correct message ;) I fixed it. Problem is, that my zaptel API, which was automaticly compiled and configured by sangoma's wanpipe driver setup, creates all channel devices in /dev/zap with numbers as filename. freeswitch's openzap module expects the channel devices directly under /dev with the name format wptdm_sXcY, where X=span number and Y=channel number. So I changed libs/openzap/src/zap.wanpipe.c around line 319 from snprintf(fname, FNAME_LEN, "/dev/wptdm_s%dc%d",span,chan); to snprintf(fname, FNAME_LEN, "/dev/zap/%d",chan); additionally all devices in /dev/zap have to be accessible for freeswitch's user. After recompiling and reinstall of mod_openzap I got this loglines in freeswitch console: 2008-05-20 17:34:08 [NOTICE] switch_loadable_module.c:380 switch_loadable_module_process() Adding Management interface 'mod_sofia' OID[.1.3.6.1.4.1.27880.1] 2008-05-20 17:34:08 [INFO] zap_wanpipe.c:364 wp_open_range() configuring device s1c1 as OpenZAP device 1:1 fd:38 [..] 2008-05-20 17:34:08 [INFO] zap_wanpipe.c:364 wp_open_range() configuring device s1c16 as OpenZAP device 1:31 fd:68 2008-05-20 17:34:08 [INFO] zap_io.c:1984 load_config() Configured 31 channel(s) 2008-05-20 17:34:08 [CONSOLE] switch_loadable_module.c:749 switch_loadable_module_load_file() Successfully Loaded [mod_openzap] So far it looks quite good to me. I think it's good to have the device path configurable as long as I did not a mistake configuring wanpipe. regards Helmut Helmut Kuper schrieb: | Hi, | | I found that the console lines | | 2008-05-20 16:30:59 [ERR] zap_zt.c:721 zt_init() Cannot open control device | 2008-05-20 16:30:59 [ERR] zap_io.c:2050 zap_global_init() Error | initilizing zt. | | | Were caused by having wrong permissions on /dev/zap/ctl. That device | must be accessible by freswitch's user. | | | The "2008-05-20 16:30:59 [ERR] zap_wanpipe.c:414 wp_open_range() failure | configuring device ..." problems are still there. | | regards | helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.8 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkgy+z0ACgkQ4tZeNddg3dz0WwCgn/ASHRZWc2nV7x18NRbKBkRU 4vsAoI6Vd5WnfKcL9dstsonL2I8WoWjh =/uCB -----END PGP SIGNATURE-----