I hope my question was clear...i meant that how should i enable the sim ,that i had put in dongle, make and receive calls through freeswitch.?? On Aug 25, 2013 2:02 AM, "Ashish Mishra" <itsme.kunnu@gmail.com> wrote:
Thanks jayanath But i mean how to enable the sim u had used in the dongle for making calls through mod_gsmopen make and receive calls ?
Regards Ashish Mishra On Aug 25, 2013 1:21 AM, "Jayanth Acharya" <jayachar88@gmail.com> wrote:
Using the default dialplan. I have only 1 dongle at the moment, so doing a telephone -> telephone mapping won't work (well, at least, based on what I've understood so far -- I could be wrong). Tomorrow, I plan to walk through the dialplan to understand it somewhat better. My eyes don't take XML too kindly !!
As such no significant changes. The only few hiccups to build, and the previous segfault I got, I filed a JIRA for, and that has the steps I took and my preliminary findings. http://jira.freeswitch.org/browse/FS-5721 http://jira.freeswitch.org/browse/FS-5727
I used a trick I found in the mail archives to use "wvdial" to identify the control port. After that, set the usb ports for control/audio correctly in the gsmopen.conf.xml file. After this the module started getting loaded properly, but I noticed that the signal strength was too low. Post that, I had to use a long USB extension cable to keep the dongle outside the window, and ensured that signal strength (RSSI) was good enough. After this, the rig started working.
On Sun, Aug 25, 2013 at 12:31 AM, Ashish Mishra <itsme.kunnu@gmail.com>wrote:
Hi jaynath May i ask you what what was was the dialplan which you had used to call <any indian phone number> to <any indian phone number> in your mod_gsmopen. Also what did you do with error u received day before yesterday....???
Regards Ashish Mishra On Aug 25, 2013 12:05 AM, "Jayanth Acharya" <jayachar88@gmail.com> wrote:
Finally, found success with mod_gsmopen. Have to say that there's a tonne of information in the Wiki, and it takes a newbie some time to get to understand even the elementary things. Jumping right in, assuming defaults to take care of everything, doesn't work. I believe that was thanks to being connected to the conference bridge 888@sip.freeswitch.net (if I noted the SIP URI correctly).Next tried another inbound call, and this time, I heard only silence.
Then I tried sending an SMS. That went out fine and was received instantaneously by the destination number. After that, I replied back to the dongle's number, and had a telnet session open listening on the events (none arrived), but that telnet session was closed, and turning to the FS console, I saw that it too had closed with a segmentation fault. So seems like receiving the SMS precipitated a core.
Anyone seen similar behaviour ? Should I go ahead an file another JIRA bugreport ? File one yesterday regarding another segmentation fault. Note, I am on Git HEAD (or was, day before, when I cloned it).
thanks, Jay
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org