Hi, Is there anything special I need to do to enable caller id on a Sanagoma A200 analog card? Everything is working with this card except for incoming caller id. I have <param name="enable-callerid" value="true"/> in the fxo section of my conf/autoload/freetdm.conf.xml. By the way, I have also tried underscore....I've seen it both ways on Sangoma's site and the wiki. I put a snippet of the log here: http://pastebin.com/nAsr0wQj There's plenty mention of GET_CALLERID but when it comes time to refer to the caller it always comes up 'unknown' like so. [INFO] mod_dialplan_xml.c:558 Processing unknown <unknown>->212XXXXXXX in context public By the way, this is using Version 1.5.8b git a26fdca, and this is in the NYC area. I'm assuming we get the fsk between rings one and two. I though it's curious that I haven't had to specify what type of caller id I'm using in wanpipe via wancfg_fs, wancfg or in FS. I did see references to bell202 and other types in the wanpipe api sources. Does FS tell wanpipe to use Bellcore by default? Thanks much in advance, Peter Hartmann Hartmann Computer Consulting http://blog.hartmanncomputer.com