Hi, Please, I was wondering if there is anything obvious that we are missing when trying to record a G729 call with asynchronous pimes (in: 20ms, out: 60ms). The problem case call flow is: inbound leg (ptime 20 ms), start recording, playback a short message, bridge to outbound (destination can only handle a ptime of 60 ms). We are using mod_com_g729's codec. The audio while on the call in normally fine (rarely there is one way speech depending on inbound/outbound provider), but *the recording has a garbled outbound (Callee) leg* (inbound/Caller voice is fine.). We have tried all the combinations of G729@20i, G729@60i, rtp-autofix-timing, and default-ptimes to no avail. We are using git HEAD. I do see this on fs_cli: 2012-06-07 16:56:45.543269 [INFO] mod_com_g729.c:78 ENCODER DESTROYX - 0xa8894898 (nil) 2012-06-07 16:56:45.543269 [INFO] mod_com_g729.c:79 DECODER DESTROYX - 0xa8894898 (nil) 2012-06-07 16:56:45.583270 [WARNING] mod_sofia.c:1158 *Asynchronous PTIME not supported, changing our end from 20 to 60* 2012-06-07 16:56:45.583270 [DEBUG] sofia_glue.c:2931 Changing Codec from G729@20ms@8000hz to G729@60ms@8000hz 2012-06-07 16:56:45.623271 [INFO] mod_com_g729.c:78 ENCODER DESTROYX - 0xa86fe340 0xa86f1e78 Should this be working, are we missing something obvious? Thank you, Kind regards, Colin