More info: Two things: found the great diagnostics information at <http://wiki.freeswitch.org/wiki/Auto_NAT> wiki don't mention you need to use fs_cli for this.. anyway, this one says: sofia status gateway secnap.com ================================================================================================= Name secnap.com Scheme Digest Realm 10.72.0.2:5080 Username username Password yes From <sip:fromuser@192.168.0.2;transport=udp> Contact <sip:gw+secnap.com@204.89.241.135:5060;transport=udp> (note: this is just wrong. the public ip is 204.89.241.151.. but still.. I want secnap.com, internal, to Contact me back at 192.168.0.2 Exten username To sip:username@192.168.0.2:5080 Proxy sip:192.168.0.2:5080 Context public Expires 600 Freq 600 Ping 0 PingFreq 0 State NOREG Status UP CallsIN 0 CallsOUT 0 ================================================================================================= On 8/26/10 5:47 PM, Michael Scheidell wrote:
I don't want FS1 who talks to FS2 to try to use the PUBLIC rtp port. but I can't seem to see how.
-- Michael Scheidell, CTO o: 561-999-5000 d: 561-948-2259 ISN: 1259*1300
*| *SECNAP Network Security Corporation
* Certified SNORT Integrator * 2008-9 Hot Company Award Winner, World Executive Alliance * Five-Star Partner Program 2009, VARBusiness * Best in Email Security,2010: Network Products Guide * King of Spam Filters, SC Magazine 2008 ______________________________________________________________________ This email has been scanned and certified safe by SpammerTrap(r). For Information please see http://www.secnap.com/products/spammertrap/ ______________________________________________________________________