Hello, Just noticed zaptel was renamed dahdi. What am I doing wrong? 2010-03-17 19:11:32.505233 [DEBUG] zap_config.c:56 Configuration file is /opt/freeswitch/conf/modules.conf. 2010-03-17 19:11:32.506233 [NOTICE] zap_io.c:3048 Modules configured: 1 2010-03-17 19:11:32.506233 [DEBUG] zap_config.c:56 Configuration file is /opt/freeswitch/conf/openzap.conf. 2010-03-17 19:11:32.506233 [DEBUG] zap_io.c:2578 found config for span 2010-03-17 19:11:32.506233 [NOTICE] ozmod_zt.c:1182 Using DAHDI control device 2010-03-17 19:11:32.507233 [INFO] zap_io.c:2849 Loading IO from /opt/freeswitch/mod/ozmod_zt.so [zt] 2010-03-17 19:11:32.507233 [DEBUG] zap_config.c:56 Configuration file is /opt/freeswitch/conf/zt.conf. 2010-03-17 19:11:32.507233 [INFO] ozmod_zt.c:556 Setting rxgain val to 0.000000 2010-03-17 19:11:32.507233 [INFO] ozmod_zt.c:565 Setting txgain val to 0.000000 2010-03-17 19:11:32.508233 [INFO] zap_io.c:2595 auto-loaded 'zt' 2010-03-17 19:11:32.508233 [DEBUG] zap_io.c:2616 created span 1 (FXS1) of type zt 2010-03-17 19:11:32.508233 [DEBUG] zap_io.c:2629 span 1 [name]=[Brian May] 2010-03-17 19:11:32.508233 [DEBUG] zap_io.c:2629 span 1 [number]=[1002] 2010-03-17 19:11:32.508233 [DEBUG] zap_io.c:2629 span 1 [fxs-channel]=[1] 2010-03-17 19:11:32.509233 [DEBUG] zap_io.c:2671 setting trunk type to 'FXS' start(KEWL) 2010-03-17 19:11:32.509233 [ERR] ozmod_zt.c:269 failure configuring device /dev/dahdi/channel chan 1 fd 64 (No such device or address) 2010-03-17 19:11:32.509233 [ERR] zap_io.c:1781 I/O backend does not support command 32! 2010-03-17 19:11:32.509233 [ERR] zap_io.c:1781 I/O backend does not support command 34! 2010-03-17 19:11:32.509233 [DEBUG] zap_io.c:2578 found config for span 2010-03-17 19:11:32.510233 [DEBUG] zap_io.c:2616 created span 2 (FXS2) of type zt 2010-03-17 19:11:32.510233 [DEBUG] zap_io.c:2629 span 2 [name]=[Brian May] 2010-03-17 19:11:32.510233 [DEBUG] zap_io.c:2629 span 2 [number]=[1002] 2010-03-17 19:11:32.510233 [DEBUG] zap_io.c:2629 span 2 [fxs-channel]=[2] 2010-03-17 19:11:32.510233 [DEBUG] zap_io.c:2671 setting trunk type to 'FXS' start(KEWL) 2010-03-17 19:11:32.511233 [ERR] ozmod_zt.c:269 failure configuring device /dev/dahdi/channel chan 2 fd 64 (No such device or address) 2010-03-17 19:11:32.511233 [ERR] zap_io.c:1781 I/O backend does not support command 32! 2010-03-17 19:11:32.511233 [ERR] zap_io.c:1781 I/O backend does not support command 34! 2010-03-17 19:11:32.511233 [DEBUG] zap_io.c:2578 found config for span 2010-03-17 19:11:32.511233 [DEBUG] zap_io.c:2616 created span 3 (FXO1) of type zt 2010-03-17 19:11:32.512233 [DEBUG] zap_io.c:2629 span 3 [name]=[OpenZAP] 2010-03-17 19:11:32.512233 [DEBUG] zap_io.c:2629 span 3 [number]=[0397551926] 2010-03-17 19:11:32.512233 [DEBUG] zap_io.c:2629 span 3 [fxo-channel]=[3] 2010-03-17 19:11:32.512233 [DEBUG] zap_io.c:2658 setting trunk type to 'FXO' start(KEWL) 2010-03-17 19:11:32.512233 [ERR] ozmod_zt.c:269 failure configuring device /dev/dahdi/channel chan 3 fd 64 (No such device or address) 2010-03-17 19:11:32.512233 [ERR] zap_io.c:1781 I/O backend does not support command 32! 2010-03-17 19:11:32.513233 [ERR] zap_io.c:1781 I/O backend does not support command 34! 2010-03-17 19:11:32.513233 [DEBUG] zap_io.c:2578 found config for span 2010-03-17 19:11:32.513233 [DEBUG] zap_io.c:2616 created span 4 (FXO2) of type zt 2010-03-17 19:11:32.513233 [DEBUG] zap_io.c:2629 span 4 [name]=[OpenZAP] 2010-03-17 19:11:32.513233 [DEBUG] zap_io.c:2629 span 4 [number]=[0397552345] 2010-03-17 19:11:32.514233 [DEBUG] zap_io.c:2629 span 4 [fxo-channel]=[4] 2010-03-17 19:11:32.514233 [DEBUG] zap_io.c:2658 setting trunk type to 'FXO' start(KEWL) 2010-03-17 19:11:32.514233 [ERR] ozmod_zt.c:269 failure configuring device /dev/dahdi/channel chan 4 fd 64 (No such device or address) 2010-03-17 19:11:32.514233 [ERR] zap_io.c:1781 I/O backend does not support command 32! 2010-03-17 19:11:32.514233 [ERR] zap_io.c:1781 I/O backend does not support command 34! 2010-03-17 19:11:32.515233 [INFO] zap_io.c:2773 Configured 0 channel(s) 2010-03-17 19:11:32.516233 [ERR] zap_io.c:3056 No modules configured! 2010-03-17 19:11:32.516233 [ERR] mod_openzap.c:3171 Error loading OpenZAP 2010-03-17 19:11:32.516233 [CRIT] switch_loadable_module.c:882 Error Loading module /opt/freeswitch/mod/mod_openzap.so **Module load routine returned an error** Is there anything else I need to change when going from zaptel to dahdi? The kernel modules seem to load ok, and /dev/dahdi/* looks good too. -- Brian May <brian@microcomaustralia.com.au>