Hello everybody from Guadalajara, Mexico. I have 2 pots lines connected to a Cisco SPA8800 and with the help of fs wiki site I was able to interface this device to fs. To make calls outside my office I created a file in /usr/local/freeswitch/conf/dialplan/default [root@pbx default]# pwd /usr/local/freeswitch/conf/dialplan/default [root@pbx default]# cat 00_spa8800_linea_1.xml <include> <extension name="axtel1"> <condition field="destination_number" expression="^1(\d{8,16})$"> <action application="bridge" data="sofia/internal/$1@10.10.100.24:5061" /> </condition> </extension> </include> As you see I have to dial "1" an then the phone number to be dialed. With this dialplan entry I am able to make local calls from my linksys SPA921 IP Phone without any problem. Now I am trying to make some long distance calls. The phone I was trying to call has 12 digits. The problem is that when I dial this 12 digit phone number, log messages in fs_cli console shows me that freeswtich only has 10 numbers to try to make the long distance call. If it helps when I dial this exact 12 digits phone in Xlite from my windows rig, it works without any problem, I can make my long distance call. This is Xlite log: http://pastebin.freeswitch.org/17626 This is SPA921 log: http://pastebin.freeswitch.org/17627 Thanks in advance for your kind help. Have a nice day.