Well actually you do have issues you're going to have to specify the rtp-ip and sip-ip on BOTH profiles yourself because you're config is currently putting your external IP into the internal's settings. Please correct that and I'm sure it'll work then. /b On Aug 26, 2009, at 9:18 AM, Alberto Escudero-Pascual (lists) wrote:
ASCII art follows
voip-phones..... 10.0.46.1 [ FS ] 216.82.231.69 ----> Internet
I have two profiles binded to two different IPs
internal is binded to 10.0.46.1 port 5060 /24 network external is binded to 216.82.231.69 port 5080
My IP phones are in the 10.0.46.X range and they register @ 10.0.46.1 IP address.
When I place a call between the two phones in the 10.0.46.0/24 network the phones register but audio RTP is sent to 216.82.231.69 instead of 10.0.46.1 (FS)
In this scenario i have FS without any NAT configuration.
-- The way that i solved was to run both profiles (internal and external) in the public IP (local_ipv4) and force the phones to register with 216.82.231.69 instead of 10.0.46.1
Thanks looong time!